Uniden ANA9620 Bedienungsanleitung

CONTENTS

Introduction......................................1

Welcome......................................1

Features.......................................1

IncludedInYourPackage.........................2

SettingUpAndAdjustingYourPhone..................3

 Selecting The Location ...........................3

 Connecting The Telephone Line ....................3

 Connecting The Telephone Cords ...................4

PowerToTheBase&ChargerUnits.................5

WallInstallation................................6

AttachingTheBeltClip...........................9

InstallingTheBattery...........................10

ChargingTheBattery...........................10

ChargingSecondBattery.........................11

LowBatteryIndicator...........................11

CleaningBattery&ChargingUnitContacts..........12

HandsetUse.....................................13

 ANA9620 Handset Controls .......................13

UsingTheHandset.............................14

AnsweringACall...............................15

MakingACall.................................15

ProgrammingFunctions...........................16

PBXOrPSTN..................................16

ProgramModeSetup............................16

ProgrammingXFERInPBX ......................17

ProgrammingCONFInPBX......................18

UsingTheFeatureButtons.......................19

PBXFeatures..................................19

PSTNFeatures.................................22

Accessories......................................24

OptionalHeadSet..............................24

OptionalBackupAdapter........................24

OtherAccessories&Parts........................25

Troubleshooting..................................26

Specifications....................................27

CONTENTS

Uniden®is a registered trademark of Uniden America Corporation.

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:36:03 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

all-guides.com

Introduction

WELCOME

Congratulations on your purchase of the Uniden

ANA9620

Cordless Telephone. The

ANA9620

is designed and

engineered to exacting standards for reliability, long life, and

outstanding performance. To get the most from your

ANA9620

, please read this Owners Manual thoroughly. To

familiarize you with the features of your cordless phone,

refer to the handset and base illustration foldout from the

rear cover.

FEATURES

•

Super Long Range 900 MHz Digital

•

2-line, 16-digit LCD Display

•

PBX or PSTN Operating Mode

•

Single button access to: CONFERENCE, HOLD, TRANSFER,

PAUSE, FLASH/REDIAL, and MUTE features

•

Redial Capability up to the last 3 numbers dialed

•

AutoStandby

•

Any Key Answer

•

AutoTalk

•

Auto Line Select

•

Silent Alert

•

Ringer and Handset Volume Controls

•

Four Ringer Tones

•

Out of Range Protection

•

Low Battery Protection System

PSTN or PBX

The

ANA9620

is designed to work on a standard telephone

line (PSTN) or an analog PBX port (PBX).

TO YOUR NEW PHONE

INTRODUCTION

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:34:56 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

INCLUDED IN YOUR PACKAGE

•

This Owners Manual

•

Precautions and Important Safety Instructions

If your

ANA9620

is not performing to your expectations,

try the steps listed in the Troubleshooting Section of this

Guide. If you are still unable to resolve the problem, contact

yourPBXAdministratorortheUnidenTechnicalSupport

Department.

Belt Clip Wall Plate Adapter

TIP

To get the most from your

phone, please read this

owners manual

thoroughly.

WARNING

If any of these items are

missing or damaged,

contact your PBX

Administrator or the

Uniden Parts Department at

(800)554-3988, 8:00 a.m. to

5:00 p.m. Central, Monday

through Friday, or contact

us on the web at

www.uniden.com.

Telephone Cords Charging Unit with

AC adapter AD960

Base with

AC adapter AD9500

talk

F2 F3 F4

xfer conf hold

wxyz

abc

pqrs

mno

jkl

tuv

oper

ghi

def

mute

chan vol

lock msg

bat low

Handset 2 Rechargeable

Batteries

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:35:01 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

Setting Up and Adjusting Your Phone

SELECTING THE LOCATION

Select a location for the

ANA9620

to avoid excessive heat or

humidity. The base of your

ANA9620

can be placed on a

desk or tabletop near a standard 120V AC outlet and

telephone line jack. The base can also be mounted on a

standard

AT&T or GTE wall plate using the included wall

mount adapter. Keep the base and handset away from

sources of electrical noise (motors, fluorescent lighting,

computers).

CONNECTING THE TELEPHONE LINE

There are three types of phone outlets:

▼

1) Modular Jack

Plug the telephone line cord from the base into a standard

modular telephone jack(s). (

Note

:Ifyoudonothavea

modular jack, contact your local telephone company for

information on the installation of these jacks.)

▼

2) 4-Prong Jack

An adapter (not included) is required. The adapter plugs into

the 4-prong jack and the telephone line cord plugs into the

adapter.

▼

3) Hard-wired Jack

A modular jack converter (not included) is required. You

may need to rewire when connecting the converter (making

color-coded connections).

Your Uniden telephone dealer or a telephone supply

store can advise you on the proper adapter or converter.

AND ADJUSTING YOUR PHONE

SETTING UP

TIP

Before choosing a location

foryourphone,readthe

Installation

Considerations included in

the Precautions and

Important Safety

Instructions brochure.

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:35:02 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

CONNECTING THE TELEPHONE CORDS

The

ANA9620

must be connected to a PSTN or an analog

PBX port telephone line.

CAUTION:

•

Never install telephone wiring during a lightning storm.

•

Never touch uninsulated telephone wires or terminals

unless the telephone line has been disconnected at the

network interface.

•

Use caution when installing or modifying telephone lines.

▼

Single Cord, 2-Line Combined Telephone

Cord Installation

▼

Two cord, Two-Line Telephone Cord Installation

TIP

To setup PSTN or PBX,

refer to page 16.

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:35:04 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

POWER TO THE BASE & CHARGER UNITS

Theuniquedesignofyour

ANA9620

allows you to place

the handset in the charging unit with or without the belt clip

attached. The charging unit also has the ability to charge a

second battery with or without the handset being charged.

The battery can be recharged either in or out of the handset.

IMPORTANT

Route the power cord

where it will not create a

trip hazard, or where it

could become chafed and

create a fire or other

electrical hazards.

SETTING UP

Use only the Uniden

AC adapter AD9500

supplied with this base.

Use only the Uniden

AC adapter AD960 supplied

with this charging unit.

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:35:09 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

all-guides.com

WALL INSTALLATION

▼

Standard Wall Plate Mounting

These phones are designed to be

mounted on a standard AT&T or GTE

wall plate. To attach the wall mount

stand to the base:

1. Slide the wall mount stand into the

notches at the top of the base,

rotate the wall mount stand down

and snap it into place.

2. Plug the AC adapter into the base as previously described.

3. Place the AC adapter cord inside the molded channel

of the wall mount stand.

4. Plug one end of the short telephone cord into the

LINE

(s)

jack on the base. Then place the telephone cord(s) inside the

molded channel(s) on the bottom of the wall mount stand.

5. Plug the other end of the

short telephone cord into

the modular wall jack.

6. Place the base on the posts of the

wall plate and push down until it is

firmly seated.

7. Plug the AC adapter into a standard 120V AC wall outlet.

NOTE:DONOTusean

outlet controlled by a wall

switch.

Use only the Uniden

AC adapter AD9500

supplied with this base.

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:35:13 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

▼

Direct Wall Mounting

If you do not have a standard wall plate, you can mount your

phone directly on a wall. Before mounting your phone,

consider the following:

•

Select a location away from electrical cables, pipes, or

other items behind the mounting location that

could cause a hazard when inserting screws

into the wall.

•

Make sure the wall material is capable of

supporting the weight of the base.

•

Use #10 screws with anchoring devices suitable

for the wall material where the base will

be placed.

1. Insert two mounting screws 31516 inches apart.

Allow about 316 of an inch between the wall

and screw heads for mounting the phone.

2. Plug and secure the AC adapter cord by following steps 2 and

3ofthe

Standard Wall Plate Mounting

3. Plug one end of the telephone line

cord into the

LINE

(s) jack on the

base. Then place the telephone

cord(s) inside the molded

channel(s) on the bottom of the

wall mount stand.

4. Place the base on the posts of

thewallscrewsandpushdown

untilitisfirmlyseated.

5. Plug the other end of the short telephone cord into a

telephone wall jack.

6. Plug the AC adapter into a standard 120V AC wall outlet by

following step 7 of the

Standard Wall Plate Mounting

SETTING UP

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:35:16 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

▼

Charging Unit Wall Mounting

The charging unit is also designed to be wall mounted.

Before mounting your charging unit, consider the following:

•

Select a location away from electrical cables, pipes, or

other items behind the mounting location that could cause

a hazard when inserting screws into the wall.

•

Make sure the wall material is capable of supporting the

weight of the charging unit.

•

Use #10 screws with anchoring devices suitable for the

wall material where the charging unit will be placed.

1. Insert two mounting screws 1-1/2

inches apart. Allow about 316 of an

inch between the wall and screw

heads for mounting the phone.

2. Plug the AC adapter into the

charging unit as previously

described. Wrap the AC adapter cord

around

the strain relief.

3. Place the charging unit on

the posts of the wall

screws and push

down until it is

firmly seated.

4. Plug the AC adapter into a standard 120V AC wall outlet.

1 1/2"

3/16"

Strain

Relief

1 1/2"

3/16"

Use only the Uniden

AC adapter AD9500

supplied with this base.

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:35:18 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

ATTACHING THE BELT CLIP

You can use the belt clip to attach the handset to your belt or

pocket for convenient portability.

1. Snap the tab out of the belt clip

notch on the top of the handset.

2. Slide the clip into the tab slot.

3. Press firmly until it snaps into

place.

4. To remove, press the retaining clip

in toward the belt clip blade and

slide the clip up at the same time.

Once the belt clip is removed

remember to re-install the cover tab.

SETTING UP

C:\ana9620-1\ANA9620-1.vp

Fri Jul 31 12:35:23 1998

Color profile: Disabled

Composite Default screen

All manuals and user guides at all-guides.com

Andere Handbücher für ANA9620

Inhaltsverzeichnis

Andere Uniden Schnurloses Telefon Handbücher

Uniden

Uniden TRU9585 - TRU 9585 Cordless Phone Bedienungsanleitung

Uniden

Uniden EXP 4240 Series Bedienungsanleitung

Uniden

Uniden WDECT3315 Bedienungsanleitung

Uniden

Uniden EXLI 8962 Bedienungsanleitung

Uniden

Uniden EXAI 3248 Series Bedienungsanleitung

Uniden

Uniden EXP 7900 Series Bedienungsanleitung

Uniden

Uniden XCA550/55 Bedienungsanleitung

Uniden

Uniden EXI8560 - EXI 8560 Cordless Phone Service-Handbuch

Uniden

Uniden DSS7815 +1 Series Bedienungsanleitung

Uniden

Uniden EXI4560 - EXI 4560 Cordless Phone Bedienungsanleitung

Uniden

Uniden DXI8560 Series Bedienungsanleitung

Uniden

Uniden TRU348 Bedienungsanleitung

Uniden

Uniden DSS2115 Bedienungsanleitung

Uniden

Uniden EXT 1865 Montageanleitung

Uniden

Uniden 6035 + 1 Bedienungsanleitung

Uniden

Uniden EXT3165 Bedienungsanleitung

Uniden

Uniden XCI-600 Bedienungsanleitung

Uniden

Uniden XS 1410 Bedienungsanleitung

Uniden

Uniden EXa15580 Series Bedienungsanleitung

Uniden

Uniden EXAI398 Series Bedienungsanleitung

Uniden

Uniden DECT2060-2 - DECT Cordless Phone Service-Handbuch

Uniden

Uniden DXAI4288-2 Bedienungsanleitung

Uniden

Uniden XDECT SSE35 Series Bedienungsanleitung

Uniden

Uniden XS915 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung