Tysso BLP-410 Bedienungsanleitung
Keep the user manual for future reference.
BLP-410
Thermal Transfer / Thermal Direct
1D & 2D
Barcode Label Printer
Installation Guide
Index
A. IMPORTANT SAFETY NOTIFICATION................1
B. PRODUCT OVERVIEW.........................................3
1Features................................................................3
2Packing..................................................................4
3Specification..........................................................5
4Product Description...............................................8
4.1 Product Overview .......................................... 8
4.2 Control Buttons ............................................ 12
4.3 LED & Audio Indicators............................... 13
4.4 I/O Ports........................................................ 16
C. PRINTER INSTALLATION ..................................18
1Connecting Your Printer.......................................18
2Install/Replace the Label Roll and Ribbon...........19
2.1 Install the Ribbon Roll.............................. 19
2.2 Install the Label Paper Roll...................... 25
APPENDIX................................................................31
1Self Test...............................................................31
1.1 Print Test..................................................31
1.2 DIP Switch & Baud Rate Settings............32
1.3 Debugging Mode .....................................35
2Reset Your Printer...............................................37
3Maintenance –Cleaning Your Printer..................38
3.1 The cleaning process...............................39
Tips: Cleaning the Inner of Printer.................... 40
-1 -
A. Important Safety Notification
Read the instruction manual carefully before use.
Keep the manual in the near location for further
reference.
Use only parts or accessories, especially power adapter,
recommended by the manufacturer; unapproved parts
may be hazardous and cause injures to the product or
human.
WARNING:
IF ANY FUNCTIONAL PROBLEMS OR DEFECTS
OCCUR WHICH ARE ATTRIBUTABLE TO
IMPROPER USE OF THE PRODUCT SHALL
VOID THE WARRANTY.
Refer servicing to qualified personnel only.
Do not attempt to repair or dissemble the product on
your own. Opening or removing cover can expose you
to dangerous voltage or other hazards.
Before plugging the power cord into theAC inlet of the
power supply unit, make sure that the voltage applied to
the power outlet is within the specified range
(100V~240V). Improper power source voltage range will
cause damage to the power supply unit.
Power off the product and remove the power adapter
while cleaning the product.
Before powering on the product, make sure all the
connectors, cables are firmly installed.
-2 -
Important Safety Notification
Do not expose the product to water or moisture, such as
a bathtub, a washbowl, a kitchen sink, a laundry tub,
and a swimming pool.
Do not expose the machine under direct sunlight, and
keep it away from any heat source.
Do not place the product on an unstable location, stand
or table. If the machine falls, it may injure a person or
cause serious damage to the appliance.
Do not allow anything to rest on the power cord.
Do not locate the product where people may walk on the
cord.
Do not make the power outlet and extension cords
overload. Overload can result in fire or electric shock.
If any of the following situations occurs, unplug the
product from the power outlet immediately and consult
with a qualified service person:
1. The power cord or plug is damaged or frayed.
2. Liquid is spilled into the product.
3. The product is dropped and damaged.
Use a soft cloth to clean the product when it is dirty. In
case the dirt is hard to remove, use a mild detergent and
wipe the product gently.
Turn OFF and unplug the product before cleaning.
When the product is not in use, please clean and stores
with care.
-3 -
B. Product Overview
1 Features
Thermal Transfer/Thermal Direct Printing Technology
Front-Dispensing Label Printing
Durable Housing Suitable for Industrial Applications
Print Speed: 2~6 inches/sec
Large Paper Roll Capacity
Audio Alert Notification
1D & 2D (QR Code) Barcode Printing Support
Image Printing (bmp, pcx format available)
Interface: Serial, Parallel, USB, LAN (optional)
Easy Paper Jam Elimination
Simple DIP switches configuration
Variety of Industrial Applications:
Manufacturing & Logistic Industry
Medical and Healthcare
Parcel Post
Office Management
Retail & Wholesale
-4 -
2 Packing
Printer Unit
*Power Cord
**Printer Cable
Thermal Ribbon
Holder
Label Roll
Holder Set
Power Adaptor
Thermal Ribbon
Quick
Installation
Guide
*Power Cord is selectable depending on the types of electrical plug.
** Printer cable is selectable depending on the interface required
(RS-232, Parallel or USB B-Type).
Please refer to the nearest local representatives for further
information.
-5 -
3 Specification
Model
BLP-410
Print Capabilities
Print Method
Thermal Transfer/Thermal Direct
Print Speed
2 ~ 6 inches/sec
Print Head Lifecycle
50 km
Print Resolution
203 dots/inch (8dots/mm)
Maximum Print Width
108 mm (4.25 inches)
Maximum Print Length
2286 mm (90 inches)
Print Font Character
Support
English, Simplified Chinese, Traditional
Chinese, Korean
Barcode
Support
1D
EAN-8, EAN-13, EAN 128, EAN 14, EAN
and UPC 2(5) digits add-on, Codabar,
Code 39, Code93, Code 128 subsets
A/B/C, China Postage, ITF, MSI, MSIC,
PLESSEY, ITF 14, UPC-A, UPC-E
2D
QR Code
Image Printing Format
BMP, PCX
Rotate Degree
Yes
(0, 90, 180, 270 degrees selectable)
interface
USB 2.0, Parallel,
RS-232 (DB9 Female)
LAN (Optional)※
System Support
Win 7, Win 8, Win 10
※The LAN Port is optional for custom model and is sealed
generally.
Please contact the local representative for further information.
-6 -
General
Power Input
+24VDC/2.0A
(with External Adapter 100 ~ 240VAC,
50/60Hz)
Color
Black
Material
ABS
Compliance
FCC, CE, WEEE, RoHS
Weight
2.09 kg
Dimension (mm)
222.94 (W) x 190 (H) x 284.83 (D)
Operating Temperature
5°C ~ 45°C
Operating Humidity
25% ~ 85% RH, non-condensing
Storage Temperature
-10°C ~ 50°C
Storage Humidity
10% ~ 90% RH, non-condensing
-7 -
Print Ribbon
The Ribbon Width
110 mm (max.)
30 mm (min.)
Ribbon Diameter
67 mm (max.)
Ribbon Axis Diameter
25.4 mm (1 inch)
Print Label/Print Paper
Paper Type
Continuous Paper, Gap Of Paper,
Paper Folding, Punched Paper
Paper Width
120 mm (4.72 inches, max.)
20 mm (0.78 inch, min.)
Paper Roll Diameter
127 mm (5 inches, max.)
Paper Thickness
(tag + bottom paper)
0.254 mm (10 mil, max.)
0.06 mm (2.36 mil, min.)
Paper Roll Axis
Diameter
25.4 mm ~ 38 mm
(1 inch ~ 1.5 inch)
Label Length
10 ~ 2286 mm
(0.39 inch ~ 90 inches)
Label Gape Spacing
2 mm (0.09 inch, min.)
Note:
If you use the tag length less than 25.4mm (1 "),
it is recommend to use a paper roll with perforated lines in the gap
on the label paper so that easy to tear.
* All specifications are subject to change without prior notice.
Inhaltsverzeichnis
Andere Tysso Etikettendrucker Handbücher
