Ubiquiti EdgeRouter ER-12P Bedienungsanleitung

EdgeRouter ER-12P Wall Mount Screws (Qty. 2) Wall Mount Anchors (Qty. 2)

Ground Screw Power Adapter (24V, 2.5A) Power Cord

Cable Clip

Package Contents

Installation Requirements

Wall mounting (optional)

Drill with 6 mm drill bit

Phillips screwdriver

ER-12P Quick Start Guide

Click for

Table of Contents

System LED

For indoor applications, use Category 5 (or above) UTP cabling approved for

indoor use.

For outdoor applications, shielded Category 5 (or above) cabling should be used

for all wired Ethernet connections and should be grounded through the AC ground

of the power supply.

We recommend that you protect your networks from harmful outdoor

environments and destructive ESD events with industrial-grade, shielded Ethernet

cable from Ubiquiti. For more details, visit: ui.com/toughcable

Hardware Overview

Flashing White Bootup in progress.

White

Ready for use, not connected to Ubiquiti® Network

Management System (UNMS™). See “UNMS

Management”.

Blue Ready for use, connected to UNMS.

Steady Blue with

Occasional Flashing

Ready for use, unable to connect to UNMS, check

connection to UNMS server.

Note: Although the cabling can be located outdoors, the EdgeRouter itself

should be housed inside a protective enclosure.

ER-12P Quick Start Guide

Click for

Table of Contents

RJ45 PoE LED (Ports 0 - 9)

RJ45 Speed/Link/Activity LED (Ports 0 - 9)

SFP Link/Activity LED (Ports 10 - 11)

Console

USB

RJ45 (Ports 0 - 9)

Quickly Flashing Blue Used to locate a device in UNMS.

Alternating

Blue/White Firmware upgrade in progress.

Off No PoE

Green 24V Passive PoE Output

Off No Link

Amber Link Established at 10/100 Mbps

Amber Flashing Link Activity at 10/100 Mbps

Green Link Established at 1000 Mbps (1 Gbps)

Green Flashing Link Activity at 1000 Mbps (1 Gbps)

Off No Link

Green Link Established at 1 Gbps

Green Flashing Link Activity at 1 Gbps

RJ45 serial console port for Command Line Interface (CLI) management.

Reserved for future use.

All RJ45 ports can be used for routing. They support 10/100/1000 Mbps Ethernet

connections and 24V Passive PoE output. Ports 0 - 7 can be configured for

switching functions using the EdgeOS® Configuration Interface.

ER-12P Quick Start Guide

Click for

Table of Contents

SFP (Ports 10 - 11)

Reset Button

Power

Grounding Point

SFP routing ports are hot-swappable and support Gigabit fiber SFP modules.

Click here to learn how to reset an EdgeRouter to factory defaults.

Connect the included Power Adapter to the Power port.

Ground bonding point for an optional ground wire.

Hardware Installation

Wall Mounting

ER-12P Quick Start Guide

Click for

Table of Contents

ER-12P Quick Start Guide

Click for

Table of Contents

ER-12P Quick Start Guide

Click for

Table of Contents

Grounding the EdgeRouter (Recommended)

The Power Adapter grounds the device; however, you can add optional ESD

grounding for enhanced ESD protection (ground wire not included).

ER-12P Quick Start Guide

Click for

Table of Contents

Optional

Connecting Power

ER-12P Quick Start Guide

Click for

Table of Contents

Using SFP Ports

ER-12P Quick Start Guide

Click for

Table of Contents

For information about compatible fiber SFP modules, visit:

ubnt.link/SFP_DAC_Compatibility

Accessing the EdgeOS Configuration Interface

The EdgeOS® configuration interface can be accessed via DHCP or static IP

address assignment. By default, eth1 is set up as a DHCP client, while eth0 is

assigned a static IP address of 192.168.1.1. To configure the EdgeRouter, proceed

to the appropriate section: DHCP or “Static IP Address”.

DHCP

1. Connect an Ethernet cable from eth1 on the EdgeRouter to a LAN segment that

has an existing DHCP server.

ER-12P Quick Start Guide

Click for

Table of Contents

Andere Handbücher für EdgeRouter ER-12P

Inhaltsverzeichnis

Andere Ubiquiti WLAN-Router Handbücher

Ubiquiti

Ubiquiti UniFi UAP Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Dream Machine Bedienungsanleitung

Ubiquiti

Ubiquiti UFiber UF-WIFI Bedienungsanleitung

Ubiquiti

Ubiquiti airRouter HP Bedienungsanleitung

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti air Router HP Bedienungsanleitung

Ubiquiti

Ubiquiti AirWire Bedienungsanleitung

Ubiquiti

Ubiquiti AirRouter Bedienungsanleitung

Ubiquiti

Ubiquiti AirRouter Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-Outdoor Bedienungsanleitung

Ubiquiti

Ubiquiti AirRouter Bedienungsanleitung

Ubiquiti

Ubiquiti AirRouter Bedienungsanleitung

Ubiquiti

Ubiquiti Edge Pro ERPro-8 Bedienungsanleitung

Ubiquiti

Ubiquiti AMPLIFI Bedienungsanleitung

Ubiquiti

Ubiquiti Amplifi AFI-HD Betriebsanleitung

Ubiquiti

Ubiquiti UAP Bedienungsanleitung

Ubiquiti

Ubiquiti AirRouterHP Bedienungsanleitung

Ubiquiti

Ubiquiti UFiber UF-WIFI Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-PRO UNIFI Bedienungsanleitung

Ubiquiti

Ubiquiti AirRouterHP Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung