Uniden BT229 - Bluetooth Headset Bedienungsanleitung

BT229 Bluetooth® Headset User’s Guide

Also in this package:

AC (indoor) power adapter

Questions? Problems? Get help on the web at www.uniden.com

or call our Customer Service line at 800-292-2294.

Extra ear cushion

Getting to Know the Headset

What the buttons do

Button Action HEADSET STATUS

Standby (No Calls Active) Incoming Call 1 Call Active

Multifunction

(MFB)

Quick Press (1 Beep) Last number redial Answer Call Close Call

2 seconds (2 Beeps) InitiateVoice Dialing Reject Call Transfer Active Call to/

from Phone

4 Seconds (3 Beeps) Turn Headset OFF Turn Headset OFF Turn Headset OFF

Volume UP (+)

Quick Press (1 Beep) Increase Volume Increase Volume Increase Volume

2 Seconds (2 Beeps) - - -

4 Seconds (3 Beeps) - - Hold/Resume Call

Volume DOWN (-)

Quick Press (1 Beep) Decrease Volume Decrease Volume Decrease Volume

2 Seconds (2 Beeps) - - Microphone Mute

4 Seconds (3 Beeps) - - Close/Resume Call

Note: The headset initiates the function only after the button is released.

* Specications and features are subject to change without notice.

What the LED colors mean

Color State Meaning

Red Steady The headset is currently charging. When the battery is fully charged, the LED turns o.

Flashing The headset is turned o. If the headset is also beeping, the battery is low.

Blue

Flashing The headset is turned on.

One ash

every 5 seconds The headset is in standby and not paired to a Bluetooth device.

Two ash

every 5 seconds The headset is currently paired to a Bluetooth device.

Red & blue Alternating ash The headset is in pairing mode.

Setting Up Your Headset

Charge the battery

Before using your headset, charge the battery for at least 8 hours. Charging the battery

completely (and keeping it charged) will help you get the longest possible talk and standby

time out of the battery.

Connect the adapter to the Power connector on the top of the headset, then plug it into

any standard 120 V AC (regular indoor) AC outlet.

Make sure that your headset is fully charged before you start using it. When your headset is

charged, the red light is solid.

When the battery needs to be recharged, you will hear warning beeps every 20 seconds

and see the red light (depending on your headset status).

Use ONLY the AC adapter supplied with the headset! Using any other adapter could

damage your headset, create a re hazard, or cause a risk of electric shock!

Pair the headset to your Bluetooth phone

Pairing is like “introducing” two Bluetooth devices and giving them permission to connect

to each other. If you want to use the headset with more than one phone, you need to pair

it with each phone separately. Once you pair a phone to the headset, the two devices can

connect automatically whenever they can detect each other.

Before you can use your headset, you must pair it with a Bluetooth-enabled device (such as

Bluetooth mobile phone).

1: Make sure the headset is powered o and the power adapter is not connected (you

can’t use the headset while it’s charging).

2: Press and hold MFB until the LED ashes alternating red and blue (approximately 6

seconds), then release. The headset is in pairing mode and should be visible to other

Bluetooth devices.

3: Set your Bluetooth phone into discover mode. (Check the manual that came with your

phone for instructions.)

4: When your phone asks if you want to pair with the headset, conrm this by pressing“yes”

or “ok”.

5: When the phone asks for a passkey or PIN, enter 0000 (4 zeros).

IMPORTANT!

When the headset successfully pairs with a device, the red light ashes twice every 5

seconds. If pairing failed, the blue light ashes once every 5 seconds.

Connecting to your phone

Most phones connect to the headset as soon as you pair it; if yours won’t, turn the headset

o and back on. If headset still won’t connect, check your phone’s owner’s manual for

additional Bluetooth information.

Once the headset is paired:

Whenever you turn the headset on, it will automatically try to connect to whatever device

►

it was connected to last.

If the headset loses the connection (e.g., if your phone is out of range), it should reconnect

►

automatically. To manually reconnect, press MFB.

If the headset goes more than 1 hour with no connection, it automatically turns o.

►

Using Your Headset

Turning headset on/o

To: Follow these steps:

Turn the headset on Press and hold the MFB for about 4 seconds. When you see the blue light

ashing and hear the turn-on melody, release the button.

Turn the headset o Press and hold the MFB for about 4 seconds. When you see the red light

ashing and hear the turn-o melody, release the button.

Put your headset on

Insert the ear cushion, then wrap the earhook behind your ear.

Everyone’s ear has a sweet spot, a particular angle of the speaker where

the audio comes in loud and clear. Take a few minutes to move the

headset around until you nd the best angle for the ear cushion.

Wearing the headset on your left ear

If you want to wear the headset on your left ear, take the earhook

o and turn it over.

Available Features

After the headset is connected, you can use the following features:

Make a call

Just make the call from your mobile phone as usual; your phone should automatically send the

call to the headset. If your phone doesn’t, press and hold MFB for 2 seconds to send the call to the

headset manually.

Answer a call While the phone is ringing, press MFB.

Ending a call Press MFB

Reject an incoming

call

While the phone is ringing, press and hold MFB for at least 2 seconds.Wait until you hear a beep

before you release the button.

Transferring a call Press and hold MFB for 2 seconds to transfer the current call from your phone to headset (and

back).

Last number dialing With the phone in standby, press MFB. The headset automatically dials the last number you dialed

from your phone.

Using voice-activated

dialing

Note:Your phone must support voice dialing, and all voice commands must already be

programmed. With the mobile phone in standby, press and hold the MFB for 2 seconds.

When you hear beep, release the button. Start using your phone’s voice commands.

NOTE: For best results, try recording your voice tags through your headset.

Call-Waiting

Note: To use this feature, you must subscribe to Call Waiting through your service provider,

and your phone must support the hands-free prole.

•To put your current call on hold and switch to a waiting call, press and hold Volume Up for

about 4 seconds. Wait until you hear 3 beeps, then release the button; you’ll be connected

to the waiting call. Press and hold Volume Up again to switch back to the current call.

•To hang up your current call and switch to a waiting call, press and hold Volume Down for

about 4 seconds. Wait until you hear 3 beeps, then release the button.

Volume control & Mute function

Use Volume Up and Volume Down to adjust the volume.

To mute the microphone so the caller can’t hear you, press and hold VolumeDownfor 2 seconds.

The headset plays a melody every 10 seconds to remind you the microphone is muted.

To turn the microphone back on, press either Volume Up or Volume Down.

Andere Handbücher für BT229 - Bluetooth Headset

Inhaltsverzeichnis

Andere Uniden Headset Handbücher

Uniden

Uniden BT229 - Bluetooth Headset Service-Handbuch

Uniden

Uniden BT-109 Bedienungsanleitung

Uniden

Uniden BTHS500 Bedienungsanleitung

Uniden

Uniden DECT HS950 Bedienungsanleitung

Uniden

Uniden BT110 Service-Handbuch

Uniden

Uniden BT230 Bedienungsanleitung

Uniden

Uniden BT359 Bedienungsanleitung

Uniden

Uniden BTS200 Bedienungsanleitung

Uniden

Uniden BT-955 Bedienungsanleitung

Uniden

Uniden BT229 - Bluetooth Headset Bedienungsanleitung

Uniden

Uniden BT230 Service-Handbuch

Uniden

Uniden BTS200 Bedienungsanleitung

Uniden

Uniden BT112APT Bedienungsanleitung

Uniden

Uniden BT108 Service-Handbuch

Uniden

Uniden BT-109 Bedienungsanleitung

Uniden

Uniden EXAI 7248 SERIES Bedienungsanleitung

Uniden

Uniden DHS100 Bedienungsanleitung

Uniden

Uniden BT112 Bedienungsanleitung

Uniden

Uniden BT110 Bedienungsanleitung

Beliebte Headset Handbücher anderer Marken

Sena

Sena SMH10 Bedienungsanleitung

IASUS

IASUS Stealth IA-NT4-BASIC-BT Bedienungsanleitung

Sennheiser

Sennheiser EPOS ADAPT 230 Bedienungsanleitung

GE 98971 Bedienungsanleitung

Hama

Hama 00184070 Bedienungsanleitung

Plantronics

Plantronics Blackwire 3200 Series Bedienungsanleitung

Blue Tiger

Blue Tiger Advantage PLUS Bedienungsanleitung

Jawbone

Jawbone Icon Bedienungsanleitung

Jabra

Jabra FR 20 Bedienungsanleitung

Roxcore

Roxcore Flow A+ Bedienungsanleitung

Turtle Beach

Turtle Beach XP 510 Bedienungsanleitung

Philips

Philips SHB6101 Bedienungsanleitung

Jabra

Jabra PRO 9460 Duo Bedienungsanleitung

HyperX

HyperX HyperX Cloud Flight Bedienungsanleitung

Bose

Bose MIE2 Mobile Bedienungsanleitung

Jabra

Jabra Steel Bedienungsanleitung

HyperX

HyperX cloud ii Bedienungsanleitung

Southwing

Southwing SA505 Bedienungsanleitung