Uniden EXA 7250 Series Bedienungsanleitung

EXA 7250

SERIES

OWNER'S

MANUAL

[1]

www.uniden.com

Contents

Welcome/Features 2

Controls & Functions 3

Terms Used in this Manual 4

Getting Started 5

Installing the Phone 5

A. Choose the Best Location 5

B. Install the Rechargeable Battery Pack into the Handset 6

C. Connect the Base Unit and Charge the Handset 7

D. Mount the Base Unit on a Wall 8

E. Choose the Dialing Mode 9

Basics 10

Using Your Phone 10

Making and Receiving Calls 10

Adjusting the Ringer and Earpiece Volume 11

Tone Dialing Switch-over 12

Traveling Out-of-Range 12

Selecting a Different Channel 13

Find Handset 13

Using Call Waiting 13

RocketDial 14

Storing the RocketDial 14

Using the Speed Dial Memory 15

Storing Numbers in Speed Dial Memory 15

Making Calls from Speed Dial Memory 15

The Integrated Answering Device 16

Turning the Answering System On/Off 17

Setting Up Your Answering System 18

Using Your Answering System 27

Remote Operation 32

Additional Information 37

Changing the Digital Security Code 37

Note on Power Sources 38

General Information 40

Troubleshooting 41

Liquid Damage 44

Precautions & Warranty 45

I.C. Notice 47

Index 48

Remote Operation Card

Uniden EXA3245.book 1 ページ２００４年２月４日　水曜日　午後６時１８分

[2]

www.uniden.com

Congratulations on your purchase of the Uniden cordless telephone and answering system.

This phone is designed and engineered to exacting standards for reliability, long life, and

outstanding performance.

Note: Illustrations in this manual are used for explanation purposes. Some illustrations in

this manual may differ from the actual unit. The color of your cordless phone may vary.

As an Energy StarPartner, Uniden has determined that this product or product models meets the

Energy Starguidelines for energy efficiency.

Energy Staris a U.S. registered mark.

WELCOME/FEATURES/

TERMINOLOGY

Welcome

Features • 2.4GHz Extended Range Technology

• Integrated Telephone Answering Device

(ITAD)

• Trilingual Voice Prompts (English, French

or Spanish Support)

• 10 Number Memory Dialing

• One touch RocketDial®

• Last Number Redial

• Flash and Pause

• Tone/Pulse Dialing

• Find Handset Locator

• Earpiece Volume Control

•RingerVolumeControl

• Hearing Aid Compatible

• 20 Channel Autoscan

Be sure to visit our web site: www.uniden.com

Uniden® and RocketDial® are registered trademarks of Uniden America Corporation.

AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of

Uniden America Corporation.

Uniden EXA3245.book 2 ページ２００４年２月４日　水曜日　午後６時１８分

[3] CONTROLS & FUNCTIONS

www.uniden.com

Controls & Functions

Play

Skip

Stop

Delete

Repeat

CONTROLS &

FUNCTIONS

1. Handset antenna

2. Handset battery compartment

3. Handset earpiece

4. talk/batt low LED

5. remote key (pages 9 and 35)

6. vol (volume)/ key (page 11)

7. */tone key (page 12)

8. redial/pause key (pages 10 and 15)

9. memory key (page 14)

10. Rocketdial key (page 14)

11. talk/flash key (pages 10 and 13)

12. end key (pages 10 and 11)

13. channel key (page 13)

14. Handset microphone

15. Handset charging contacts

Retrieve TAD message

with Handset Remote keys

Uniden EXA3245.book 3 ページ２００４年２月４日　水曜日　午後６時１８分

CONTROLS & FUNCTIONS [4]

www.uniden.com

CONTROLS &

FUNCTIONS

16. Telephone line jack

17. DC IN 9V jack

18. Base antenna

19. Base speaker

20. (repeat/rewind) key (page 28)

21. memo rec (record) key (page 31)

22. menu/clock key (page 18 and 19)

23. ringer key (page 26)

24. Base charging contacts

25. charge in use LED

26. (play/stop) key (pages 26 and 27)

27. (skip/fast forward) key (page 29)

28. (delete) key (page 30)

29. greeting key (page 25)

30. answer on/off key (page 17)

31. set key (page 18)

32. find hs (handset) key (pages 13 and 37)

33. / /volume/select keys (page 18 and 26)

34. mic (microphone)

Terms Used in this Manual

• Standby Mode -The handset may be sitting in or off the base, but is NOT in use. The talk/flash key has

not been pressed and there is no dial tone.

• Talk Mode - The handset is off the base and the talk/flash key has been pressed, enabling a dial tone.

• RocketDial - One touch speed dial

Uniden EXA3245.book 4 ページ２００４年２月４日　水曜日　午後６時１８分

[5] GETTING STARTED

www.uniden.com

Installing the Phone

Do the following steps:

A. Choose the Best Location

B. Install the Rechargeable Battery Pack into the Handset

C. Connect the Base Unit and Charge the Handset

D. Mount the Base Unit on a Wall

E. Choose the Dialing Mode

A. Choose the Best Location

When choosing a location for your new phone, here are some important guidelines you should

consider:

• The location should be close to both a phone jack and a continuous power outlet (one

which is not connected to a switch).

• The base and handset should be kept away from sources of electrical noise such as motors,

microwave ovens, and fluorescent lighting.

• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

• There should be enough space to fully extend the antenna.

Avoid heat sources, such as radiators,

air ducts, and sunlight

Avoid television sets and other

electronic equipment

Choose a central location

Avoid noise sources such as a window by

a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture,

extremely low temperatures, dust,

mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

If your home has

specially wired alarm

equipment connected to

the telephone line, be

sure that installing the

system does not disable

your alarm equipment.

If you have questions

about what will disable

your alarm equipment,

contact your telephone

company or a qualified

installer.

note

GETTING STARTED

Uniden EXA3245.book 5 ページ２００４年２月４日　水曜日　午後６時１８分

GETTING STARTED [6]

www.uniden.com

B. Install the Rechargeable Battery Pack into the Handset

The handset is powered by a rechargeable battery pack. The

battery recharges automatically when the handset is placed in

the base unit.

1) Press down on the handset battery case cover (use the

finger indention for a better grip) and slide the cover

downward to remove.

2) Plug the battery pack connector (red & black wires) into the

jack inside the battery compartment.

(The connector notches fit into the grooves of the jack only

one way.) Match the wire colors to the polarity label in the

battery compartment, connect the battery and listen for a

click to insure connection.

3) Make sure you have a good connection by slightly pulling on

the battery wires. If the connection is secure, the battery

jack will remain in place.

4) Place the battery case cover back on the handset by sliding

it upwards until it clicks into place.

•Use only the Uniden

(BT-905)

rechargeable battery

pack supplied with

your cordless

telephone.

•Replacement batteries

are also available

through the Uniden

Parts Department at

(800) 554-3988,

Monday through Friday

from 8:00 a.m. to 5:00

p.m. or online at

www.uniden.com

GETTING STARTED

Uniden EXA3245.book 6 ページ２００４年２月４日　水曜日　午後６時１８分

[7] GETTING STARTED

www.uniden.com

•Use only the supplied

AD-314 AC adapter.

Do not use any other

AC adapter.

•Do not place the power

cord where it creates a

trip hazard or where it

could become chafed

and create a fire or

electrical hazard.

GETTING STARTED

C. Connect the Base Unit and Charge the

Handset

1) Connect the AC adapter to the DC IN 9V jack and to

a standard 120V AC wall outlet.

2) Place the handset in the base unit with the keypad

facing forward.

3) Make sure the charge in use LED illuminates.

If the LED does not illuminate, check to see that the AC adapter

is plugged in and the handset makes good contact with the base

charging contacts.

•Connect the AC adapter to a continuous power supply.

•Place the base unit close to the AC outlet so that you can

unplug the AC adapter easily.

4) Charge your handset at least 15-20 hours before plugging into

the phone line.

5) Once the handset battery pack is fully charged,

connect the telephone line cord to the TEL LINE

jack and a telephone outlet.If your telephone

outlet isn't modular, contact your telephone

company for assistance.

Uniden EXA3245.book 7 ページ２００４年２月４日　水曜日　午後６時１８分

GETTING STARTED [8]

www.uniden.com

GETTING STARTED

D. Mount the Base Unit on a Wall

Standard wall plate mounting

This phone can be mounted on any standard wall plate.

1) Locate the base unit on the wall

mount adapter as shown and slide

the wall mount adapter into the

notches on the base bottom.

2) Plug the AC adapter to the DC IN 9V

jack.

3) Route the AC adapter cord through

the molded wiring channel as shown.

4) Plug the AC adapter into a standard

120V AC wall outlet.

5) Plug the telephone line cord into the

TEL LINE jack. Route the cord

through the molded wiring channel

as shown.

6) Plug the telephone line cord into the

telephone outlet.

7) Align the mounting slots on the base

with the mounting posts on the wall.

Then push in and down until the

phone is firmly seated.

To remove, push up

a tab on the wall

mount adapter as

shown.

Uniden EXA3245.book 8 ページ２００４年２月４日　水曜日　午後６時１８分

[9] GETTING STARTED

www.uniden.com

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone

directly to the wall. Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the

mounting location that could cause a hazard when inserting

screws into the wall.

• Try to mount your phone within 5 feet of a working phone jack

to avoid excessive cord lengths.

• Make sure the wall material is capable of supporting the weight

of the base and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with

anchoring devices suitable for the wall material where the base

unit will be placed.

1) Insert two mounting screws into the wall, (with their

appropriate anchoring device), 3-15/16 inches apart. Allow

about 1/8 of an inch between the wall and screw heads for

mounting the phone.

2) Refer to steps 1 through 8 on page 8 to mount the telephone.

E. Choose the Dialing Mode

Most phone systems use tone dialing. However some phone systems (such as in rural areas)

still use pulse dialing. Your Uniden phone supports both tone and pulse dialing. The default

setting is tone dialing. If your phone system uses pulse dialing, follow the steps below to

change the dialing mode:

1) In standby mode, press and hold the remote key until you hear a confirmation tone.

2) Press the #key to set your phone for pulse dialing. You will hear a confirmation tone.

•If you are not sure of

your dialing system,

make a trial call. If the

call connects, leave

the setting as is.

Otherwise, set for

pulse dialing.

•If your phone system

requires pulse dialing

and you need to send

DTMF tones during a

call, you can

temporarily switch

over to tone dialing.

(Refer to “Tone Dialing

Switch-over” on

page 12).

note

GETTING STARTED

Uniden EXA3245.book 9 ページ２００４年２月４日　水曜日　午後６時１８分

Inhaltsverzeichnis

Andere Uniden Schnurloses Telefon Handbücher

Uniden

Uniden EXP 4240 Series Bedienungsanleitung

Uniden

Uniden D1484 series Bedienungsanleitung

Uniden

Uniden DECT 1811 Bedienungsanleitung

Uniden

Uniden DS73 Bedienungsanleitung

Uniden

Uniden DSS 2475 Bedienungsanleitung

Uniden

Uniden EXAI5680 - EXAI 5680 Cordless Phone Bedienungsanleitung

Uniden

Uniden DCT5260 Bedienungsanleitung

Uniden

Uniden DXAI4588 Series Bedienungsanleitung

Uniden

Uniden DWX207 Series Bedienungsanleitung

Uniden

Uniden EXI976C - EXI 976C Cordless Phone Bedienungsanleitung

Uniden

Uniden DS71 Bedienungsanleitung

Uniden

Uniden DECT3181 Bedienungsanleitung

Uniden

Uniden DECT2185 Bedienungsanleitung

Uniden

Uniden DECT2080 Series Bedienungsanleitung

Uniden

Uniden EXAI918 Schulungshandbuch

Uniden

Uniden EXP920 Bedienungsanleitung

Uniden

Uniden EXS 2060 Bedienungsanleitung

Uniden

Uniden DECT180 Service-Handbuch

Uniden

Uniden DRX402 Bedienungsanleitung

Uniden

Uniden DXI8560-2 - DXI Cordless Phone Service-Handbuch

Uniden

Uniden EXLI 8962 Bedienungsanleitung

Uniden

Uniden EXT 1960 Benutzerhandbuch

Uniden

Uniden EXT 1865 Montageanleitung

Uniden

Uniden EXS9650 - EXS 9650 Cordless Phone Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung