Unit UT71A Bedienungsanleitung

P/N:110401103779

Model UT71A/B/C/D/E

OPERATING MANUAL

CHAPTER TITLE PAGE

Model UT71A/B/C/D/E: OPERATING MANUAL

TABLE OF CONTENTS

Before You Start

Overview

Unpacking Inspection

Safety Information

Rules For Safe Operation

International Electrical Symbols

Getting Acquainted

Turning the Meter On

Battery Considerations

Automatic Power Off

Automatic Backlight Off

Low Battery Indication

The Meter Structure

Rotary Switch

Functional Buttons

The Meter Functions Vs Displays

Selecting the Range

Understanding the Display

Model UT71A/B/C/D/E: OPERATING MANUAL

CHAPTER TITLE PAGE

Analogue Bar Graph

Using MAX MIN

Making Measurements

Introduction

A. Measuring Voltages

B. Measuring Currents

C. Measuring Resistance

D. Testing for Continuity

E. Testing Diodes

F. Measuring Capacitance

G. Measuring Frequency / Duty Cycle

H. Measuring Temperature

I. 4~20mA loop current as % readout

J. Power Measurement

Using Stores, Recall and Send Features

Introduction

Storing and Clearing Readings

Recalling Stored Readings

Using Send

Model UT71A/B/C/D/E: OPERATING MANUAL

CHAPTER TITLE PAGE

Changing the Default Setting

Introduction

Selecting Setup Options

Maintenance

A. General Service

B. Replacing the Fuses

C. Replacing the Battery

Specifications

Safety and Compliances

Physical Specifications

General Specifications

Feature Summary

Basic Specifications

Detailed Accuracy Specifications

A. DC Voltage

B. AC Voltage

C. DC Current

D. AC Current

Model UT71A/B/C/D/E: OPERATING MANUAL

CHAPTER TITLE PAGE

E. Resistance

F. Continuity Test

G. Diode Test

H. Capacitance

I. Frequency

J. Temperature Degrees Celsius Fahrenheit

K. 4~20mA loop current

L. Power Measurement

Model UT71A/B/C/D/E: OPERATING MANUAL

Chapter 1

Before You Start

Overview

This Operating Manual covers information on safety and cautions. Please read the relevant information carefully and

observe all the Warnings and Notes strictly.

Warning

To avoid electric shock or personal injury, read the"Safety Information"and "Rules for Safe Operation"carefully

before using the Meter.

Digital Multimeter UT71A/B (hereafter referred to as "the Meter") is a 20000 counts and 4 1/2 digits with steady

operations; Digital Multimeter UT71C/D/E (hereafter referred to as "the Meter") is a 40000 counts and 4 3/4 digits

with steady operations, fashionable structure and auto ranging instrument. They all not only can measure AC voltage

and current, DC voltage and current, Resistance, Capacitance, Temperature, Frequency, Diodes, Continuity, 4~20mA

Loop, Max/Min, Relative Mode but also has Data Store, Data Recall, AC True RMS, AC+DC,Low Battery Display,

Double Display Backlight, Data Hold, Automatic Power Off and full overload protection.

UT71B/C/D/E has extra Temperature, 4~20mA Loop, Data Store and Data Recall feature; UT71E has extra Power

Measurement feature.

Model UT71A/B/C/D/E: OPERATING MANUAL

Unpacking Inspection

Open the package case and take out the Meter. Check the items shown on Table 1-1 carefully to see any missing

or damaged part:

Table 1-1. Unpacking Inspection

Item Description Qty

In the event you find any missing or damage, please contact your dealer immediately.

English Operating Manual

Test Lead

K-Type (nickel chromium ~ nickel silicon) Point Contact Temperature Probe (It is

only suitable for measuring temperature under 230 oC

Alligator Clip

Test Clip

USB interface cable

CD-ROM (Installation Guide & Computer Interface Software)

Carrying Bag

Power Adaptor (UT71E only)

9V Battery (NEDA 1604, 6F22, 006P)

1 piece

1 pair

1 piece

1 pair

1 piece

Model UT71A/B/C/D/E: OPERATING MANUAL

Safety Information

This Meter complies with the standards IEC61010 safety

measurement requirement: in pollution degree 2,

overvoltage category (CAT. III 1000V, CAT.IV 600V)

and double insulation.

CAT. III: Distribution level, fixed installation, with smaller

transient overvoltage than CAT. IV

CAT.IV: Primary supply level, overhead lines, cable

systems etc.

Use the Meter only as specified in this operating manual,

otherwise the protection provided by the Meter may be

impaired.

In this manual, a Warning identifies conditions and

actions that may pose hazards to the user, or may

damage the Meter or the equipment under test.

A Note identifies the information that user should pay

attention to.

International electrical symbols used on the Meter and

in this Operating Manual are explained on page 9.

Rules For Safe Operation

Warning

To avoid possible electric shock or personal injury,

and to avoid possible damage to the Meter or to the

equipment under test, adhere to the following rules:

Before using the Meter inspect the case. Do not

use the Meter if it is damaged or the case (or part

of the case) is removed. Look for cracks or missing

plastic. Pay attention to the insulation around the

connectors.

Inspect the test leads for damaged insulation or

exposed metal. Check the test leads for continuity.

Replace damaged test leads with identical model

number or electrical specifications before using the

Meter.

Do not apply more than the rated voltage, as marked

on the Meter, between the terminals or between any

terminal and grounding.

The rotary switch should be placed in the right

position and no any changeover of range shall be

made during measurement is conducted to prevent

damage of the Meter.

Andere Handbücher für UT71A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Unit Multimeter Handbücher

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung