Ultre 5400 Bedienungsanleitung

Ultre 5400 User Manual

ULTRE

a division in the Heidelberg group

This document was created with FrameMaker 4.0.4

Edition October 1996

Linotype and Linotronic are registered trademarks of Linotype-Hell AG.

Ultre, a division in the Heidelberg group

No part of this book may be reproduced without prior written permission.

Important notice!

We are dedicated to improving and enhancing the hardware and software

of our typesetting and communication systems and equipment. Conse-

quently, the information in this manual is subject to change without

notice. Reference is made to this fact during training courses.

The contents of this documentation are correct at the time of going to

press.

The information contained in this manual about performance and speed

as well as technical data concerning application of our products is not

legally binding as it does not constitute a written contract of features.

We point out that companies, trademarks and product names mentioned

in this manual fall within the regulations regarding protection of trade-

marks and patents.

Other product names and brands not expressly mentioned in this manual

are trademarks or registered trademarks of the corresponding manufactur-

ers.

This document was created with FrameMaker 4.0.4

Ultre 5400 - User Manual I

Table of Contents

5400 Notes on this Documentation . . . . . . . . . . . . . . . . . . . .I

1 Notes on Technical Safety 1-1

Correct Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

Cleaning the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4

Radio Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-8

2 Introduction 2-1

Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

3 Control Panel 3-1

Push Button Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6

LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-9

Machine Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10

4 Loading 4-1

Preparing the Bulk Load Supply Cassette . . . . . . . . . . . . .4-2

Loading Photo Material. . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8

Using Paper Photo Materials . . . . . . . . . . . . . . . . . . . . . .4-18

5 Changing Default Settings 5-1

Menus and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3

Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4

LCD Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5

Set Power On Resolution. . . . . . . . . . . . . . . . . . . . . . . . . .5-6

Before You Start

This document was created with FrameMaker 4.0.4

II Edition October 1996

Table of Contents

Set Laser Power Multiplier (LPM). . . . . . . . . . . . . . . . . . . .5-7

Set Laser Power Range (LPR). . . . . . . . . . . . . . . . . . . . . .5-7

Set Film Advance Length. . . . . . . . . . . . . . . . . . . . . . . . . .5-8

Buffer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9

Program Revision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 5-9

Reverse Feed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10

Punch Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

Auto Punch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

Auto Advance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

Auto FA Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

Print Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-13

6 Messages 6-1

LCD Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2

Error Messages and Corrective Procedures . . . . . . . . . . .6-4

Control Program Upgrade Procedures. . . . . . . . . . . . . . .6-10

7 Technical Data 7-1

Ultre 5400 - User Manual I

This manual (Ultre Part Number 5400.OM) covers the operation of the image-

setter.

Ultre 5400

The words film, photo material, and material are used interchangeably through-

out this manual. Unless otherwise indicated, these words refer to any photo

material that is suitable for use in the Ultre 5400 imagesetters.

■

Notes on this Documentation

This documentation contains:

●

Notes on Technical Safety

●

Introduction (with Installation)

●

Control Panel

Description of control panel (push button controls and LCD display) and

machine operation

●

Loading Photographic Material

(including preparing the bulk load supply cassette)

●

Change Default Settings

●

Messages

Status and error messages including corrective procedures

●

Technical Data

This document was created with FrameMaker 4.0.4

II Edition October 1996

Notes on this Documentation

■

Symbols in this Documentation

The text contains information which must be observed in order

to protect the

user from danger!

This information must be observed to protect the equipment, the software and

the data from being damaged!

The text contains general or additional information about a certain subject.

Ultre 5400- User Manual 1-1

Notes onTechnical Safety

Correct Use

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

General Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Cleaning the Unit

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Laser Safety

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Standards and Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Position of Laser Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Radio Interference

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Notes for Users in the US . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Notes for Users in Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Safety Standards

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Mechanical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

General Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Approvals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

This document was created with FrameMaker 4.0.4

1-2 Edition October 1996

The equipment meets the standard safety regulations for information technol-

ogy equipment including electrical office equipment.

■

Correct Use

The Ultre 5400 is a laser imagesetter for photographic material and is only to

be used for this purpose in accordance with the user documentation.

Do not place any objects or liquids on the unit. Ventilation outlets must be kept

clear at all times.

■

General Information

Pay attention to the notes on ambient conditions in Chapter 7,

Technical Data

and to the conditions for installing the unit in Chapter 2,

Introduction

, section

Installation

Unit connectors and sockets must be easily accessible. This is to ensure easy

removal of the power cord from the wall socket in the event of an emergency.

The unit does not contain any parts which require servicing by the operator.

Ultre 5400- User Manual 1-3

Notes on Technical Safety - 1

ATTENTION: Unauthorized opening of the cabinet or improper repairs can

expose the operator to great danger. Service work may only be performed by

authorized personnel specialized in this field. The appropriate regulations for

the prevention of accidents are to be adhered to when the equipment is

serviced.

Failure to observe the safety regulations may result in the loss of accident

insurance!

■

Cleaning the Unit

The unit must be disconnected from the power supply by pulling out the mains

plug if cleaning the unit involves using liquids.

The unit surfaces can be cleaned using a dry cloth.

If the unit is very dirty, it may be cleaned with a damp cloth which has been

dipped in a mild water soluable detergent and well drained. Make sure that no

liquid gets inside the unit and keep moisture away from the connection sockets

at the rear of the unit.

Never use abrasive cleansers or solvents!

1-4 Edition October 1996

1 - Notes on Technical Safety

■

Laser Safety

■

Standards and Regulations

The Ultre 5400 Laser Imagesetter is certified as a Class 1 laser product under

the U.S. Department of Health and Human Services (DHHS) Radiation

Performance Standard according to the Radiation Control for Health and

Safety Act of 1968. As such, this unit complies with 21 CFR Chapter 1, Sub-

chapter J.

In addition, this product meets the requirements of EN60825

This means that this laser imagesetter does not emit hazardous laser radiation.

Since radiation emitted inside the laser imagesetter is completely confined

within protective housings and external covers, the laser beam cannot escape

from the machine during any phase of user operation or maintenance.

■

Service

None of the parts within the protective housing require servicing by the user.

Any servicing must be done only by factory-trained service technicians

authorized by Ultre Division in the Heidelberg group.

Inhaltsverzeichnis

Andere Ultre Drucker Handbücher

Ultre

Ultre 3000 Imagesetter Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung