ULALOV ZT-BK10 Bedienungsanleitung
Model: ZT-BK10
Please read this user manual carefully and keep it for future reference.
Should you encounter any problem, please contact us by the following
e-mail.[email protected]
Product Parameters
Part Names
Product Name
Model
Capacity
Power
Voltage
Net Weight
Electric Kettle
ZT-BK10
0.9L
1200W
120V
1.82lb
Lid
Handle
Switch Off/On
Plug
Power Base
Spout
Kettle
-1-
Quick Start
Step 1: Add clear water to the pot.
Step 2. Put the lid on the pot and place the pot on the power base.
Pay attention to good contact.please do not exceed the maximum
water level.
-2-
Step 3. Plug to the power and press the power button. The
indicator lights up and the kettle start to heat.
Step 4. After water boils, the kettle stops heating and turn off
automatically. Pour water and drink after a while.
-3-
Why The Kettle “Leaks” Water?
Steam Tube
1.Steam Tube: After the water reaches the boiling point, a lot of
steam produced in the kettle gets into the stainless steel tube and
heats the temperature controller to switch off the kettle automatically.
2.If the water exceeded the max line, it is possible for the boiling
water to jump into the steam tube, which explains why it “leaks”
from the bottom. It is not recommended to add the water exceeding
the max line.
-4-
0.9 L
3.Avoid holding the kettle leaning towards to the handle as the water
may flow into the steam tube and cause the “leakage”. The kettle
body is made of one solid piece and it shall not leak while holing
water. Please use the kettle according the instructions above.
Please do not dispose of this product as general garbage.
Users should dispose of this product separately from
other household garbage after the end of its useful life.
Separate collection and treatment will help conserve
natural resources and reduce environmental pollution.
Please follow the disposal method of electrical products
in your area.
Do not immerse the kettle into water.
Caution
-5-
Waterless Auto Shut-Off Protection
Cleaning:
1. When the kettle is heated in a water-free state, the product's double
dry-burning protection function will automatically stop heating to
prevent damage to the water cover.
Note: Please make sure the power plug is unplugged before
cleaning!
1. Please make sure that the power plug is unplugged before cleaning,
and do it after the kettle cools down.
2. Clean regularly the sediment to extend service life of the kettle.
3. Repeat the scale removal operation if scale is serious .
5. Do not clean with steel ball and any chemical or abrasive powder
cleaner.
4. If not used for a long time, please unplug the power plug from the
socket and protect it from moisture, dust and insects.
2. When the above situation occurs, please pull out the power plug
from the socket, and the electric kettle can only be used normally
after it is naturally cold (about 10 minutes). Please do not use cold
water directly to cool it, so as not to reduce the service life.
-6-
12
34
56
Unplug the power.
Pour out the vinegar and
wipe off any remaining
sediment with a damp cloth.
Clean the outside of the
pot with a dry cloth.
Put it in a dry and ventilated
place, and protect it from
dust, moisture and insects.
Boil water and then pour out
the hot water and rinse with
water 4-5 times.
Pour in 0.5L vinegar and
soak for over 1 hour.
-7-
Prohibited Content
1. Do not intrude the electric kettle, power cord, power plug or
power base into water or other liquid to avoid danger.
2. When operating, please use the safety handle. Do not touch the
hot pot body or the hot steam spilling from the spout and the
kettle. When boiling water, cover the kettle. Do not open the lid
during boiling to avoid scalding.
3. During maintenance, other epitaxial power lines shall not be used
and spare parts other than those designated by the company shall
not be used.
5. Do not hang the power cord on the table or touch objects with
high temperature. If the electric kettle is not in use for a long
time, please store the power cord in the cable slot of the power
base.
6. Do not insert pins, wire or other objects into any gap or opening
of the electric kettle or the base to avoid electric shock damage.
4. In case of any damage to the electric kettle, please send the
product to the special service center for overhaul before use.
The user must not repair by yourself.
Note: Please do not disassemble the kettle tail cover or the
power base.
-8-
！May Result in Death or Injury
1. Do not use this product unattended.
2. Please sure to turn off the power switch before removing
the base of the kettle
3. The table which place the kettle should be cleaned
regularly to remove oil stains.
4. The best distance between the product and other kitchen
appliances should be more than 30cm.
-9-
Inhaltsverzeichnis
Andere ULALOV Wasserkocher Handbücher
