UNITED OFFICE UAV 250 A1 Bedienungsanleitung

IAN 277382

CROSS CUT SHREDDER UAV 250 A1

CROSS CUT SHREDDER

Operating instructions

DOKUMENTFÖRSTÖRARE

Bruksanvisning

SILPPURI

Käyttöohje

AKTENVERNICHTER

Bedienungsanleitung

DOKUMENTŲ NAIKIKLIS

Naudojimo instrukcija

NISZCZARKA DO DOKUMENTÓW

Instrukcja obsługi

GB Operating instructions Page 1

FI Käyttöohje Sivu 9

SE Bruksanvisning Sidan 17

PL Instrukcja obsługi Strona 25

LT Naudojimo instrukcija Puslapis 33

D / AT / CH Bedienungsanleitung Seite 41

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen kaikkiin toimintoihin.

Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant med

apparatens / maskinens funktioner.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi

funkcjami urządzenia.

Prieš skaitydami atsiverskite lapą su paveikslėliais ir susipažinkite su visomis prietaiso funkcijomis.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

- 1 -

Content Page

Introduction 2

Intended Application 2

Items supplied 2

Appliance description 2

Technical details 2

Overheating protection 2

Important safety instructions 3

Commissioning 4

Operation 4

Emptying the waste containers 5

Cleaning 5

Non-functionality 6

Disposal 6

Kompernass Handels GmbH warranty 7

Service 8

Importer 8

Read the operating instructions carefully before using the device for the first time and preserve

this booklet for later reference.

- 2 -

Cross Cut Shredder

Introduction

Congratulations on the purchase of your new appli-

ance.

You have clearly decided in favour of a quality

product. These operating instructions are a part of

this product. They contain important information in

regard to safety, use and disposal. Before using the

product, familiarise yourself with all of these opera-

ting and safety instructions. Use the product only as

described and only for the specified areas of appli-

cation. Retain these instructions for future reference.

In addition, pass these documents on, together with

the product, to any future owner.

Intended Application

This appliance is only suitable for shredding paper,

credit cards, CDs/DVDs and small staples (sizes:

24/6 and 23/6 (11.5 x 6mm), B-8 (11.5 x 7mm),

No10 (8.4 x 5mm)) and paper clips (up to 25 mm)

in private households. All other usages or modifica-

tions are regarded as improper and carry a significant

risk of accidents. Do not use this appliance for com-

mercial purposes.

Items supplied

Cross Cut Shredder

(Cutter attachment, waste container large/small)

Operating instructions

Appliance description

Figure A:

qCutter attachment

wSmall waste container

eViewing window

rLarge waste container

Figure B:

tCutter opening for CDs/credit cards

yCutter opening for paper

uSwitch

Technical details

Input voltage: 220 - 240 V ~, 50 Hz

Rated current : approx. 1.2 A

Nominal power: 250 W

Protection class: II

Large waste container: 21 litres

Cutting process for

paper: Cross-cut,

5 x 18 mm particles

Safety level 4

Working width: 220 mm

Cutting capacity: 10 sheets (80 g/m2)

Overheating protection

This appliance is fitted with overheating protection.

If the motor overheats due to overloading, the appli-

ance switches itself off automatically. If this occurs,

proceed as follows:

Caution:

Remove the power plug from the wall socket to avoid

unintended starting of the appliance

• Switch the appliance off by moving the switch u

to the middle position "OFF".

• Empty the waste containers w/r.

• Allow the appliance to cool down.

• Put the plug back into the socket.

• Switch the appliance on by moving the switch u

to the "AUTO" position.

We recommend that you let the appliance cool down

for about 30 minutes after 3 minutes of operation.

- 3 -

Important safety instructions

The following safety instructions must always be

complied with when using electrical appliances:

IDo not place the appliance in close vicinity to

sources of heat and water sources. There would

be the risk of fire and of receiving an electric

shock!

IDo not use the appliance close to inflammable

or explosive materials and/or ignitable gases or

in dusty environments. Risk of explosion!

IDo not use the appliance outdoors. The appliance

could be irreparably damaged!

To avoid potentially fatal electric

shocks:

IShould the power cable or the plug become

damaged, arrange for it/them to be repaired

by authorised specialists or Customer Services

as soon as possible.

IArrange for damaged or malfunctioning appliances

to be inspected and/or repaired by a qualified

specialist or the Customer Service Department

as soon as possible.

IDo not expose the appliance to rain and never

use it in a humid or wet environment.

IEnsure that the power cable never becomes moist

or wet during operation.

To avoid the risk of injury:

IThis shredder should be used by only one

person at a time.

INever leave the appliance unattended whilst in

use.

Keep loose clothing, long hair, jewellery, etc. well

away from the cutter opening.

NEVER insert your fingers into the cutter opening.

Keep children away from the appliance. They could

hurt themselves.

INEVER insert your fingers into the central hole of

a CD when you are feeding it into the appliance.

IKeep pets away from the appliance. They could

injure themselves.

IThis appliance is not intended for use by individuals

(including children) with restricted physical, physio-

logical or intellectual abilities or deficiences in

experience and/or knowledge unless they are

supervised by a person responsible for their safety

or receive from this person instruction in how the

appliance is to be used.

IThe packaging material can be a source of danger

for children. Dispose of the material immediately

after unpacking or keep it in a safe place not ac-

cessible to children.

ILay the power cable in such a way that no one

can tread on or trip over it.

Tips for safety:

IPlace the appliance in the immediate vicinity of an

electrical power socket. Do not use an extension

cable. Ensure that the appliance and the power

socket are easily and quickly accessible in the

event of an emergency.

INever overburden the appliance. This shredder

is designed for brief operating periods only.

IIn cases of danger, immediately remove the elec-

trical plug from the socket.

INEVER use this shredder for tasks for which it

was not designed.

IAlways be attentive! Always pay attention to

what you are doing and act with common sense.

Never use the appliance when you are distracted

or don’t feel well.

- 4 -

Commissioning

Take note: As every paper shredder is tested

for functionality after manufacture, it could hap-

pen that paper remnants may be found in the

cutters.

• Push the small waste container wonto the rails

inside the large waste container r.

• Place the cutter attachment qonto the large

waste container rso that the mains cable sticks

out to the rear.

• Insert the plug into a mains power socket.

Operation

You can shred up to 10 sheets (80g/m2

paper) at the same time.

Caution:

Never feed paper into the cutter opening if it still

has paper clips larger than 25 mm attached.

These could damage the cutting blades.

Switching the appliance on:

• Move the switch uto the position "AUTO" to

start shredding.

Inserting paper:

• Insert paper from above and in portrait format

into the cutter opening for paper y.

The motor starts automatically and switches itself

off automatically if no further paper is inserted.

You can shred up to 10 sheets (80 g/m2paper) at

the same time.

Note: Regularly remove any residue left in the

cutting blades with a suitable tool, e.g. a pair

of tweezers. Ensure that the appliance is un-

plugged before doing this!

Inserting credit cards:

• Insert the credit card from above into the middle

of the CD/credit card cutter opening t. You can

only shred one credit card at a time. ALWAYS insert

these into the CD/credit card cutter opening t

with the wide side first. If you do not, the magnetic

strip will not be destroyed.

Note: Always insert the credit card into the

middle of the CD/credit card cutter opening t.

Otherwise, the shredding process will not start!

Note: If the shredding process does not start

when you insert the credit card, carefully push

the credit card further into the CD/credit card

cutter topening with a flat object.

Note: If you want to ensure that the information

on the magnetic strip is irrevocably destroyed,

insert the credit card into the middle of the cutter

opening for paper y.

Note that the residue will then fall into the large

waste container r. if necessary, empty this be-

forehand in order to keep paper and plastic

waste separate.

Inserting a CD:

Warning!

NEVER insert your finger into the central hole of

a CD when you are feeding it into the appliance.

• Insert the CD from above into the middle of the

CD/credit card cutter opening t. You can only

shred one CD at a time.

- 5 -

Clearing a material blockage:

• Move the switch uto the "REV" ("reverse")

position if the material being shredded causes

a blockage.

The appliance now goes into reverse and the

material that is being shredded is ejected.

• Move the switch uto the "OFF" position as

soon as the jammed material has been ejected.

Switching the appliance off:

• Switch the appliance off by moving the switch u

to the "OFF" position.

Emptying the waste containers

• Empty the waste containers w/rregularly.

• Empty the large waste container rat the latest

when paper is visible in the viewing window e.

• Dispose of the waste material in an environmen-

tally responsible manner.

Emptying the large waste container

Caution:

Remove the power plug from the wall socket to avoid

unintentional starting of the appliance

• Remove the cutter attachment qfrom the large

waste container r.

• Pull the small waste container wupwards out of

the large waste container ron the guide rails.

• Empty the large waste container rand then re-

assemble the components.

Emptying the small waste container

• Remove the cutter attachment qfrom the large

waste container r.

• Pull the small waste container wupwards out of

the large waste container ron the guide rails

so that you can empty it.

• Empty the small waste container wand then

reassemble the components.

Cleaning

Danger!

Always remove the power plug before cleaning the

appliance. There is a risk of receiving an electric

shock!

Warning!

The cutters in the appliance are very sharp! Injury

hazard!

Attention:

Do not spray any oil or other lubricants into the cut-

ter openings t/y. These would irreparably dama-

ge the appliance!

• Remove any residue left in the cutting openings

t/yor cutting blades with a suitable tool, e.g.

a pair of tweezers. Ensure that the plug has been

disconnected.

• Clean the appliance with a lightly moistened

cloth. For stubborn soiling use a mild detergent

on the cloth.

- 6 -

Non-functionality

If the material to be shredded jams:

This means that you have inserted too much paper

into the appliance (max. 10 Sheets 80g/m2).

• Slide the switch 7into the position "REV" should

the paper to be shredded jam. The appliance

now goes into reverse and the material to be

shredded is returned.

• Pull the paper to be shredded out of the appliance

and then place the switch 7at "AUTO".

• The appliance is now once again ready for

operation.

If the appliance suddenly ceases operation:

This means that the appliance is overheated and

the automatic safety cut-out has activated itself.

Attention:

Remove the plug from the mains power socket to

avoid an unintended starting of the appliance.

• Set the switch 7to the "OFF" position.

• Allow the device to cool down.

• Insert the plug back into the socket.

• Switch the device on by setting the switch 7

to the "AUTO" position.

If the appliance doesn`t allow itself to be

switched on:

• Check that the plug is correctly connected to

a mains power socket.

• Try out a different mains power socket.

• The appliance is probably defective. Have the

appliance checked by qualified specialists.

• The appliance has overheated and triggered the

automatic safety switch-off. For this, proceed as

follows:

Attention:

Remove the plug from the mains power socket to

avoid an unintended starting of the appliance.

• Set the switch 7to the "OFF" position.

• Allow the device to cool down.

• Insert the plug back into the socket.

• Switch the device on by setting the switch 7to

the "AUTO" position.

Disposal

Do not dispose of the appliance in your

normal domestic waste. This product is

subject to the European guideline

2012/19/EU.

Dispose of the appliance through an approved dis-

posal centre or at your community waste facility.

Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal

centre.

Dispose of packaging materials in an

environmentally responsible manner.

- 7 -

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 3-year warranty valid from the

date of purchase. If this product has any faults, you,

the buyer, have certain statutory rights. Your statutory

rights are not restricted in any way by the warranty

described below.

Warranty conditions

The validity period of the warranty starts from the

date of purchase. Please keep your original receipt

in a safe place. This document will be required as

proof of purchase.

If any material or production fault occurs within

three years of the date of purchase of the product,

we will either repair or replace the product for you

at our discretion. This warranty service is dependent

on you presenting the defective appliance and the

proof of purchase (receipt) and a short written des-

cription of the fault and its time of occurrence.

If the defect is covered by the warranty, your product

will either be repaired or replaced by us. The repair

or replacement of a product does not signify the be-

ginning of a new warranty period.

Warranty period and statutory claims

for defects

The warranty period is not prolonged by repairs

effected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must be

reported immediately after unpacking. Repairs

carried out after expiry of the warranty period shall

be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance

with strict quality guidelines and inspected meticu-

lously prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product

parts subject to normal wear and tear or fragile

parts such as switches, batteries, baking moulds or

parts made of glass.

The warranty does not apply if the product has been

damaged, improperly used or improperly maintai-

ned. The directions in the operating instructions for

the product regarding proper use of the product

are to be strictly followed. Uses and actions that are

discouraged in the operating instructions or which

are warned against must be avoided.

This product is intended solely for private use and

not for commercial purposes. The warranty shall be

deemed void in cases of misuse or improper hand-

ling, use of force and modifications/repairs which

have not been carried out by one of our authorised

Service centres.

Warranty claim procedure

To ensure quick processing of your case, please

observe the following instructions:

Please have the till receipt and the item number

(e.g. IAN 12345) available as proof of purchase.

You will find the item number on the type plate, an

engraving on the front page of the instructions (bot-

tom left), or as a sticker on the rear or bottom of the

appliance.

If functional or other defects occur, please contact

the service department listed either by telephone or

by e-mail.

You can return a defective product to us free of

charge to the service address that will be provided to

you. Ensure that you enclose the proof of purchase

(till receipt) and information about what the defect

is and when it occurred.

Andere Handbücher für UAV 250 A1

Inhaltsverzeichnis

Sprachen:

Andere UNITED OFFICE Aktenvernichter Handbücher

UNITED OFFICE

UNITED OFFICE 100159 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE KH 4408 SHREDDER Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAVS 450 A1 Produktinformationsblatt

UNITED OFFICE

UNITED OFFICE UAV 250 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 380 A1 - 2 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 380 A1 - 2 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 380 A1 - 2 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 B2 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAVK 180 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 B2 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 150 A1 - 2 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 380 A1 - 2 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 C2 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 150 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 150 A1 - 5 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 150 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE KH 4407 SHREDDER Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 300 A1 Produktinformationsblatt

UNITED OFFICE

UNITED OFFICE UAVS 300 A1 Produktinformationsblatt

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung

GEHA

GEHA Home & Office S7 CD Bedienungsanleitung

Fellowes

Fellowes Powershred M-3C Bedienungsanleitung