Ubiquiti UniFi US-8-60W Bedienungsanleitung

8-Port Managed Gigabit Switch

with 802.3af PoE

Model: US-8-60W

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi® 8-Port

Managed Gigabit Switch with 802.3af PoE. This Quick Start

Guide is designed to guide you through the installation and

also includes the warranty terms.

Package Contents

UniFi Switch

Mounting Screws

(Qty. 2)

Screw Anchors

(Qty. 2)

8-PortManaged Gigabit Switch

with802.3af PoE

Model:US-8-60W

Power Adapter Power Cord Quick Start Guide

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.6 (1.8 or newer recommended)

• Web Browser: Google Chrome (Other browsers may have

limited functionality)

• UniFi Controller software v5.3.x (or newer), available at:

downloads.ubnt.com/unifi

responsibility to follow local country regulations, including operation within legal frequency

channels, output power, indoor cabling requirements, and Dynamic Frequency Selection

(DFS) requirements.

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

Network Topology Requirements

• A DHCP-enabled network for the UniFi Switch to obtain an

IPaddress (connected devices will also obtain IP addresses

after deployment)

• A UniFi Cloud Key or management station running the UniFi

Controller software v5.3 (or newer), located either on-site

and connected to the same Layer2 network, or off-site in a

cloud or NOC

US-8-60W

USG

Internet

UAP-AC-PROUVC-G3-DOME

UAP-AC-IW

LAN

WAN

UniFi Cloud Key

(UniFi Controller)

Remote Access to

UniFi Controller

Sample Network Diagram

All UniFi devices support off-site management controllers.

For setup details, refer to the User Guide on the website:

documentation.ubnt.com/unifi

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

Hardware Overview

Front Panel

Ports 1-4 Ports 5-8

Port Description

1-4 RJ45 ports support 10/100/1000 Ethernet

connections.

5-8 RJ45 ports support 10/100/1000 Ethernet

connections and auto-sensing 802.3af PoE.

Back Panel

Reset

Button

PowerGround

Port Description

Ground Optional ancillary grounding point.

Power Connect the included Power Adapter to the

Power port.

Reset

Button

This button serves two functions for the UniFi

Switch:

• Restart Press and release the Reset button

quickly.

• Restore to Factory Default Settings Press

and hold the Reset button for more than five

seconds.

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

LEDs

System

System LED

State Status

Flashing White Initializing.

Steady White Factory defaults, waiting for integration.

Alternating

White/Blue

Device is busy; do not touch or unplug it.

This usually indicates that a process such

as a firmware upgrade is taking place.

Steady Blue Successfully integrated into a network

and working properly.

Flashing Blue This is used to locate a device.

When you click Locate in the UniFi

Controller software, the System LED

will flash blue. The software will also

display the location of the UniFi Switch

on themap.

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

RJ45 LEDs

PoE

Link/Speed/Activity

LED State Status

PoE

Off PoE Off

Amber PoE On (IEEE 802.3af)

Link/

Speed/

Activity

Off No Link

Amber Link Established at 10/100Mbps

Flashing Indicates Activity

Green Link Established at 1 Gbps

Flashing Indicates Activity

*640-00253-04*

640-00253-04

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

Side Panels

Ventilation Holes

WARNING: FAILURE TO PROVIDE PROPER VENTILATION

MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF

CLEARANCE NEXT TO THE VENTILATION HOLES FOR

ADEQUATE AIRFLOW.

WARNING: The US-8-60W must not be stacked. Do not

place it on top of another switch. Do not place anything

on top of the US-8-60W.

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

Hardware Installation

The UniFi Switch can be mounted on a vertical surface or

placed on a desktop. Follow the Wall Mounting instructions to

mount the switch using the included screws and anchors.

WARNING: To reduce the risk of fire or electric shock, do

not expose the switch to rain or moisture.

Wall Mounting

1. Drill two 6 mm holes set 73.5 mm apart.

73.5 mm

2. Insert a Screw Anchor into each hole, and fasten a Screw

into each anchor.

3. Leave a clearance of approximately 3mm between the

screw head and the wall.

3 mm

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

4. Mount the UniFi Switch by inserting the screw heads into

the mounting slots on the bottom of the switch. Then slide

the switch down to lock it in place.

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

Grounding (Recommended)

The UniFi Switch is grounded through the Power Adapter;

however, you can enhance ESD protection by connecting the

ancillary ground.

1. Loosen the ground screw and secure a ground wire (not

included) to the grounding point.

2. Secure the other end of the ground wire to a grounding

block or other grounded structure.

https://arttel.ru/

https://arttel.ru/shop/kommutatory/ubiquiti-unifi-switch-8-60w-5-pack

Andere Handbücher für UniFi US-8-60W

Inhaltsverzeichnis

Andere Ubiquiti Schalten Handbücher

Ubiquiti

Ubiquiti USW-24 Bedienungsanleitung

Ubiquiti

Ubiquiti ES-24-250W Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-8 Bedienungsanleitung

Ubiquiti

Ubiquiti UnFi US-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti UBNT-US-8-150W-US Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch Flex Mini Bedienungsanleitung

Ubiquiti

Ubiquiti EdgePoint S16 Bedienungsanleitung

Ubiquiti

Ubiquiti US-8-150W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 10 XP Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch ES-10XP Leitfaden

Ubiquiti

Ubiquiti UniFi USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti FiberPoE Bedienungsanleitung

Ubiquiti

Ubiquiti ES-24-250W Installationshandbuch

Ubiquiti

Ubiquiti TS-16-CARRIER Bedienungsanleitung

Ubiquiti

Ubiquiti UnFi US-8-60W Bedienungsanleitung

Ubiquiti

Ubiquiti US-16-XG Bedienungsanleitung

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Bedienungsanleitung

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Bedienungsanleitung

Ubiquiti

Ubiquiti US-16-XG Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch 48 US-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-Pro-24-POE Bedienungsanleitung

Ubiquiti

Ubiquiti US-16-XG Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch