Udoo Bolt Bedienungsanleitung

UDOO BOLT

Next-gen Open hardware SBC with the

AMD Ryzen Embedded V1000 Processors

BOLT

This manual is released under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) license

Every effort has been made to ensure the accuracy of this manual. However, SECO S.p.A. accepts no responsibility for any inaccuracies, errors or omissions herein.

SECO S.p.A. reserves the right to change precise specifications without prior notice to supply the best product possible.

To get the required assistance for any and possible issues, please contact us using the dedicated web form available at http://www.udoo.org/customer-

care/open.php.

Our team is ready to assist.

Revision

Date

Note

Ref

1.0

19 April 2019

First Official Release.

REVISION HISTORY

 
 BOLT 
UDOO BOLT User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by L.V. Copyright © 2019 SECO S.p.A. 

INDEX 
 INTRODUCTION.......................................................................................................................................................................... 6 
1 Warranty........................................................................................................................................................................................................................................ 7 
2 Information and assistance............................................................................................................................................................................................................. 8 
3 RMA number request..................................................................................................................................................................................................................... 8 
4 Safety............................................................................................................................................................................................................................................9 
5 Electrostatic discharges ................................................................................................................................................................................................................. 9 
6 RoHS compliance.......................................................................................................................................................................................................................... 9 
7 FCC certification ..........................................................................................................................................................................................................................10 
8 ISED certification..........................................................................................................................................................................................................................11 
9 Terminology and definitions ..........................................................................................................................................................................................................12 
10 Reference specifications ..............................................................................................................................................................................................................14 
 OVERVIEW ............................................................................................................................................................................... 15
1 Introduction..................................................................................................................................................................................................................................16 
2 Technical specifications ...............................................................................................................................................................................................................17 
3 Electrical specifications ................................................................................................................................................................................................................18 
3.1 RTC Battery ................................................................................................................................................................................................................................................18 
3.2 Power consumption.....................................................................................................................................................................................................................................19 
3.3 Power rails naming convention .....................................................................................................................................................................................................................20 
4 Mechanical specifications............................................................................................................................................................................................................. 21 
5 Block diagram..............................................................................................................................................................................................................................22 
 CONNECTORS......................................................................................................................................................................... 23 
1 Introduction..................................................................................................................................................................................................................................24 
2 Connectors overview ...................................................................................................................................................................................................................25 
3 Connectors description................................................................................................................................................................................................................ 26 
3.1 Ethernet connector......................................................................................................................................................................................................................................26 
3.2 USB ports...................................................................................................................................................................................................................................................27 
3.3 HDMI connectors ........................................................................................................................................................................................................................................30 
3.4 Audio interfaces...........................................................................................................................................................................................................................................32 
3.5 Buttons / LED header ..................................................................................................................................................................................................................................33 
3.6 SATA connectors ........................................................................................................................................................................................................................................34 
3.7 M.2 SATA/PCI-e Slot: Socket 2 Key B type 2242/2260 ................................................................................................................................................................................35 
3.8 M.2 Connectivity Slot: Socket 1 Key E Type 2230.........................................................................................................................................................................................36 
3.9 M.2 NVMe Slot: Socket 3 Key M Type 2280.................................................................................................................................................................................................38 

 
 BOLT 
UDOO BOLT User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by L.V. Copyright © 2019 SECO S.p.A. 

3.10 FAN connector............................................................................................................................................................................................................................................39 
3.11 ARDUINO interface....................................................................................................................................................................................................................................40 
3.12 GROVE connectors.....................................................................................................................................................................................................................................41 
3.13 Embedded Controller I/O Header .................................................................................................................................................................................................................42 
3.14 IR Receiver..................................................................................................................................................................................................................................................44 
3.15 UEFI BIOS Default Restore switch.................................................................................................................................................................................................................44 
 UEFI BIOS SETUP..................................................................................................................................................................... 45
1 Aptio setup Utility .........................................................................................................................................................................................................................46 
2 Main menu ..................................................................................................................................................................................................................................47 
2.1 System Time / System Date.........................................................................................................................................................................................................................47 
3 Advanced menu ..........................................................................................................................................................................................................................48 
3.1 AMD CBS submenu....................................................................................................................................................................................................................................49 
3.2 AMD PBS submenu ....................................................................................................................................................................................................................................52 
3.3 RAM Disk Configuration submenu ................................................................................................................................................................................................................52 
3.4 Battery Failure Manager submenu.................................................................................................................................................................................................................53 
3.5 Trusted computing submenu........................................................................................................................................................................................................................53 
3.6 ACPI Settings..............................................................................................................................................................................................................................................54 
3.7 SATA presence submenu............................................................................................................................................................................................................................54 
3.8 DXIO Settings submenu...............................................................................................................................................................................................................................54 
3.9 S5 RTC Wake Settings submenu.................................................................................................................................................................................................................56 
3.10 CPU configuration submenu.........................................................................................................................................................................................................................57 
3.11 AMI graphic Output Protocol Policy submenu................................................................................................................................................................................................57 
3.12 PCI Subsystem Settings submenu ...............................................................................................................................................................................................................57 
3.13 Network Stack configuration submenu..........................................................................................................................................................................................................58 
3.14 CSM configuration submenu........................................................................................................................................................................................................................59 
3.15 NVMe configuration submenu ......................................................................................................................................................................................................................59 
3.16 SDIO configuration submenu........................................................................................................................................................................................................................60 
3.17 USB configuration submenu.........................................................................................................................................................................................................................60 
3.18 Main Thermal Configuration submenu...........................................................................................................................................................................................................61 
3.19 SMBIOS Information ....................................................................................................................................................................................................................................61 
3.20 Embedded Controller...................................................................................................................................................................................................................................61 
3.21 USB-C Port Controller..................................................................................................................................................................................................................................61 
4 Chipset menu.............................................................................................................................................................................................................................. 62 
4.1 South Bridge Configuration submenu............................................................................................................................................................................................................62 
4.2 North Bridge Configuration submenu............................................................................................................................................................................................................62 
5 Security menu..............................................................................................................................................................................................................................64 
5.1 Secure Boot submenu.................................................................................................................................................................................................................................64 

BOLT

4.6 Boot menu ..................................................................................................................................................................................................................................66

4.7 Save & Exit menu.........................................................................................................................................................................................................................67

APPENDICES............................................................................................................................................................................ 68

5.1 Accessories.................................................................................................................................................................................................................................69

5.1.1 M.2 Dual network modules ..........................................................................................................................................................................................................................69

5.1.2 I/O Expansion board....................................................................................................................................................................................................................................69

BOLT

•Warranty

•Information and assistance

•RMA number request

•Safety

•Electrostatic discharges

•RoHS compliance

•Terminology and definitions

•Reference specifications

BOLT

1.1 Warranty

This product is subject to the Italian Law Decree 24/2002, acting European Directive 1999/44/CE on matters of sale and warranties to consumers.

The warranty on this product lasts for 2 years.

Under the warranty period, the Supplier guarantees the buyer assistance and service for repairing, replacing or credit of the item, at the Supplier’s own discretion.

Items cannot be returned unless previously authorized by the supplier.

The authorization is released after completing the specific form available on the web-site http://www.udoo.org/customer-care/ (Open a New Ticket →Return

Merchandise Application). The RMA authorization number must be put both on the packaging and on the documents shipped with the items, which must include all

the accessories in their original packaging, with no signs of damage to, or tampering with, any returned item.

The error analysis form identifying the fault type must be completed by the customer and has must accompany the returned item.

Following a technical analysis, the supplier will verify if all the requirements, for which a warranty service applies, are met. If the warranty cannot be applied, the

Supplier will calculate the minimum cost of this initial analysis on the item and the repair costs. Costs for replaced components will be calculated separately.

Warning!

All changes or modifications to the equipment not explicitly approved by SECO S.p.A. could impair the equipment’s functionalities and could

void the warranty

BOLT

1.2 Information and assistance

What do I have to do if I’m experiencing problems with my product?

The following services are available:

•UDOO website: visit http://www.udoo.org to receive the latest information on the product. In most cases it is possible to find useful information to solve the

problem.

•UDOO Forum: join to the community of UDOO users. In the forum, available at http://www.udoo.org/forum/, it is possible to search the multiple topics of the

community, and look for other users that had the same kind of problem - and how they solved it. It is also possible to post new topics to ask for specific

help.

•Repair centre: it is possible to send the faulty product to the SECO Repair Centre. In this case, follow this procedure:

oReturned items must be accompanied by a RMA Number. Items sent without the RMA number will be not accepted.

oReturned items must be shipped in an appropriate package. SECO is not responsible for damages caused by accidental drop, improper usage, or

customer neglect.

Note: Please have the following information before asking for technical assistance:

•Name and serial number of the product;

•Description of Customer’s peripheral connections;

•Description of Customer’s software (operating system, version, application software, etc.);

•A complete description of the problem;

•The exact words of every kind of error message encountered.

1.3 RMA number request

To request a RMA number, please visit UDOO web-site. On the bottom of the page, please select “Customer Care”, click on the “Open a New ticket”button and.

A RMA Number will be sent within 1 working day (only for on-line RMA requests).

BOLT

1.4 Safety

The UDOO BOLT board uses only extremely-low voltages.

While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.

CE and FCC certification retained using only the UDOO BOLT qualified Power Supply Unit (19V Brick Power Adapter). When not using UDOO BOLT qualified Power

Supply, use 19VDC (min 60W power) PSUs certified for your country (make sure that the power cable is less than 3 mt. long).

1.5 Electrostatic discharges

The UDOO BOLT board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all

the devices and/or components on-board.

1.6 RoHS compliance

The UDOO BOLT board is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant.

This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered.

This product should be elevated on a stable, flat, electrically non-conductive surface whilst in operation, and clear from any object that can

induce a short-circuit.

Do not expose it to water, moisture or heat from any source; UDOO BOLT is designed for reliable operation at normal ambient room

temperatures.

Avoid handling the warm and moving parts (like the fan) and generally the printed circuit board while it is powered

Only handle by the edges to minimise the risk of electrostatic discharge damage.

Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors. Also use a grounded

wrist strap or touch a safely grounded object before you handle components.

BOLT

1.7 FCC certification

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may causeharmful interference toradio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this

device and all nearby persons.

FCC certification retained using only the UDOO BOLT qualified Power Supply Unit (19V Brick Power Adapter). When not using UDOO BOLT qualified Power Supply,