Uniden DXAI 5188-2 Series Bedienungsanleitung

[ 3 ]www.uniden.com

Contents

Welcome/Features 4

Controls and Functions 5

Getting Started

Installing the Phone 7

Mounting the Main Base Unit on a Wall 12

When to Re-register Handsets 15

Call Transfer Feature 15

Setting Menu Display Options 16

Basics

Making and Receiving Calls 19

Adjusting the Handset Ringer and

Earpiece Volume 20

Tone Dialing Switch Over 21

Traveling Out-of-Range 21

Selecting a Different Channel 22

Find Handsets 22

Using Call Waiting 22

Memory Dialing

Storing Phone Numbers and Names in Speed Dial Memory

Steps for Entering Names and Special Characters 25

Making Calls from Speed Dial Memory 26

Chain Dialing 27

Editing a Stored Name and/or Phone Number 28

Erasing a Stored Name and Phone Number 30

RocketDial

RocketDial 31

Storing and Editing the RocketDial 31

Making Calls with the RocketDial 31

Deleting the RocketDial 32

Caller ID Features

Caller ID and CIDCW (Caller ID on Call Waiting) 33

When the Telephone Rings 33

Viewing the Caller ID Message List 34

Deleting Information from the Caller ID List 35

Making a Call from the Caller ID List 37

Storing Caller ID Messages in Memory Dialing 38

The Integrated Answering Device

The Integrated Answering Device 39

Features 39

Turning the Answering System On/Off 40

Setting Up Your Answering System 41

Using Your Answering System 49

Additional Information

Changing the Digital Security Code 56

Installing the Beltclip 56

Headset Installation 57

Note on Power Sources 57

Maintenance 57

Troubleshooting 58

General Information 63

Precautions & Warranty 64

I.C. Notice 66

Index 67

[ 4 ] www.uniden.com

Welcome Congratulations on your purchase of the Uniden dual handset cordless telephone. This

cordless phone is designed and engineered to exacting standards for reliability, long life,

and outstanding performance.

Note: Some illustrations in this manual may differ from the actual unit for

explanation purposes. The color of your cordless telephone may vary.

Be sure to visit our web site: www.uniden.com

Uniden®and RocketDial®are registered trademarks of Uniden America Corporation.

AutoTalk, AutoStandby, UltraClear Plus, Random Code and AutoSecure are trademarks of

Uniden America Corporation.

Features • 5.8 GHz Extended Range Technology

• Dual Handset System

(Extra Handset & Charger Included)

• Integrated Telephone Answering Device

(ITAD) (Trilingual Announcement Option)

• Voice Prompted ITAD Setup Menu

• 3 Line Backlit Display

• Caller ID/Caller ID on Call Waiting

• 30 Caller ID Memory Locations

• 10 Speed Dial Memory

• One-Touch RocketDial

• Call Transfer from Handset to Handset

• Find handset Locator

• Earpiece Volume Control

• Ringer Levels (High-Low-Off)

• Hearing Aid Compatible

• Desk or Wall Mountable

CONTROLS AND FUNCTIONS [ 5 ]www.uniden.com

1. Handset antenna

2. Beltclip hole

3. Jack for optional headset

4. Handset battery compartment

5. Handset earpiece

6. LCD display

7. call id (Caller ID)/menu key

8. vol/ / (volume & scroll) key

9. vol/ / (volume & scroll) key

10. /tone/ (left cursor) key

11. redial/pause key

12. select/channel key

13. Handset microphone and

ringer speaker

14. RocketDial key

15. end key

16. talk/flash key

17. #/ (right cursor) key

18. memory key

19. delete/transfer key

20. Handset charging contacts

Controls and Functions

Handsets

CONTROLS AND FUNCTIONS[ 6 ] www.uniden.com

volume

SELECT

SET

ringer find hs

MENU/CLOCK

answer on/off greeting

mic

memo

rec

charge in use

38 39

Main Base Unit

Extra Charging Cradle (for Second Handset)

21. (repeat/rewind) key

22. volume/SELECT (up) key

23. memo/rec (record) key

24. volume/SELECT (down)

key

25. answer on/off key

26. ringer key

27. Base charging contacts

28. Base antenna

29. charge/in use LED

30. (play/stop) key

31. (skip/fast forward) key

32. (delete) key

33. MENU/CLOCK key

34. greeting key

35. find hs key

36. SET key

37. mic (microphone)

38. DC IN 9V jack

39. Telephone line jack

40. Charging contacts

41. Charge LED

42. DC IN 9V jack

GETTING STARTED [ 7 ]www.uniden.com

Installing the Phone

Do the following steps:

A. Choose the best location

B. Install the rechargeable battery packs into both handsets

C. Connect the main base unit and charging cradle

A. Choose the best location

When choosing a location for your new phone, here are some important guidelines

you should consider:

•The location should be close to both a phone jack and a continuous power outlet

(one which is not connected to a switch).

•The handsets and the main base should be kept away from sources of electrical

noise such as motors, microwave ovens, and fluorescent lighting.

•The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

Avoid excessive moisture,

extremely low temperatures,

dust, mechanical vibration,

or shock

Avoid heat sources, such as radiators,

air ducts, and sunlight

Avoid television sets and other

electronic equipment

Avoid noise sources such as a window

by a street with heavy traffic

Avoid microwave ovens

Avoid personal computers

Avoid other cordless telephones

Choose a central location

GETTING STARTED

If your home has

specially wired alarm

equipment connected to

the telephone line, be

sure that installing the

system does not disable

your alarm equipment.

If you have questions

about what will disable

your alarm equipment,

contact your telephone

company or a qualified

installer.

GETTING STARTED[ 8 ] www.uniden.com

Install the rechargeable battery packs into both handsets

Both handsets are powered by a rechargeable battery packs.

The battery recharges automatically when the handset is

placed in the main base unit or charging cradle.

1) Press down on the handset battery case cover (use the

finger indention for a better grip) and slide the cover

downward to remove.

2) Plug the battery pack connector (red & black wires) into the

jack inside the battery compartment.

(The connector notches fit into the grooves of the jack only

one way.) Match the wire colors to the polarity label in the

battery compartment, connect the battery, and listen for

a click to insure connection.

3) Make sure you have a good connection by slightly pulling on

the battery wires. If the connection is secure, the battery

jack will remain in place.

• For optimum

performance use only

the Uniden BT-800

rechargeable battery

pack supplied with

your phone.

4) Place the battery case cover back on the handset by sliding

it upwards until it clicks into place.

• Replacement batteries

are also available

through the Uniden

Parts Department at

(800) 554-3988,

Monday through Friday

from 8:00 a.m. to 5:00

p.m. or online at

www.uniden.com

GETTING STARTED

GETTING STARTED [ 9 ]www.uniden.com

The last number dialed in the redial memory, the Menu display options, the names and

the numbers stored in the memory locations or CID list are retained for up to 30 minutes

while you replace the battery pack.

Low battery alert

When the battery pack is very low and needs to be charged,

the phone is programmed to eliminate functions in order to

save power. If the phone is not in use, Low Battery flashes

on the LCD and none of the keys will operate.

If the phone is in use, Low Battery flashes and the handset

beeps. Complete your call as quickly as possible and return the

handset to either cradle for charging.

• Even when the

battery pack is not

being used, it will

gradually discharge

over a long period of

time. For optimum

performance, be sure

to return the handset

to either cradle after

a telephone call.

Cleaning the battery charging contacts

To maintain a good charge, it is important to clean the

charging contacts on the handsets, main base unit and

charging cradle once a month. Using water only, dampen

a cloth to clean the charging contacts. Then make sure

to go back over the charging contacts with a dry cloth

before returning the handsets to the main base unit or

charging cradle to charge.

Do not use paint thinner, benzene, alcohol, or other chemical products.

Doing so may discolor the surface of the telephone and damage the finish.

•Talk Mode -

The handset is off either

cradle and the talk/flash

key has been pressed,

enabling a dial tone.

•Standby Mode -

The handset may be sitting

in or off either charging

cradle but is NOT in use.

The talk/flash key has not

been pressed and there is

no dial tone.

GETTING STARTED[ 10 ] www.uniden.com

Use only the supplied AD-

314 AC adapter for the

main base and AD-310 for

the charging cradle. Do

not use any other AC

adapter.

C. Connect the main base unit and charging cradle

1) Connect each AC adapter to the DC IN 9V

jack and to each standard 120V AC wall

outlet.

2) Place one handset in the main base unit

and the other in the charging cradle.

3) Make sure that the charge/in use and

charge LED illuminate. If the LED does

not illuminate, check to see that the AC

adapter is plugged in and that the

handset makes good contact with the

cradle’s charging contacts.

4) Place the handset in the main base unit and one

handset in the charging cradle for 15-20 hours without

interruption. The main base or charging cradle unit’s

LED light (labeled charge/in use or charge)

illuminates once the handset is placed in the main

base or charging cradle. The LED light will illuminate

whether the battery pack is connected or not.

Inhaltsverzeichnis

Andere Uniden Schnurloses Telefon Handbücher

Uniden

Uniden D1880 Series Bedienungsanleitung

Uniden

Uniden DECT1580 - DECT 1580 Cordless Phone Benutzerhandbuch

Uniden

Uniden TRU9466 - TRU 9466 Cordless Phone Bedienungsanleitung

Uniden

Uniden CXA 15698 Bedienungsanleitung

Uniden

Uniden DECT1480 Bedienungsanleitung

Uniden

Uniden DECT3181-2 Service-Handbuch

Uniden

Uniden EXP91 Bedienungsanleitung

Uniden

Uniden DXI 4286-2 Series Bedienungsanleitung

Uniden

Uniden EXAI8580 - EXAI 8580 Cordless Phone Bedienungsanleitung

Uniden

Uniden TRU9380 Series Bedienungsanleitung

Uniden

Uniden EXAI 8985 Bedienungsanleitung

Uniden

Uniden EXS 9980 Bedienungsanleitung

Uniden

Uniden DX3555 Bedienungsanleitung

Uniden

Uniden DG900 DGMax Bedienungsanleitung

Uniden

Uniden DECT 2130 Bedienungsanleitung

Uniden

Uniden XC610 Series Bedienungsanleitung

Uniden

Uniden XDECT R055 Bedienungsanleitung

Uniden

Uniden DG72 Bedienungsanleitung

Uniden

Uniden XDECT 7055 Bedienungsanleitung

Uniden

Uniden EXS 2080 Bedienungsanleitung

Uniden

Uniden EXT3165 Bedienungsanleitung

Uniden

Uniden TXC400 Bedienungsanleitung

Uniden

Uniden D3280 Bedienungsanleitung

Uniden

Uniden EXS 2060 Montageanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung