U-Line BrightShield HRE524 Bedienungsanleitung

QUICK START GUIDE

30683 Rev_B

BrightShield™ Collection

QUICK START GUIDE u-line.com

USER GUIDE u-line.com

Introduction

WELCOME TO U-LINE

Congratulations on your U-Line purchase. Your product comes from a company with over ve decades of premium modular ice

making, refrigeration, and wine preservation experience. U-Line creates products focused on functionality, style, and inspired

innovations — paying close attention to even the smallest details. Applications include residential, outdoor, ADA height

compliant, marine, and commercial. Complete product categories include Beverage Centers, Wine Refrigerators, Ice Machines,

Refrigerators, Freezers, and Dispensers.

Our advanced refrigeration systems, large and exible capacities, and Built-In to Stand Out®clean integrated look allow you

to preserve the right product, in the right place, at the right temperature. Since 2014, U-Line has been part of the Middleby

family of brands. All products are designed, engineered, and assembled in Milwaukee, Wisconsin, USA, and select products

are available worldwide. U-Line - RIGHT PRODUCT. RIGHT PLACE. RIGHT TEMPERATURE®.

PRODUCT INFORMATION

Looking for additional information on your product? User Guides, Spec Sheets, CAD Drawings, Compliance Documentation,

and Product Warranty information are all available for reference and download at u-line.com.

PROPERTY DAMAGE / INJURY CONCERNS

In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following

steps:

1. U-Line Customer Care must be contacted immediately at +1.414.354.0300.

2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been

altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.

GENERAL INQUIRIES

U-Line Corporation

8900 N. 55th Street

Milwaukee, Wisconsin 53223 USA

Monday - Friday 8:00 am to 4:30 pm CST

T: +1.414.354.0300

Email: sales@u-line.com

u-line.com

CONNECT WITH US

SERVICE & PARTS ASSISTANCE

Monday - Friday 8:00 am to 4:30 pm CST

T: +1.414.354.0300

Service Email: onlineservice@u-line.com

Parts Email: onlineparts@u-line.com

Designed, engineered and assembled in WI, USA

QUICK START GUIDE u-line.com

This Quick Start Guide covers the basics of installation and general use of your product.

For more details, see the complete User Guide & Service Manual on u-line.com.

This product is eligible for an additional one-year warranty at no charge when you register your product on u-line.com.

See complete warranty for details.

CONTENTS

Safety and Warning 4

Environmental Requirements 5

Electrical 5

Water Hookup 6

Drain 9

Door Swing 10

Door Adjustments 11

General Installation 18

Anti-Tip Bracket 18

Integrated Panel Installation 20

Control Operation 21

BrightShield™ Information 25

First Use 25

Airow & Product Loading 26

Interior Adjustments 27

Ice 28

Cleaning 30

Warranty 35

QUICK START GUIDE u-line.com

Safety and Warning

NOTICE

Please read all instructions before installing,

operating, or servicing the appliance.

Use this appliance for its intended purpose only and follow

these general precautions with those listed throughout this

guide:

SAFETY ALERT DEFINITIONS

Throughout this guide are safety items labeled with a

Danger, Warning, or Caution based on the risk type:

Danger means that failure to follow this safety

statement will result in severe personal injury or

death.

Warning means that failure to follow this safety

statement could result in serious personal injury

or death.

Caution means that failure to follow this safety

statement may result in minor or moderate

personal injury, property, or equipment damage.

This unit contains R600a (Isobutane) which is a

ammable hydrocarbon. It is safe for regular

use. Do not use sharp objects to expedite

defrosting. Do not service without consulting the

“R600a specications” section included in the

User Guide. Do not damage the refrigerant

circuit.

Service must be done by factory authorized

service personnel. Any parts shall be replaced

with like components. Failure to comply could

increase the risk of possible ignition due to

incorrect parts or improper service.

CALIFORNIA PROPOSITION 65

This product contains chemicals known to the

state of California to cause cancer and birth

defects or other reproductive harm.

www.P65warnings.CA.gov

This equipment is to be installed with adequate

backow protection to comply with applicable

federal, state and local codes.

DANGER

WARNING

CAUTION

!CAUTION

WARNING

QUICK START GUIDE u-line.com

Environmental Requirements

This model is intended for indoor/interior applications only

and is not to be used in installations that are open/exposed

to natural elements.

This unit is designed to operate between 50°F (10°C) and

100°F (38°C). Higher ambient temperatures may reduce

the unit’s ability to reach low temperatures and/or reduce

ice production on applicable models.

For best performance, keep the unit out of direct sunlight

and away from heat generating equipment.

In climates where high humidity and dew points are

present, condensation may appear on outside surfaces.

This is considered normal. The condensation will evaporate

when the humidity drops.

Damages caused by ambient temperatures of

40°F (4°C) or below are not covered by the

warranty.

CAUTION

Electrical

SHOCK HAZARD - Electrical Groundining Required.

Never attempt to repair or perform maintenance

on the unit until the electricity has been

disconnected.

Never remove the round grounding prong from

the plug and never use a two-prong grounding

adapter.

Altering, cutting or removing power cord, remov-

ing power plug, or direct wiring can cause serious

injury, re, loss of property and/or life, and will

void the warranty.

Never use an extension cord to connect power to

the unit.

Always keep your working area dry.

NOTICE

Electrical installation must observe all state and

local codes. This unit requires connection to a

grounded (three-prong), polarized receptacle that

has been placed by a qualied electrician.

The unit requires a grounded and polarized 115 VAC,

60 Hz, 15A power supply (normal household current).

An individual, properly grounded branch circuit or circuit

breaker is recommended. A GFCI (ground fault circuit

interrupter) is usually not required for xed location ap-

pliances and is not recommended for your unit because it

could be prone to nuisance tripping. However, be sure to

consult your local codes.

See CUTOUT & PRODUCT DIMENSIONS for recommended

receptacle location.

WARNING

QUICK START GUIDE u-line.com

Water Hookup

NUGGET ICE MACHINES

PREPARE PLUMBING

The water valve uses a standard 1/4” (6.35 mm)

compression tting. U-Line recommends using accessory

water hook up kit – part # 80-54674-00. The kit includes

a 10’ (3 m) braided exible water supply line and a brass

hose tting.

Plumbing installation must observe all state

and local codes. All water and drain connections

MUST BE made by a licensed/qualied plumbing

contractor. Failure to follow recommendations

and instructions may result in damage and/or

harm.

Water Supply

When connecting the water supply, please note the

following:

• Water Mineral Content:

◦TDS: greater than 5 ppm (mg/l) but less than

400 ppm (mg/l)

◦Hardness: Less than 200 mg/l (12 gpg)

• Not recommended for use with softened water

• A TDS meter is included with your unit

• Water Treatment Options

◦TDS between 400-600 and/or hardness

between 13-20 can be treated by U-Line’s in-line water

filter accessories available at u-line.com or your local

dealer:

 ULALINEFILTER — Standard

 ULALINEFILTERL — Large

 ULALINEFILTERHEAD — 3/8” NPT, initial

setup requires head & filter

• Use bypass level 6

Water Quality 1-3 Users 4+ Users

400 TDS and/or 12

gpg hardness or less

Optional

Standard Filter

Change 1x per year

Optional

Large Filter

Change 1x per year

401-600 TDS and/or

13-20 gpg hardness

Required

Large Filter

Change 1x per year

Required

Large Filter

Change 2x per year

601+ TDS, and/or

21+ gpg hardness

Contact your local water professional

• The water pressure should be between 20 and 120 psi

(138 and 827 kPa).

• The water line MUST have a shut-o valve in the

supply line.

• The water line should be looped into 2 coils. This

will allow the unit to be removed for cleaning and

servicing. Make certain that the tubing is not pinched

or damaged during installation.

Do not use any plastic water supply line. The line

is under pressure at all times. Plastic may crack

or rupture with age and cause damage to your

home.

Do not use tape or joint compound when

attaching a braided exible water supply line

that includes a rubber gasket. The gasket

provides an adequate seal – other materials

could cause blockage of the valve.

Failure to follow recommendations and

instructions may result in damage and/or harm,

ooding or void the product warranty.

Use new hose set. Do not reuse old hose set.

Turn o water supply and disconnect electrical

supply to unit prior to installation.

Use caution when handling back panel. The edges

could be sharp.

HOOKUP WATER

1. Turn o water supply and disconnect electrical supply

to product prior to attempting installation.

2. Remove the back panel.

CAUTION

QUICK START GUIDE u-line.com

3. Thread water line through back panel hole (with

bushing).

4. Locate water valve inlet and connect to valve.

5. Turn on water supply and check for leaks.

6. Reinstall back panel.

CLEAR ICE MACHINES

PREPARE PLUMBING

The water valve uses a standard 1/4” (6.35 mm)

compression tting. U-Line recommends using accessory

water hook up kit – part # 80-54674-00. The kit includes

a 10’ (3 m) braided exible water supply line and a brass

hose tting.

Prior to installation, determine if this product

contains a gravity style drain or factory installed

drain pump. Products without a drain pump may

only use a gravity style drain. Failure to connect

water supply or drain line connections properly

may result in water leakage, personal injury,

and/or property damage. Disconnect power

and turn o water to the unit before attempting

to alter these connections. These connections

are the responsibility of the owner and must be

connected per local plumbing code. If you are

uncertain of how to safely and properly install

this product, contact a licensed plumber.

Water Supply Connection

Connect to potable water supply only.

Review, obey, and understand the local plumbing

codes before you install your unit. Connect to the

cold water supply. The water pressure should

be between 20 and 120 psi (138 and 827 kPa).

The water line MUST have a shut-o valve on the

supply line.

Do not use any plastic water supply line. The line

is under pressure at all times. Plastic may crack

or rupture with age and cause damage to your

home.

Do not use tape or joint compound when

attaching a braided exible water supply line

that includes a rubber gasket. The gasket

provides an adequate seal – other materials

could cause blockage of the valve.

Failure to follow recommendations and

instructions may result in damage and/or harm,

ooding or void the product warranty.

WARNING

CAUTION

QUICK START GUIDE u-line.com

Turn o water supply and disconnect electrical

supply to unit prior to installation.

Use caution when handling back panel. The edges

could be sharp.

1. Turn o water supply and disconnect electrical supply

to product prior to attempting installation.

2. Remove the grille/access panel in the front and the

back panel.

3. Locate water valve in the front of the unit and thread

water supply line through.

NOTICE

Route the water supply line through the unit

so it does not come into contact with any

internal components other than the solenoid

valve. Normal operation creates some vibration.

A water supply line contacting an internal

component or cabinet wall can cause excessive

noise during operation or damage to the line.

4. On the back panel, break away ller feature in bushing

with a at screwdriver.

CAUTION

USER GUIDE

Door Swing 2

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

3. Locate water

valve in the front

of the unit and

thread water

supply line

through.

NOTICE

Route the water

supply line

through the unit so it does not come into contact

with any internal components other than the

solenoid valve. Normal operation creates some

vibration. A water supply line contacting an

internal component or cabinet wall can cause

excessive noise during operation or damage to

the line.

4. On the back panel,

break away filler feature

in bushing with flat

screwdriver.

5. Thread water line

through back panel hole

(with bushing) and

connect to cold water

supply line.

6. Turn on water supply and check for leaks.

7. Reinstall back panel and grille/front access panel.

8. Install retaining clip.

Remove

ZLWKɠDW

screwdrive

USER GUIDE

Door Swing 2

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

3. Locate water

valve in the front

of the unit and

thread water

supply line

through.

NOTICE

Route the water

supply line

through the unit so it does not come into contact

with any internal components other than the

solenoid valve. Normal operation creates some

vibration. A water supply line contacting an

internal component or cabinet wall can cause

excessive noise during operation or damage to

the line.

4. On the back panel,

break away filler feature

in bushing with flat

screwdriver.

5. Thread water line

through back panel hole

(with bushing) and

connect to cold water

supply line.

6. Turn on water supply and check for leaks.

7. Reinstall back panel and grille/front access panel.

8. Install retaining clip.

Remove

ZLWKɠDW

screwdrive

USER GUIDE

Door Swing 2

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

3. Locate water

valve in the front

of the unit and

thread water

supply line

through.

NOTICE

Route the water

supply line

through the unit so it does not come into contact

with any internal components other than the

solenoid valve. Normal operation creates some

vibration. A water supply line contacting an

internal component or cabinet wall can cause

excessive noise during operation or damage to

the line.

4. On the back panel,

break away filler feature

in bushing with flat

screwdriver.

5. Thread water line

through back panel hole

(with bushing) and

connect to cold water

supply line.

6. Turn on water supply and check for leaks.

7. Reinstall back panel and grille/front access panel.

8. Install retaining clip.

Remove

ZLWKɠDW

screwdrive

USER GUIDE

Door Swing 2

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

3. Locate water

valve in the front

of the unit and

thread water

supply line

through.

NOTICE

Route the water

supply line

through the unit so it does not come into contact

with any internal components other than the

solenoid valve. Normal operation creates some

vibration. A water supply line contacting an

internal component or cabinet wall can cause

excessive noise during operation or damage to

the line.

4. On the back panel,

break away filler feature

in bushing with flat

screwdriver.

5. Thread water line

through back panel hole

(with bushing) and

connect to cold water

supply line.

6. Turn on water supply and check for leaks.

7. Reinstall back panel and grille/front access panel.

8. Install retaining clip.

Remove

ZLWKɠDW

screwdrive

5. Thread water line through back panel hole (with

bushing) and connect to cold water supply line.

6. Turn on water supply and check for leaks.

7. Reinstall back panel and grille/front access panel.

8. Install retaining clip.

QUICK START GUIDE u-line.com

The oor drain must be large enough to

accommodate drainage from all attached drains.

Follow these guidelines when installing drain

lines to prevent water from owing back into

the ice maker storage bin and/or potentially

owing onto the oor, which may result in

personal injury or property damage

Failure to connect water supply or drain line

connections properly can result in personal injury

and property damage. Gravity drain connections

must be routed downward from the rest of the

unit at the rate of 1/4” per foot (1 cm per 50 cm).

Drain can NOT be located directly below the

unit. Unit has a solid base that will not allow the

unit to drain below itself.

There is a possibility that hose connections may

have loosened during shipment.

Verify all connections and ttings are free from

leaks.

This equipment is to be installed with adequate

backow protection to comply with applicable

federal, state and local codes

DRAIN CONNECTION

NOTICE

Drain

CAUTION

If your drain line will run up to a stand pipe, disposal

or spigot assembly, or does not otherwise meet the

requirements for a gravity drain, you may have ordered a

pre-installed U-Line P60 drain pump.

If you need to install a P60 drain pump into your unit, see

DRAIN PUMP section in the User Manual.

See below for typical installations requiring a drain pump.

FACTORY INSTALLED DRAIN PUMP

Cold

Water

Hot

Water

Waste

Shut-Oﬀ

Valve

Air Gap

(Optional Hook-Up)

Cold

Water

Hot

Water

Waste

Shut-Oﬀ

Valve

Disposal Assembly

P60 Pump Required

The maximum lift for the P60 drain pump is

10 feet. This must be done as close to the rear of

the unit as possible.

NOTICE

Waste

Cold

Water

Shut-Oﬀ

Valve

Hot

Water

Air Gap

(Optional Hook-Up)

Y-Branch Tailpiece

P60 Pump Required

QUICK START GUIDE u-line.com

Door Swing

UNITS WITH TOP MOUNTED HINGES

UNITS WITH FRONT MOUNTED HINGES

USER GUIDE

Door Swing 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Door Swing

Wall Wall

Door Swing

2-1/8" Min.

(54 mm)

1/4" Min.

(6 mm)

Units have a zero clearance for the door to open 90°,

when installed adjacent to cabinets.

Stainless Steel and black and white models require

2-1/8" (54 mm) door clearance to accommodate the

handle if installed next to a wall.

Integrated models require 1/4" (6 mm) clearance if

installed next to a wall. Allow for additional space for any

knobs or pulls installed on the integrated panel/frame.

USER GUIDE

Door Swing

u-line.com

Door Swing

For Integrated models that are installed adjacent to a

wall, 1/2" (13 mm) clearance is recommended from wall

on hinge side to allow the door to open 90°. Allow for

additional space for any knobs or pulls installed on the

integrated panel/frame.

Stainless Steel models that are installed adjacent to a

wall require 2-1/4" (57 mm) door clearance on hinge side

to allow for door handle.

Units have a zero clearance when installed adjacent to

cabinets.

Wall Wall

90°

Door Swing

90°

Door Swing

Space Required

For any Knobs or Pulls

2-1/4" MIN

(57 mm MIN)

Integrated Solid

1/2" (13 mm)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere U-Line Kühlschrank Handbücher

U-Line

U-Line U-1224DWRINT-00B Installationshandbuch

U-Line

U-Line UHRE524-IS81A Installationshandbuch

U-Line

U-Line 2218R Installationshandbuch

U-Line

U-Line UORE124 Installationshandbuch

U-Line

U-Line U-3060DWRINT-00A Installationshandbuch

U-Line

U-Line 1224DWR Bedienungsanleitung

U-Line

U-Line UCBR592-SS01A Installationshandbuch

U-Line

U-Line UHRE524 Installationshandbuch

U-Line

U-Line UCWC518 Installationshandbuch

U-Line

U-Line U-1215RB-00B Installationshandbuch

U-Line

U-Line Marine Combo Series Installationshandbuch

U-Line

U-Line 2175DWRR Bedienungsanleitung

U-Line

U-Line 2224R Bedienungsanleitung

U-Line

U-Line 1000 SERIES Installationshandbuch

U-Line

U-Line 2115WC Bedienungsanleitung

U-Line

U-Line UODR124-SS61A Installationshandbuch

U-Line

U-Line 3036RRGL Bedienungsanleitung

U-Line

U-Line U-29RB-13A Installationshandbuch

U-Line

U-Line 2115RSOD Bedienungsanleitung

U-Line

U-Line Wine Captain UHWD524SG01A Installationshandbuch

U-Line

U-Line Echelon Combo C2275DWR Konfigurationshandbuch

U-Line

U-Line 1 Class UHRE124 Installationshandbuch

U-Line

U-Line UORE124 Installationshandbuch

U-Line

U-Line 1000 SERIES Installationshandbuch

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung