Uniden XS1215 Series Bedienungsanleitung

Series Owner's Manual

OWNER'S MANUAL

XS1215/XS1215 +1

WELCOME/ FEATURES 2

CONTROLS & FUNCTIONS 3

TERMS USED IN THIS MANUAL 5

Installing the Phone 6

When to Re-register Handsets 13

Basic Setup 14

Using Your Phone 18

Using the Speed Dial Memory 23

Caller ID and CIDCW (Caller ID on Call Waiting ) 28

Changing the Digital Security Code 32

Note on Power Sources 33

General Information

Troubleshooting

Index 40

Memory List 41

A. Choose the Best Location 6

B. Install the Rechargeable Battery Packs into

the Handsets 7

C. Connect the Main Base and Charging Cradle,

and Charge the Handsets 8

D. Mount the Main Base on a Wall 9

Installing the Beltclip 10

Headset Installation 11

Activating AutoTalk 14

Activating Caller ID on Call Waiting 14

Setting Name Tag (POP ID) 15

Setting Insert 0 16

Selecting the Ring Tone and Volume 17

Making and Receiving Calls 18

Transferring a Call 19

Redialing the Last Dialed Number 19

Adjusting the Earpiece Volume 20

Traveling Out-of-Range 20

Selecting a Different Channel 21

Find Handsets 21

Using Call Waiting 21

RocketDial 22

Voice Mail Waiting Indicator 22

Storing Names and Numbers in Speed Dial Memory 23

Storing Caller ID Messages in Speed Dial

Memory Locations

Making Calls from Speed Dial Memory 27

Easy Dial (New Zealand only) 27

Viewing the Caller ID Message List 29

Deleting Information from the Caller ID List 30

Making a Call from the Caller ID List 31

Caller ID on Call Waiting (CIDCW) 31

Liquid Damage 39

Warranty 42

Contents

[1]

Congratulations on your purchase of the Uniden single handset (XS1215) or dual handset (XS1215+1)

cordless telephone. This phone is designed and engineered to exacting standards for reliability, long

life, and outstanding performance.

Note: Illustrations in this manual may differ from the actual unit for explanation purposes. The

color of your cordless phone may vary.

* Requires subscription to service provided by your network supplier. There is usually a fee for this

service. Caller ID on Call Waiting service is currently only available in Australia.

Welcome

Features • Dual Handset System (Extra Handset &

Charger Included - XS1215+1 only)

• Call Transfer from Handset to Handset

(XS1215+1 only)

• Caller ID*

• Caller ID on Call Waiting*

• 3-Line Backlit LCD

• 30 Caller ID Memory

• 10 Number Memory Dialing

• Last Number Redial

• Voice Mail Waiting Indicator

• Tone Dialing

• Find Handset Key

• Earpiece/Ringer Volume Controls

• Mute or Turn Ringer Off

• Hearing Aid Compatible

• 20 Channel Auto Scan

• Desk or Wall Mountable

[2]

1. Handset Antenna

2. Jack for optional headset

3. Beltclip hole

4. Handset Battery Compartment

5. Handset Earpiece

6. LCD Display

7. key (P. 14 & 29)

8. (volume up/down earpiece volume,

ringer volume and scroll) key (P. 15, 17 & 20)

9. key (left cursor) key (P. 24)

10. key (P. 19 & 25)

11. key (P. 14 & 23) (XS1215)

key (P. 14, 21 & 23) (XS1215+1)

12. key (P. 22)

13. key (P. 18 & 21)

14. key (P. 18 & 20)

15. (right cursor) key (P. 24)

16. key (P. 23)

17. key (P. 21 & 24) (XS1215)

key (P. 19 & 24) (XS1215+1)

18. Handset Microphone

19. Handset Charging Contacts

caller id/menu

/ /vol/

/tone/

redial/pause

select

select/channel

Rocketdial

talk/flash

end

memory

delete/channel

delete/transfer

[3]

XS1215 Handset

Controls & Functions

XS1215+1 Handset

Main Base Extra Charging Cradle (XS1215+1 only)

20. Main base charging

contacts

21. find handset key

(P. 21 & 32)

22. Charge/in use and VMWI

(Voice Mail Waiting

Indicator) LED

23. DC IN 9V jack

24. Telephone line jack

25. Charging contacts

26. Charge LED

27. DC IN 9V jack

[4]

[5]

Terms Used in this Manual

• Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The

key has not been pressed and there is no dial tone.

• Talk Mode - The handset is off the cradle and the key has been pressed,

enabling a dial tone.

• CID - Caller ID

• CIDCW - Caller ID on Call Waiting

• RocketDial - One touch speed dial

• POP ID (Name Tag) - Name is shown when Caller ID matches a phonebook entry

where a name is stored.

talk/flash

Installing the Phone

Do the following steps:

A. Choose the best location

B. Install the rechargeable battery pack into the handset

C. Connect the base unit and charging cradle (XS1215+1 only), and charge the handset

D. Mount the base unit on a wall

E. Choose the dialing mode

When choosing a location for your new phone, here are some important guidelines you should

consider:

• The location should be close to both a phone jack and a continuous power outlet (one which is not

connected to a switch).

• The base and handset should be kept away from sources of electrical noise such as motors and

fluorescent lighting.

• The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For better

reception, place the base as high as possible.

• The base should be placed in an open area for optimum range and reception.

A. Choose the best location

Avoid noise sources such as a window

by a street with heavy traffic

Avoid heat sources, such as radiators,

air ducts, and sunlight

Choose a central location

Avoid other cordless telephones

Avoid personal computers

Avoid excessive moisture, extremely

low temperatures, dust, mechanical

vibration, or shock

Avoid microwave ovens

Avoid television sets and

other electronic equipment

If your home has

specially wired alarm

equipment connected

to the telephone line,

be sure that installing

the system does not

disable your alarm

equipment.

If you have questions

about what will

disable your alarm

equipment, contact

your telephone

company or a

qualified installer.

[6]

INSTALLING THE PHONE

B. Install the Rechargeable Battery Pack into the Handset

The handset(s) are powered by rechargeable battery

packs. The battery recharges automatically when

the handset is placed in the charging cradle.

1) Press down on the handset battery case cover (use

the finger indention for a better grip) and slide the

cover downward to remove.

2) Plug the battery pack connector (red & black wires)

into the jack inside the battery compartment.

(The connector notches fit into the grooves of the

only one way.) Match the wire colors to the

polarity label in the battery compartment, connect

the battery and listen for a click to insure

connection.

3) Make sure you have a good connection by slightly

pulling on the battery wires. If the connection is

secure, the battery jack will remain in place.

4) Place the battery case cover back in the handset by

sliding it upwards until it clicks into place.

Repeat process for second handset

(XS1215+1 only).

Use only the Uniden

(BT-905) rechargeable

battery pack supplied

with your cordless

telephone.

[7]

C. Connect the Main Base and Charging Cradle (XS1215+1 only), and Charge

the Handsets

1) Connect each AC adapter to the jack and

to each standard AC wall outlet.

2) Place one handset in the main base (and the other

in the charging cradle - XS1215+1 only) with the

keypad facing forward.

3) Make sure the LED (and

LED - XS1215+1 only) illuminate. If the LED does

not illuminate, check to see that the AC adapter is

plugged in and the handset makes good contact

with the cradle's charging contacts.

• Connect each AC adapter to a continuous power supply.

• Place each cradle close to the AC outlet to avoid long extension cords.

4) Charge your handset(s) at least 15-20 hours before

plugging the phone line.

5) Once the handset battery pack(s) are fully charged,

connect the telephone line cord to the

jack and a telephone outlet. If your telephone outlet

isn't modular, contact your telephone

company for assistance.

DCIN 9V

240V

charge

TEL LINE

charge/in use

Use only the

supplied AAD-

210 AC adapter.

Do not use any

other AC

adapter.

Do not place the

power cord

where it creates

a trip hazard or

where it could

become chafed

and create a fire

or electrical

hazard.

[8]

INSTALLING THE PHONE

(XS1215+1 only)

Australia

Telephone cord adaptor

(not supplied)

D. Mount the Main Base on a Wall

Standard wall plate mounting

DC IN 9V

240V

TEL LINE

This phone can be mounted on any standard wall plate.

1) Locate the base unit on the wall mount

adapter as shown and slide the wall mount

adapter into the notches on the base bottom

with the tab pressed.

2) Plug the AC adapter to the jack.

3) Route the AC adapter cord through the

molded wiring channel as shown.

4) Plug the AC adapter into a standard

AC wall outlet.

5) Plug the telephone line cord into the

jack. Route the cord

through the molded wiring channel

as shown.

6) Plug the telephone line cord into the

telephone outlet.

7) Align the mounting slots on the main base

with the mounting posts on the wall.

Then push in and down until the phone is

firmly seated.

[9]

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Uniden Mobilteil Handbücher

Uniden

Uniden TCX 805 Bedienungsanleitung

Uniden

Uniden XDECT SSE35 Series Bedienungsanleitung

Uniden

Uniden DCX400 Bedienungsanleitung

Uniden

Uniden DCX770 - DCX 770 Cordless Extension Handset Bedienungsanleitung

Uniden

Uniden WDECT 2355 Bedienungsanleitung

Uniden

Uniden DWX337 Bedienungsanleitung

Uniden

Uniden TRUc46 Bedienungsanleitung

Uniden

Uniden DCX170BT Bedienungsanleitung

Uniden

Uniden DCX170 Bedienungsanleitung

Uniden

Uniden DCX210 Bedienungsanleitung

Uniden

Uniden XDECT 7005 Bedienungsanleitung

Uniden

Uniden DECT 1715+1 Bedienungsanleitung

Uniden

Uniden DCX170 Bedienungsanleitung

Uniden

Uniden DECT1820 Bedienungsanleitung

Uniden

Uniden XDECT 8305WP Bedienungsanleitung

Uniden

Uniden DCX170BT Service-Handbuch

Uniden

Uniden XDECT SSE07 Bedienungsanleitung

Uniden

Uniden Elite 8805 Bedienungsanleitung

Uniden

Uniden D1484 series Bedienungsanleitung

Uniden

Uniden DCX160 Service-Handbuch

Uniden

Uniden ELX500 Bedienungsanleitung

Uniden

Uniden DCX700 Bedienungsanleitung

Uniden

Uniden XC631Plus Bedienungsanleitung

Uniden

Uniden DCX400 Bedienungsanleitung

Beliebte Mobilteil Handbücher anderer Marken

Swissvoice

Swissvoice ePure HD Bedienungsanleitung

Philips

Philips TD6736/BH051P Bedienungsanleitung

ASCOM

ASCOM I62 - Bedienungsanleitung

LG-Ericsson

LG-Ericsson LIP-9010 Bedienungsanleitung

GE 1583 Bedienungsanleitung

iiNet

iiNet Handset Bedienungsanleitung

ASCOM

ASCOM 9p23 Bedienungsanleitung

AT&T

AT&T DLP70110 Bedienungsanleitung

AirCell

AirCell ST 3100 Bedienungsanleitung

Eaton

Eaton HHIR-LCD-PROG Montageanleitung

Mitel

Mitel 112 Bedienungsanleitung

SBC

SBC SBC-381H Bedienungsanleitung

Mitel

Mitel 5602 Bedienungsanleitung

ASCOM

ASCOM d81 Messenger Montageanleitung

SpectraLink

SpectraLink 7522 Bedienungsanleitung

Avaya

Avaya L100 Series Anleitung zur Verwendung

ooma

ooma HD2 Handset Bedienungsanleitung

Yealink

Yealink IPW56 Bedienungsanleitung