TypeS BT530027 Bedienungsanleitung
Important, retain for future reference:
Read carefully
FHD BACKUP CAMERA
App Displays Full HD 1080P Rearview
WP ITM. BT530027
Care & Use Instructions
TABLE OF CONTENTS
1. Introduction ..........................................................................................................................................................................1
2. Package Contents ...............................................................................................................................................................2
3. Product Specications ......................................................................................................................................................3
4. Product Overview ................................................................................................................................................................3
5. Camera Status & LED Indicators......................................................................................................................................4
6. APP Installation .....................................................................................................................................................................4
7. Connect to Power.................................................................................................................................................................5
8. Installation Guide ................................................................................................................................................................7
9. Pairing the Camera .............................................................................................................................................................8
10. Settings and Operation ................................................................................................................................................10
11. Safety Information ..........................................................................................................................................................12
12. Maintenance & Warranty .............................................................................................................................................15
13. General Information ......................................................................................................................................................18
1
Please read all of the installation instructions carefully before installing the product. Improper
installation will void manufacturer’s warranty. The installation instructions do not apply to all types of
vehicles, and are written as guidelines to assist in installing the system.
Consult an experienced technician if you are not comfortable installing the product. You can also
contact TYPE S at 866.294.9244 to speak to one of our installation specialists if you have any specic
questions regarding the FHD Backup Camera.
BEFORE using the FHD Backup Camera, please read the safety information provided in this user
manual. ALWAYS use the product as outlined in this user manual.
Please make sure to read and understand all local laws and regulations regarding cameras and their
use in a vehicle. Laws vary by state.
1. INTRODUCTION
2
Hardwire Installation Kit
FHD Backup Camera
2. PACKAGE CONTENTS
3
3. PRODUCT SPECIFICATIONS
4. PRODUCT OVERVIEW
Frequency: 2.4 GHz
Camera Resolution: FHD 1080P
Camera View Angle: 120º
Camera Water Resistance Rating: IP67 Waterproof Rating
Operating Temperature: 14ºF ~ 122ºF (-10ºC ~ 50ºC)
Operating Voltage: DC 12 / 24V
Maximum Signal Range: 33 Feet / 10 Meters
(without interference or obstruction)
LED Light
Camera Lens
133mm / 5.23“ 45.6mm / 1.79“
53 mm
/ 2.08“
4
5. CAMERA STATUS & LED INDICATORS
Power / Mode Status LED Indicators
Power On Blue LED light stays on when the Backup Cam is powered on.
Power O LED light is o.
Firmware Update Blue LED light ashes until update is successful.
Install TYPE S DRIVE APP on your smartphone. Scan below QR code or search for the
TYPE S DRIVE APP in the APP Store or Google Play.
Once installed, open the APP and begin enjoying your TYPE S Drive APP.
6. APP INSTALLATION
TYPE S DRIVE
Compatible with iPhone 4s &
higher, iPad3, iPad Mini, iPad Air
& higher, and iPod touch 5th
Generation & higher. Requires
iOS 9.0 or higher.
Compatible with phones with
Android™ 5.0 or higher.
5
7. CONNECT TO POWER
Hardwire cable for Camera
Snap!
Reverse Light Power Wires
FHD BACKUP CAMERA INSTALLATION - Hardwire Power
This installation is based on powering the Camera over the reverse tail lights. When installed as directed, the
camera image will only appear when the vehicle is in reverse.
Caution: This unit is designed to operate on a 12V/24V DC NEGATIVE GROUND electrical system.
Connecting to other types of electrical systems will cause damage to your vehicle. Please contact
the manufacturer if you are unaware of the system type in your vehicle.
1. Remove your license plate
2. Determine the best route for the Camera Cable from the top of your license plate to the inside of the
vehicle. You may need to drill a small hole in the panel behind where the license plate is situated.
3. Take the Camera and run the cable through the Rubber Ring Grommet, then from the outside of your car
6
to the inside. Pull the cable through so that there is a small amount of slack and you can still move the
Camera around the license plate.
4. Locate the reverse taillights wiring behind your reverse light. You may need to remove the interior
panel in order to locate. You only need to attach the Camera to ONE of the reverse lights, not both. If
you cannot manually locate the taillight cables, please contact the vehicle manufacturer or reference a
wiring diagram for your vehicle.
5. At your taillight, remove the light bulb socket from the reverse light housing.
6. Determine the reverse light power wires for your car, designating the positive and negative wires.
If you are not sure of which are the power wires, then please contact your vehicle manufacturer or
reference a wiring diagram for your vehicle.
7. Connecting the Camera Power Cable:
a. Take the open wire end of this cable, and connect it to the power wires of your car (as
determined in step 4). Using the Snap Lock Splice Connectors, connect the Camera’s Red wire
to reverse light’s Positive wire. Connect the Camera’s Black Wire to reverse light’s Negative
wire.
b. Use pliers to squeeze the metal tabs of the Snap Lock Splice Connectors and ensure a solid
connection, then snap the plastic cover closed.
8. While sitting in the driver’s seat of the car with the key in the accessory position, open the TYPE S Drive
App on your smart phone and go to FHD Backup Camera section.
9. Put the vehicle in reverse. If you can see clear picture on the app screen, put the vehicle back in park
and turn the key to the o position. You are now ready for nal steps.
10. If you cannot see any image on the app view when you place your vehicle in reverse position, open the
WiFi setting page of your smart phone and make sure it is connected to“TYPE S Backup Camera WiFi”
directly (please refer to page 7 on setting up the app).
11. Use the provided zip ties to secure wires neatly within your car.
12. Replace the light socket back into the reverse light housing.
13. Replace any interior panels that may have been removed to access the taillight and close your trunk or
rear hatch.
7
1. Peel o the cover of the double-sided tape from the FHD Backup Camera and attach the Camera to the
license plate. Press rmly to the license plate to secure the Camera.
RECOMMENDATION: Thoroughly clean & dry the mounting surface area of the license plate
before attaching.
8. INSTALLATION GUIDE
2. Press the license plate and the Camera
rmly to the car to secure and get full
contact between the license plate and
the double-sided tape. Screw the license
plate back onto the rear of your vehicle.
3. As a last check, note the position of the
view from the Camera when you place
the vehicle in reverse. Adjust the angle
of the Camera as necessary to achieve the
best rear view.
8
9. PAIRING THE CAMERA
1. Open the TYPE S Drive APP and select
the Backup Camera category.
NOTE: Please turn on Bluetooth of your smart
device before pairing.
2. Select FHD Backup Camera from
the list of backup cameras. The App
will switch to the live view screen.
An image from the camera will not
be seen until the pairing process is
complete (Step #7).
3. On the live view screen tap the Setting
icon, it will bring you to the APP
permission setting page.
3
1 2
Setting iOS Device
Inhaltsverzeichnis
Sprachen:
Andere TypeS Digitalkamera Handbücher
