Ubiquiti RocketDish RD-2G24 Bedienungsanleitung

Installation Guide

Dish Series Antenna

Welcome

Thank you for purchasing this Ubiquiti Networks Backhaul Antenna.

This instruction is for model RD-2G24.

Tools Required for Mounting

1. Screw driver Phillips #1 (Qty. 1)

2. 16mm or 5/8 inch wrench (Qty. 1)

3. 24mm wrench (Qty. 1)

Support

Ubiquiti support engineers are located in the U.S. and in Europe and are

dedicated to helping customers resolve software, hardware compatibility, or

Internet: www.ubnt.com

Internet Support Forum: www.forum.ubnt.com

IMPORTANT NOTICE

Deformations in the shape will reduce the products effectiveness.

Contents Qty.

Feed

Main Mounting Bracket

Pole Bracket

Stabilizer Bracket

M16 Elevation Rod

M10X150 Bolt

M10X25 Bolt

M16 Nut

M16 Washer

M16 Spring Lock Washer

M10 Nut

M10 Washer

M10 Spring Lock Washer

M4 Bolt-Springlock-Washer Assembly

* Products may be different from pictures and are subject to change without prior notice

M10X100 Bolt 2

General Warranty:

UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) represents and warrants that the Products furnished hereunder shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS

under normal use and operation. UBIQUITI NETWORKS sole and exclusive obligation under the foregoing warranty shall be to repair or replace, at its option, any defective Product that fails during the warranty period. The expense of removal and

reinstallation of any item is not included in this warranty.

and performance of the Products. UBIQUITI NETWORKS reserves the right to inspect all defective Products (which must be returned by Buyer to UBIQUITI NETWORKS factory freight prepaid).

No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned to Buyer freight

collect. UBIQUITI NETWORKS shall have no obligation to make repairs or replacement necessitated by catastrophe, fault, negligence, misuse, abuse, or accident by Buyer, Buyer’s customers or any other parties. The warranty period of any repaired or

replaced. Product shall not extend beyond its original term.

Warranty Conditions

The foregoing warranty shall apply only if:

Disclaimer. UBIQUITI NETWORKS does not warrant that the operation of the products is error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating

to system performance, including coverage, buyer’s selection of products for buyer’s application and/or failure of products to meet government or regulatory requirements.

(I) The Product has not been subjected to misuse, neglect or unusual physical, electrical or electromagnetic stress, or some other type of accident.

(II) No modication, alteration or addition has been made to the Product by persons other than UBIQUITI NETWORKS or UBIQUITI NETWORKS’s authorized representatives or otherwise approved by UBIQUITI NETWORKS.

(III) The Product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation.

CB EF

G H K L M N O PI JA

Returns

In the unlikely event a defect occurs in this product, please work through the dealer or distributor from which this product was purchased.

M10X25 Bolt (Qty. 3)

M10 Washer (Qty. 3)

M10 Spring Lock Washer (Qty. 3)

M10 Nut (Qty. 3)

M16 Washer (Qty. 2)

M16 Spring Lock Washer (Qty. 1)

M16 Nut (Qty. 2)

6. Adjust Azimuth and Elevation

After a visual alignment of both elevation and azimuth, azimuth can be

adjusted by rotating the antenna while supported by the stabilizer bracket.

Elevation is adjusted by tightening/loosening the elevation rod.

When azimuth/elevation are set tighten nuts to approximately

14N-m(10 lb-ft) or less should the mounting pole show deformation.

5. Attach Antenna to Mounting Pole

Mounting bracket can accommodate 1.5"-4"pole.

Mount the antenna slightly above the stabilizer bracket as shown in gure 5

using the following parts:

M10X150 Bolt (Qty. 4)

M10 Washer (Qty. 4)

M10 Spring Lock Washer (Qty. 4)

M10 Nut (Qty. 4)

1. Install Feed to Dish

Install Feed to Dish by:

M4 Bolt-Springlock-Washer Assembly (Qty. 4)

The Dish/Feed are keyed so that the feed can only be installed one way.

To install, line up the alignment pin on the Dish with the hole on the Feed

as shown in gure 1.

B A

2. Install Main Mounting Bracket and Elevation Rod

Put M10X150 Bolt on the Main Mounting Bracket. Install

Main Mounting Bracket and Elevation Rod to Dish by:

Pivot Points should be loose to allow mounting frame to move so that

elevation rod can be installed.

3. Install Rocket

Install Rocket by lining up slots on Rocket/Dish Fast Mount. Slide into

place.

Locate the pigtail cables that came with the antenna feed. Create a

loop with the cables as shown in gure 3. Connect pigtail cables to

the Rocket connectors.

4. Attach Stabilizer Bracket to Pole

Select location for Dish antenna and attach the stabilizer bracket to

mounting pole just below where Dish will be installed as shown in gure 4.

Tighten to 14M-m (10 lb-ft). Install Stabilizer Bracket to pole by:

M10X100 Bolt (Qty. 2)

M10 Washer (Qty. 2)

M10 Spring Lock Washer (Qty. 2)

M10 Nut (Qty. 2)

H C

F A

G E

H L

M O N I

F JK

Andere Handbücher für RocketDish RD-2G24

Andere Ubiquiti Antenne Handbücher

Ubiquiti

Ubiquiti Horn-5-90 Bedienungsanleitung

Ubiquiti

Ubiquiti AirMax Sector Bedienungsanleitung

Ubiquiti

Ubiquiti AG-HP-5G27 Bedienungsanleitung

Ubiquiti

Ubiquiti AM-5G16-120 Bedienungsanleitung

Ubiquiti

Ubiquiti airMAX AM-5G20-90 Bedienungsanleitung

Ubiquiti

Ubiquiti AirMax AMY-9M16 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-16-POE Bedienungsanleitung

Ubiquiti

Ubiquiti AG-HP-2G20 Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam PBE-5AC-500-ISO Bedienungsanleitung

Ubiquiti

Ubiquiti IS-5AC Bedienungsanleitung

Ubiquiti

Ubiquiti W-DSL-2G16 Bedienungsanleitung

Ubiquiti

Ubiquiti airMAX AM-5G20-90 Bedienungsanleitung

Ubiquiti

Ubiquiti airMAX Sector AM-2G16-90 Bedienungsanleitung

Ubiquiti

Ubiquiti airMAX AM-5G19-120 Bedienungsanleitung

Ubiquiti

Ubiquiti AF-11G35 Bedienungsanleitung

Ubiquiti

Ubiquiti AF-5G23-S45 Gebrauchsanweisung

Ubiquiti

Ubiquiti airPrism AP-5AC-90-HD Bedienungsanleitung

Ubiquiti

Ubiquiti airMAX Omni AMO-5G10 Bedienungsanleitung

Ubiquiti

Ubiquiti AF-5G23-S45 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBridge M3 Bedienungsanleitung

Ubiquiti

Ubiquiti W-DSL-2G20 Bedienungsanleitung

Ubiquiti

Ubiquiti airMAX Titanium Sector Bedienungsanleitung

Ubiquiti

Ubiquiti RD-5G34 Bedienungsanleitung

Ubiquiti

Ubiquiti AM-5AC22-45 Bedienungsanleitung

Beliebte Antenne Handbücher anderer Marken

Alfa Network

Alfa Network APA-L01 Bedienungsanleitung

Naval

Naval PR-422CA Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Bedienungsanleitung

TERK Technologies

TERK Technologies TV44 Bedienungsanleitung

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Bedienungsanleitung

HP J8999A Bedienungsanleitung

MobilSat

MobilSat MSP-S Bedienungsanleitung

Steren

Steren ANT-UHF 13 Bedienungsanleitung

Novatel

Novatel 600-G Bedienungsanleitung

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Bedienungsanleitung

TRENDnet

TRENDnet TEW-AO12O Bedienungsanleitung

Radio Shack

Radio Shack 15-1837 Bedienungsanleitung

CommScope

CommScope CMAX-OMFX-43M-I53 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics DAP25 Bedienungsanleitung

COBHAM

COBHAM SAILOR 800 VSAT Gebrauchs- und Pflegehandbuch

Trango Systems

Trango Systems AD900-9 Bedienungsanleitung

Steren

Steren ANT-100 Bedienungsanleitung

Proxim

Proxim 5054-PA-23 Bedienungsanleitung