UltraBrite ZEN Series Bedienungsanleitung

User Manual

Model# UDL1056-WHT

SAVE THESE INSTRUCTIONS

For Customer Care, product operation

information or problem resolution,

Call toll-free 1-877-654-1991.

Wireless Charging

5 Levels of Brightness

Dimmer Function

3 Light Modes

Warm/Natural/Bright

Touch Control

ZEN SERIES LED LAMP

with Wireless Charging & Date/Time Display

LCD Date/Time

UltraBrite®Long Lasting

LEDs (Up to 35,000 hours)

5 Levels of Brightness

Dimmer Function

Foldable Lamp

Head & Neck

LCD Date and Time Panel

Household Floor-Standing or

Table-Top Lamp

Charging Status

LED Indicator

(located near power

adapter port)

3 Light Modes

Warm/Natural/Bright

Wireless Charging

(1.0 Amp, 5V)

Power On/Off

Light Setting Auto Memory

(Maintains previous brightness

and light mode setting)

Base Metal Construction. The

weighted base will ensure

stability on ﬂoors.

Elevate your lifestyle!

UltraBrite ZEN Series LED Desk Lamp

with Wireless Charging& Date/Time Display

User Manual

SAVE THESE INSTRUCTIONS

For Customer Care, production operation information or problem resolution,

call toll-free 1-877-654-1991.

IMPORTANT SAFETY INSTRUCTION

WARNING - DO NOT EXPOSE THE ADAPTOR TO RAIN OR MOISTURE TO

REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.

WARNING!: USE THIS PRODUCT ONLY ON A FIRM, LEVEL SURFACE AND

PREVENT ANY OBJECTS OR MATERIALS FROM COVERING THE LIGHT SOURCE

AND/OR VENTILATION HOLES OF THE PRODUCT. PLEASE READ THE

INSTRUCTIONS BEFORE OPERATING THIS PRODUCT.

- LED module is not replaceable.

- Do not break or pull out LED bulbs.

- Indoor use only.

- Do not look directly at the light.

- LED module lamp head may get hot after several hours of continuous use,

AVOID placing your hands directly on LED light panel.

- Keep lamp away from materials that may burn.

- If the power cord or adaptor is damaged, replace the power supply cord

and adapter. Call Customer Care for assistance.

Operation Instructions:

1. Use this product only on a ﬁrm, level surface and prevent any objects or

materials from covering the light source and/or ventilation holes of the

product.

2. Connect the AC adapter input into the connector in the rear of the lamp.

Plug the AC adapter into a standard household 120V AC outlet. Note: Use

only with the supplied AC adapter to avoid damage or ﬁre.

3. Touch On/Off to turn on the lamp.

4. Touch control button to adjust brightness.

5. Touch to switch between 3 light temperature modes: Warm, Natural,

Bright light.

6. Touch On/Off to turn off.

LCD Date and Time Setting Instructions:

NOTE: Control Panel to set Date and Time is located near the front

bottom area of lamp body. Pull panel down to access buttons.

1. Push button 1 to adjust three level panel brightness.

2. To set time, push button 2 and the “hour” will ﬂicker, then push

button 3 (Up) or button 4 (Down) to adjust “hour.” After “hour” setting,

touch button 2 again to set the “minute,” “year,” “month” and “day.”

• In Setting mode, touch button 2 until icker stops to exit function or

operation will stop in one minute.

• When not in Setting mode, touch button 3 (Up) to switch between “12h”

and “24h” display.

Wireless Charging Speciﬁcations:

Output: 1.0Amp, 5 Volt.

Place the Qi compatible device over the wireless charging icon ( ).

When the device begins charging, the device will indicate that charging is

active. This feature will not charge all Qi compatible devices. Please refer to

your device instructions for enabled capability. Device case or cover should

be removed to ensure a stable connection.

Charging Status LED Indicator (located near power adapter port)

Without light - Wireless charging is on standby.

With light - Wireless charging is active. Device will indicate charging is active.

Fast ﬂashing - Abnormal operation. Recheck device position, remove cover,

or check Qi compatibility with your device.

The ‘Qi’ symbol is a trademark of the Wireless Power Consortium.

Replace Date/Time battery with

CR2032 3V Lithium Battery

Elevate your lifestyle!

Speciﬁcations:

Light Bulbs: 56 LEDs

Brightness Levels: 5 Levels of Brightness

Light Temperature Modes: 3 Modes (Warm/Natural/Bright Light)

LED Life: 35,000 hours

Wireless Charging pad: 1.0A (5V)

Light Output (Lumens): 700LM

Color Rendering Index (CRI): 80 Ra

Correlated Color Temperature (CCT): Cold (5000K-6500K), Warm (2700K-3000K),

Neutral (3000K-4500K)

Power Supply: 10W Adapter Included

Input Voltage: 100-240V 50/60Hz 0.6A

Output Voltage: DC 12V 1.5A

Product Size: 6.9”L x 6.9”W x 30.7”H (176 x 176 X 780mm)

Maintenance Instructions:

1. Read the instruction manual carefully before assembly or use

in case of any risk.

2. Do not switch the light On/Off repeatedly in a short time to protect

the lifetime of the LED.

3. LED module is not replaceable. Do not break or pull out LED bulbs.

4. Do not look directly at the light.

5. Keep lamp away from material that may burn.

6. Use a dry cloth for daily cleaning.

7. For product operation information or a problem resolution,

call toll-free 1-877-654-1991.

Lamp FCC Instructions:

NOTE: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experience radio/TV technician for help.

Lamp transformer FCC instructions: