Unimes U10 Bedienungsanleitung
Suzhou Unimes Information & Technology Co., Ltd
Mobile Data Terminal
U10 User Manual
Contents
1
Introduction................................................................................................................................... 1
1.1 Appearance of U10....................................................................................................................................1
1.2 Installing the Battery..................................................................................................................................2
1.3 Removing the Battery................................................................................................................................2
1.4 Inserting a SIM Card..................................................................................................................................2
1.5 Inserting a TF Card....................................................................................................................................3
1.6 Charging......................................................................................................................................................4
2.1 Powering On/Off the U10......................................................................................................................... 5
2.2 Locking and Unlocking the U10...............................................................................................................5
2.3 Keys............................................................................................................................................................. 5
2.4 Home Screen..............................................................................................................................................6
2.5 Status Icons and Indicators...................................................................................................................... 6
2.6 Basic Settings.............................................................................................................................................7
3
Call Function............................................................................................................................... 12
3.1 Making a Call............................................................................................................................................12
3.2 Contacts.................................................................................................................................................... 12
3.3 SMS and MMS......................................................................................................................................... 13
3.4 Email..........................................................................................................................................................14
4
Network Connection and Connection Synchronization.................................................. 16
4.1 GPRS Data Connection..........................................................................................................................16
4.2 Wi-Fi Network Connection......................................................................................................................17
4.3 Bluetooth................................................................................................................................................... 17
4.4 GPS........................................................................................................................................................... 19
4.5 Connecting the U10to a PC....................................................................................................................19
4.6 Synchronization....................................................................................................................................... 20
5
Enabling the Scan Function.................................................................................................... 21
5.1 To start the iScan program and enable scanning, do as follows...................................................... 21
6
Enabling the NFC Function..................................................................................................... 22
6.1 To enable the NFC function, do as follows...........................................................................................22
7
Managing the U10.......................................................................................................................23
7.1 Installing Applications..............................................................................................................................23
7.2 Uninstalling Applications.........................................................................................................................23
7.3 Managing Applications............................................................................................................................24
8
Precautions and Troubleshooting......................................................................................... 25
8.1 Precautions...............................................................................................................................................25
8.2 Troubleshooting....................................................................................................................................... 26
Appendix..........................................................................................................................................29
U10User Manual
-3-
1
Introduction
1.1
Appearance of U10
Figure 1-1 Front view of U10
-4-
U10User Manual
1.2
Installing the Battery
1.
Push the battery to the bottom of the battery compartment and press itdownwards.
2.
Push the battery cover lock to the right to lock the battery cover.
1.3
Removing the Battery
1.
Push the battery cover lock to the left.
2.
Pull up the battery cover from the groove at the upper end of the battery cover.
(Note: The U10adapts integrated design for the battery and batterycover.)
1.4
Inserting a SIM Card
1. Insert a SIM card by following the direction in the figure below.
(Note: Micro SIM cards are applicable to the U10. After replacing a SIM card, restart the
U10.)
-5-
U10User Manual
1.5
Inserting a TF Card
1.
Push the card cover by following the OPEN direction marked on the card cover.
2.
Open the card cover upwards and insert a TF card, as shown in the figure below.
3.
Close the card cover, as shown in the figure below.
4.
Pull back the card cover by following the LOCK direction marked on the card cover.
(Note: TF cads, namely Micro SD cards, are applicable to the U10. After replacing a TF card,
restart the U10.)
-6-
U10User Manual
1.6
Charging
You can charge a battery in the following ways:
1.
Bottom charging cable;
2.
1-slot charging & communication stand (to be purchased separately).
Description of charging indicator:
When the battery is in the charging status, the charging indicator is in red.
When the battery is fully charged, the charging indicator is in green.
When the battery volume is low,
(1)
a message indicating that the battery volume is less than 20% is displayed on the
screen.
(2)
the U10gives out a low battery prompt tone.
(3)
the charging indicator blinks in red.
★Tips
The following operations help obtain a longer standby duration of the U10.
Shorten the time to sleep by selecting Settings > Display > Sleep.
Set the screen brightness to a small value by selecting Settings > Display > Brightness.
Disable functions that are not frequently used, for example, GPS, Bluetooh, Wi-Fi and 3G
communication.
-7-
U10User Manual
2
Using the U10
2.1
Powering On/Off the U10
After installing a SIM card and a battery and charging the U10completely, you can use the
U10.
1.
To power on the U10, press the On/Off key on the right for some time. The
U10vibrates, displays the startup screen and enters the Android OS after the guide
progress is complete. It takes some time for the U10to initialize. Please wait patiently.
2.
Topower off the U10, press the On/Off key on the right for some time. A dialog box
that provides shutdown options is displayed. Click Power Off.
2.2
Locking and Unlocking the U10
Locking the U10
Press the On/Off key momentarily to lock the U10. If you do not perform any
operation for the U10within the default locking time, the U10is automatically locked.
Unlocking the U10
Press the On/Off key momentarily and slide the unlock
key to the right on the screen.
2.3
Keys
The U10provides a physical keypad that consists of four keys, as shown in the figure
below.
On the physical keypad of the U10, keys are respectively home key, menu key, scan key,
and back key from left to right.
Home key: used to go back to the home screen.
Menu key: used to show menus.
Scan key: used to scan.
Return key: used to return to the previous operation screen.
-8-
U10User Manual
2.4
Home Screen
Return key
Scan key
Menu key
Home key
By default, the U10has one home screen. You can add home screens by placing
applications to the home screen and slide to the left or right to switch to another home
screen. On the home screen, click the icon of any application to open the application.
Application tray
★Tips
You can freely add or delete the icon of an application in the blank of the home screen.
If you click the application tray, all applications can be viewed.
2.5
Status Icons and Indicators
Status icons and indicators are in the status bar at the upper part of the screen and show
device status and notifications.
-9-
U10User Manual
Table 2-1 Status icons
Icon
Description
Icon
Description
WLAN
Signal strength
Bluetooth
Flight mode
USB connection
Network access restricted
Missed calls
USB debugging
New messages
Charging
Modem logs
Battery full
Silent mode
Multiple notification icons,
which are beyond the scope
of display
Application permission
EDGE
Connection between USB
and PC pea pod
★Note
As software is upgraded continuously, status indicators may be different from those
displayed on the U10. The actual status indicators prevail.
2.6
Basic Settings
2.6.1 Date and Time Settings
To change the date and time in the U10, do as follows:
1.
Find the following icon.
U10User Manual
-10 -
2.
Select Settings >Date & time >Set date or Set time.
2.6.2 Display Setting
1.
Find the following icon.
2.
Select Settings >Display >Lock screen
notification/Wallpaper/Brightness/Auto-rotatescreen/Sleep/Interactive
screensaver/Font size/Cast screen.
Inhaltsverzeichnis
