Uniden EXV 98 Bedienungsanleitung

NOTE: Foldout the back cover of this owner’s manual to use the

handy “Controls and Functions” page for reference.

CONTENTS

Introduction......................................1

• Welcome ......................................1

• Features.......................................1

• Included in Your Package .........................2

Setting Up and Adjusting Your Phone..................3

• Desk or Tabletop Installation ......................3

• Wall Installation ................................4

• Direct Wall Mounting ............................5

• Installing the Handset Battery Pack .................6

• Charging the Battery Pack ........................6

• Setting the Pulse/Tone Switch .....................7

• Adjusting Ringer Controls .........................8

• Automatic Digital Code Security ....................8

• Ringer On or Off ................................9

• Page/Find .....................................9

• Attaching the Beltclip ............................9

• Cleaning Battery Contacts.........................9

Standard Use of Your New Phone....................10

• Making & Receiving Calls ........................10

• Chain Dialing .................................11

• Changing Channels.............................11

• Flash & Call Waiting ............................11

Programming Your Phone’s Voice Memory ...12

• Monitor Mode .................................12

• Voice Memory Entry Tips ........................13

• Storing a Phone Number in Voice Memory ..........14

• Storing a Mixed Mode Number....................15

• Erasing a Stored Number ........................16

• Dialing a Stored Number ........................16

• Reviewing Numbers in Voice Memory ..............17

• Dial Announce On/Off...........................18

Troubleshooting .................................19

Specifications....................................21

Controls & Functions ..................inside back cover

CONTENTS

OF YOUR OWNER’S MANUAL

IntroductionINTRODUCTION

WELCOME

Congratulations on your purchase of the Uniden EXV 98

cordless telephone integrated with VoiceDial technology. We

designed this phone to exacting standards to provide you

reliability, long life, and outstanding performance.

This phone comes in two colors, charcoal (EXV 98) and

ivory (EXV 98I).

FEATURES

•VoiceDial Voice Recognition

•30 Number Voice Memory

•900 MHz Long Range Performance

•40 Channel AutoScan

•UltraClear Plus Circuitry

•AutoTalk™

•Redial, Flash and Pause

•AutoSecure™

•Pulse/Tone Dialing

•AutoStandby™

•Page/Find

•14 Day Long Life Battery

•7 Hour Talk Time

•Speaker and Ringer Volume Control

•Any Key Answer

•Hearing Aid Compatible

VoiceDial is a technological breakthrough designed to

recognize and respond to the sound of your voice. Just say

the name of the person you want to call and VoiceDial

automatically dials the number for you.

UltraClear Plus™uses true compander circuitry to virtually

eliminate background noise and to provide you with crystal

clear reception.

To protect you against misbilled calls that might result from

your phone being activated by other equipment, Random

Code™digital security automatically selects one of over

65,000 digital security codes for the handset and base. In

addition, the AutoSecure™feature electronically locks your

phone when the handset is in the base.

INTRODUCTION

TO YOUR NEW VOICEDIAL PHONE

INTRODUCTION

INCLUDED IN YOUR PACKAGE

•This Owner’s Manual

•Precautions and Important Safety Instructions

•Registration Card

Handset Base AC Adapter

Rechargeable Battery Short Telephone Cord Beltclip

Long Telephone Cord Wall Mount Adapter with Screws

TIP

To get the most from your

phone, please read this

owner’s manual

thoroughly. Also, be sure

to complete and mail the

product registration form.

WARNING

If any of these items are

missing or damaged,

contact the Uniden Parts

Department at

(800)554-3988, 8:00 a.m.

to 5:00 p.m. Central,

Monday through Friday, or

www.uniden.com.

Setting Up and Adjusting Your PhoneSETTING UP

DESK/TABLETOP INSTALLATION

1) Plug the AC adapter cord into the 9 VDC input jack on the

back of the base.

2) Wrap the AC adapter cord around the strain relief notch.

Place the power cord so that it does not create a trip

hazard or where it could become chafed and create a fire

or electrical hazard.

3) Plug the AC adapter into a standard 120 VAC wall outlet.

4) Charge the battery (refer to “Charging the Battery Pack,”

page 6).

5) Plug one end of the long telephone cord into the

TEL LINE

jack on the back of the base.

6) Plug the other end of the cord into your telephone jack on

the wall.

7) Place the base on a desk or tabletop.

Then, place the handset into the base as

shown.

In desk/tabletop installation, the handset is

designed to stand vertically in the base.

When using on a flat surface, DO NOT lay

the handset down on the base.

8) Raise the base antenna to the

vertical position.

AND ADJUSTING YOUR PHONE

SETTING UP

Use only the Uniden AC adapter supplied with this phone.

DO NOT use an outlet controlled by a wall switch.

TIP

Before choosing a location

for your phone, read the

“Installation Considerations”

included in the “Precautions

and Important Safety

Instructions” brochure.

WALL INSTALLATION

▼Standard wall plate mounting

This phone can be mounted on a

standard AT&T or GTE wall plate.

To attach the wall mount adapter to

the base:

1) Slide the wall mount adapter into the

notches at the top of the base.

2) Pivot the wall mount adapter down and

snap into place.

3) Plug the AC adapter into the base.

4) Wrap the AC adapter cord around

the strain relief notch. Then, put the AC

adapter cord inside the molded wiring

channel. Plug the AC adapter into a

standard 120 VAC wall outlet.

5) Plug one end of the short

telephone cord into the

TEL LINE

jack on the base.

Place the telephone cord

inside the molded channel

on the bottom of the base.

Before you plug the other

end of the telephone cord

into the modular jack on

the wall, charge the battery

(refer to “Charging the Battery Pack,” page 6).

6) Place the base on the posts

of the wall plate and push

down until it’s firmly

seated.

HINT

Before choosing a location

for your phone, read the

“Installation Considerations”

included in the “Precautions

and Important Safety

Instructions” brochure.

CAUTION

Place the power cord so

that it does not create a

trip hazard or where it

could become chafed and

create a fire or electrical

hazard.

NOTE: DO NOT use an

outlet controlled by a

wall switch.

DIRECT WALL MOUNTING

If you do not have a standard wall plate, you can mount

your phone directly on a wall. Before mounting your phone,

consider the following:

•Select a location away from electrical cables, pipes, or

other items behind the mounting location that could cause

a hazard when inserting screws into the wall.

•Make sure the wall material can support the weight of the

base and handset.

•Use the #10 screws included with the wall mount adapter kit.

1) Insert 2 mounting

screws 3-15/16 inches

apart. Allow about 3/16

of an inch between the

wall and screw heads

for mounting the

phone.

2) Follow “Standard

Wall Plate Mounting”

steps 1 through 4 on

page 4.

3) Plug one end of the short telephone cord into the

TEL LINE

jack on the base. Put the cord inside the molded channel on

the bottom of the base.

4) Place the base on the screws and push down until it’s

firmly seated.

5) Plug the AC adapter into a standard 120 VAC wall outlet.

DO NOT use an outlet controlled by a wall switch.

6) Before you plug the other end of the telephone cord into the

modular jack on the wall, charge the battery (refer to

“Charging the Battery Pack,” page 6).

SETTING UP

NOTE: DO NOT use an outlet

controlled by a wall switch.

NOTE: Use ONLY the

Uniden AC adapter

supplied with this phone.

CAUTION

Before you plug the other

end of the telephone cord

into the modular jack on

the wall, charge the

battery. Refer to “Charging

the Battery Pack,” page 6.

INSTALLING THE HANDSET BATTERY PACK

1) Press in on the battery cover release

and slide the battery compartment

cover down.

2) Put in the rechargeable

Nickel-Cadmium battery pack. The

battery pack fits with the electrical

contacts touching. The label side on

the battery pack should be facing up.

3) Slide on the battery cover and snap

it into place.

CHARGING THE BATTERY PACK

▼Initial battery charging

Before using your phone for the first time, fully charge the

rechargeable Nickel-Cadmium battery pack. We recommend

that the battery pack charge for approximately 15-20 hours,

without interruption, before plugging the phone line into

your new phone.

1) Place the handset on the base.

2) Make sure the

status

LED lights. If the LED doesn’t light,

check to see that the AC adapter is plugged in and that the

handset makes good contact with the base charging contacts.

Continued

HINT

Before using your phone,

fully charge the

rechargeable Nickel-

Cadmium battery pack.

We recommend that the

battery pack charges for

15-20 hours.

HINT

When recharging the

battery pack, allow 15 to

20 hours without

interruption for the

handset to fully recharge.

NOTE: In desk/tabletop

use, the battery charges

only in the vertical

position. When wall

mounted, hang the

handset on the cradle.

Use only the Uniden

battery (BT-098) supplied

with your phone.

CHARGING THE BATTERY PACK continued

▼Battery memory effect

Rechargeable batteries can develop a reduced charge capacity

caused by repeated charge and discharge cycles.

Rechargeable batteries that have developed this effect will

not operate to their fullest capacity.

To avoid memory effect, before recharging, operate the unit

until the rechargeable battery completely discharges. DO NOT

“top off” the charge by placing the handset on the base after

using for a short time.

To erase memory effect, operate the unit until the

rechargeable battery is completely discharged, then fully

recharge. Repeat this process at least 3 times.

▼Low battery indicator

When the battery pack is very low and

needs to be charged, the phone is

programmed to eliminate its functions

to save power. If the phone is not in use, the

talk

LED flashes every 3 seconds and none of the

buttons will operate. If you are using the phone,

the handset beeps and the

talk

LED flashes every

3 seconds. Complete your conversation as quickly

as possible. Return the handset to the base to

recharge the battery pack.

SETTING THE PULSE/TONE SWITCH

Be sure the

PULSE/TONE

switch is in the

TONE

position.

SETTING UP

NOTE

Allow 15 to 20 hours

without interruption for

the handset to fully

recharge.

TIP

Most phone systems use

tone dialing. Check with

your local phone company

if you are not sure

whether your system is

tone or pulse dialing.

ADJUSTING RINGER CONTROLS

▼Ringer tone and volume

With no call in progress, press

ringer

The phone has 3 ringer tones with 2

volume levels - one soft and one loud.

Each time you press

ringer

, the ringer

tone changes. Each time you

press

volume

, the ringer

volume changes.

▼Receiver volume

While on a call, press

volume

The phone has two receiver volume

levels - one soft and one loud. Each

time you press

volume

, the receiver

volume changes.

AUTOMATIC DIGITAL CODE SECURITY

To avoid unauthorized calls on your phone, a digital code

was added to the EXV 98 phone. Only the handset and base

share this digital code. The code will automatically set when

you first use the phone.

▼To change the digital code:

1) Place the handset on the base.

2) Press

page/find

on the base.

The handset will beep for about 6 seconds.

3) When the beeping stops, briefly remove the handset and then

return it to the base.

The

status

LED blinks to indicate that the digital security

code is set to one of the more than 65,000 codes.

▼To establish communication between the handset and base:

1) Restore power to the base.

2) Place the handset on the base. The

status

LED blinks to

indicate that the digital security code is set.

IMPORTANT

You can change the

receiver volume only when

you are on a call.

TIP

If the base loses power

while the handset is off the

base, the digital code may

be erased. If this happens,

the handset won’t

function. You need to

reestablish the connection

between the handset

and base.

RINGER ON OR OFF

The ringer is on when the switch

is in the

RING ON

position. To

turn off the ringer, move the

switch to the

BATT SAVE

position. Now, when a call comes

in, the

talk

LED will flash but the

ringer will be silent.

PAGE/FIND

To locate the handset

(while it’s off the base),

press

page/find

on the

base. The handset beeps

for about 6 seconds.

ATTACHING THE BELTCLIP

1) Put the tab (at the belt clip top)

into the notch at the top of

handset back.

2) Snap the bottom tabs into both

CLIP

notches until secure.

CLEANING BATTERY CONTACTS

To maintain a good charge,

clean all charging contacts

on the handset and base

about once a month.

Use a pencil eraser or other

contact cleaner. DO NOT use

any liquids or solvents.

SETTING UP

WARNING

When cleaning battery

contacts, DO NOT use any

liquids or solvents.

Inhaltsverzeichnis

Andere Uniden Schnurloses Telefon Handbücher

Uniden

Uniden EXI2926 Bedienungsanleitung

Uniden

Uniden EXP92 Bedienungsanleitung

Uniden

Uniden TRU9380-3 - TRU Cordless Phone Bedienungsanleitung

Uniden

Uniden DRX402 Bedienungsanleitung

Uniden

Uniden EXA915 Bedienungsanleitung

Uniden

Uniden XC630 Bedienungsanleitung

Uniden

Uniden XS9800 Bedienungsanleitung

Uniden

Uniden EXI 6960 Bedienungsanleitung

Uniden

Uniden DCT648-2 Series Bedienungsanleitung

Uniden

Uniden DSS 2475 Bedienungsanleitung

Uniden

Uniden EXI 7926 Bedienungsanleitung

Uniden

Uniden EXI2960 Bedienungsanleitung

Uniden

Uniden XS915 Bedienungsanleitung

Uniden

Uniden D3097 Series Bedienungsanleitung

Uniden

Uniden DCT 7488 SERIES Bedienungsanleitung

Uniden

Uniden TRU 5860 Series Produktinformationsblatt

Uniden

Uniden SS E15 Series Bedienungsanleitung

Uniden

Uniden EXS 2060 Bedienungsanleitung

Uniden

Uniden XS1210 Bedienungsanleitung

Uniden

Uniden DX3555 Bedienungsanleitung

Uniden

Uniden DXAI5588-3 Series Bedienungsanleitung

Uniden

Uniden EXS9600 Bedienungsanleitung

Uniden

Uniden MER 9600C Bedienungsanleitung

Uniden

Uniden D2280 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung