Universal Remote Control Complete Control MX-810I Bedienungsanleitung

EUT Type: RF Remote Controller

FCC ID.: OZ5URCMX810I

Test Report No.: GETEC-E3-07-085

FCC Part 15 Subpart B,C

APPENDIX I

: USER’S MANUAL

Operating Your System

With the MX-810i

This remote control was

Custom Programmed for you by:

For questions about your Custom Programming call:

Custom Programming of a complex home theater and/or a multi-room

system is one of the most challenging tasks within an audio/video instal-

lation. It involves an intimate knowledge of how the components interact

and exact details on the proper sequences of control.

Only a Complete Control dealer has the requisite experience and training

to quickly and effectively customize a remote control for true automated

operation.

Congratulations on your choice!

Front Cover Photo courtesy of Robert Ridenour of Connected Technologies,

www.connected-technologies.com

The information in this manual is copyright protected. No part of this manual may

be copied or reproduced in any form without prior written consent from Universal

Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,

TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.

The information in this manual may be subject to change without prior notice.

Complete Control is a registered trademark of Universal Remote Control, Inc.

Entertainment Made Simple is a trademark of Universal Remote Control, Inc.

All other brand or product names are trademarks or registered trademarks of their

respective companies or organizations.

Printed in Korea

Universal Remote Control, Inc.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

Introduction to the MX-810i 1

Optional RF “No Rules” Operation 2

Installing and Charging the Battery 3

Programming the MX-810i 4

Using the MX-810i to Manually Control a “Device” 5

Using the MX-810i to Automate an “Activity” 6

Using the Help System for Automated Activities 7

Accessing the MX-810i’s Setup Menus 7

Selecting from the Setup Menus 8

Setting the Color Screen 8

Setting the Button Lighting 9

System Menu 10

Setting the Button Beep Volume 11

Date and Time Menus 12

Erasing and Resetting 13

USA Limited Warranty Statement 13

Specifications 14

Your Programming Notes - Devices 15

Your Programming Notes - Activities 16

TABLE OFCONTENTS

MX-810i OWNERS MANUAL MX-810i OWNERS MANUAL

Page 2Page 1

Congratulations!

You’ve purchased a unique synthesis of hardware and software engineering,

the Complete Control MX-810i. The MX-810i achieves a magnificent combina-

tion of power and flexibility, simplifying and automating operation of even the

most complex system.

User Configurable Screen and Button Lighting

Abuilt in pick up sensor can be set to light the screen and/or the buttons

automatically. Additionally, a dedicated LIGHT button enables the user to

backlight the buttons if the pick up sensor is turned off.

Integrated Sound Signaling

The MX-810i incorporates a small speaker for beeps. Anytime you press a

button, the MX-810i signals that it has understood your command with a

beep sound.

Custom Labeled Buttons

When you pick up the MX-810i, it automatically lights up the color LCD

screen which labels the six buttons to either side of the screeen. These

button labels change based on what you are watching or listening to.

Thus, if you have selected Watch TV, you will see a list of buttons that

are useful to that activity, while if you select Watch DVD, the buttons

will control the DVD.

LIGHT Button

Press the Light button on the

side of the MX-810i to back-

light all of the buttons. Of

course, you could opt to set

the buttons to light automati-

cally via the pick up sensor.

Optional RF “No Rules” Operation

In combination with a Complete Control RF Base Station, the MX-810i can

control your system without being in line-of-sight of the equipment.

Either the MRF-350i or the MRF-260i RF base station is compatible with the

MX-810i. Both incorporate RF Addressing. RF Addressing gives you the abili-

ty to control equipment locations throughout your home, even if they are

concealed in other rooms or are behind closed doors.

3.The MRF-350i’s built-in Front Blaster sends commands to

com

onents in the same cabinet s

ace as the MRF-350i.

1.The MX-810i sends radio waves

in every direction, so you don’t

have to point the remote any-

more!

4. Self-adhesive “Flashers” affix to the

Infrared sensors on the front panels of your

components. The Flashers relay commands

to components out of sight of the MRF-350i’s

Front Blaster. The flashers plug in to the

MRF-350i’s rear flasher line outputs via their

10 foot cables. Uniquely, the MRF-350i can

also connect to components with rear panel

IR Inputs via its adjustable IR Line Outputs.

2.The RFX-250i RF Sensor can be freely

positioned for optimal reception.

MX-810i OWNERS MANUAL MX-810i OWNERS MANUAL

Page 3 Page 4

Installing and Charging the Battery

Open the battery cover by pressing

on the release clip and removing

the cover.

Note that the three contacts on the

battery must connect to the three

spring-loaded contacts in the MX-

810i. Angle the battery into the bat-

tery compartment, contacts first,

then gently fit the rear of the battery

into the compartment as well.

Replace the battery cover by insert-

ing the hinged end in first, then

snapping the cover back into place.

You can charge the Lithium Ion bat-

tery by simply plugging the includ-

ed charger into the base of the

remote as shown here.

The MX-810i can be used while

charging.

Programming the MX-810i

The MX-810i is programmed via a Windows PC equipped with a USB port

(programming cable included), using our proprietary software, MX-810i

Setup. You can download this software from our website:

www.universalremote.com

Basic setup takes only a few minutes with this software. However, to fully

automate an audio/video system the programmer must have a detailed

knowledge of each component and how the system is connected and

operated. We highly recommend that you use a professional audio/video

installer to program your MX-810i so you will be able to enjoy all the

benefits of the MX-810i as well as one touch operation via Activities.

If you do opt to do some programming on your own, fill out the NOTES at

the end of this manual before beginning. This will greatly speed the

process of programming.

MX-810i OWNERS MANUAL MX-810i OWNERS MANUAL

Using the MX-810i to Manually Control a “Device”

Press the MX-810i’s DEVICES

button to display all the devices

you can control with your MX-

810i.

Your MX-810i can control up to

24 devices. If you have more

than six devices, press either of

the page buttons to display the

other devices in your system.

When you find the device you

want to control, press the corre-

sponding button beside the

screen.

For example, if you press the

Sony VCR button on the screen

shown here, the MX-810i will

become a Sony VCR remote

control.

The MX-810i now displays the device you select-

ed at the top of the screen. Below the title, the

LCD displays the customized names of any

special features you need for the device.

All the hard buttons of the MX-810i

have now changed their func-

tions to operate your device.

Page 5

Using the MX-810i to Automate an “Activity”

You select Activities in the same way that you select Devices. Simply press

the MX-810i’s ACTIVITIES button to display all the Activities you can auto-

mate with your MX-810i.

However, when

you select an activi-

ty, the MX-810i is

going to automati-

cally reconfigure

your entire Audio

Video system.

For example, if you press Watch

DVD, a whole sequence of events

happens:

Status Message

While the MX-810i is reconfiguring your

AV system, a status message on the MX-810i lets you

know that it is busy. This reconfiguration of your sys-

tem can take ten to twenty

seconds on some systems.

When the Status message disappears, all of the

MX-810i’s buttons and screens are optimized for

the activity you selected.

The Volume and Mute buttons control the

sound you hear.

The rest of the buttons on the remote have new

functions, so that the functions you need most

frequently are immediately available.

1. The TV turns ON.

2. The Audio system turns ON.

3. The DVD player turns ON.

4. The TV changes to the DVD

input.

5. The AUDIO system changes to the

DVD input.

6. The DVD player begins to PLAY.

Page 6

MX-810i OWNERS MANUAL MX-810i OWNERS MANUAL

Using the Help System for Automated Activities

After selecting an activity, if any of the devices or components don’t seem to

be on or are set incorrectly, use the Help button. There may be several help

screens to help you with your activity as shown here:

At the same time, press and

hold both the ACTIVITIES

button and the ENTER but-

ton. When the SETUP screen

appears, you can release the

two buttons.

Once the help screens appear, look at your system. If anything is off, use the buttons on the first screen to

power them on, then press NEXT (the PAGE button). The second and third screens enable you to correct an

input. Additional screens may appear if your system is custom. Exit help by pressing the HELP button again.

Accessing the MX-810i’s Setup Menus

The MX-810i has internal setup menus that enable you to change the settings

that control your color screen, the button lighting, battery warnings and the

clock. To access these settings, you must press and hold two

buttons at the same time as shown here:

Selecting from the Setup Menus

There are two pages of settings on the Setup Menu. Use the page buttons to

view them. To select, simply press the corresponding button.

Setting the Color Screen

Although usage of the color screen will affect how frequently you have to

charge the battery, the screen does not drain the battery as quickly as the

button lighting does.

Select the setting you’d like to adjust by pressing the

button beside the screen.

Use the Page button to see other pages.

Exit the Setup Menus by pressing the Activities or

Devices button, or simply waiting (the setup menus

time out in 30 seconds).

Adjust the brightness of the screen to taste. In most

lighting conditions, 50% gives good results.

The Pick Up sensor senses motion, so it will keep

the screen on (and drain your battery charge) as

long as you are holding it in your hand. If you turn

off the Pick Up sensor you will extend battery life

(the screen will still light up when you press any

button).

Adjust how long the screen stays lit after you put it

down or stop using it here.

Press the SAVE button to save your setting.

Setting Brightness

Use the buttons next to DIM and BRIGHT to adjust the brightness. You’ll

see the screen dim and brighten. When you have the right setting, press

SAVE. Pressing Cancel discards all changes.

Use the DIM and BRIGHT buttons to adjust the

lighting of the color screen.

Page 8Page 7

MX-810i OWNERS MANUAL MX-810i OWNERS MANUAL

Setting the Screen Pick Up Sensor

Use the buttons next to YES and NO. If you say YES, the color screen will

light as long as you are moving the MX-810i. If you say NO, the screen

will light when you press any button.

Setting the Screen Auto Turn Off

Use the buttons next to LESS and MORE to adjust the amount of time the

screen will stay lit when you stop moving it (Pick Up Sensor ON) or when

you stop pressing buttons (Pick Up Sensor OFF).

Setting the Button Lighting

Note that button backlighting uses more battery charge than the screen.

So if you would like to extend the time between charges, lower the usage

of button lighting.

Setting Button Lighting Automatic On

Use the buttons next to YES and NO. If you say YES, the buttons will light

whenever the LCD screen is on. If you say NO, the buttons will only light

when you press the LIGHT button.

Setting the Button Lighting Auto Turn Off

Use the buttons next to LESS and MORE to adjust the amount of time the

buttons will stay lit after you stop pressing buttons.

If you turn off Automatic On you will extend battery

life (the buttons will still light up when you press the

light button).

The buttons will stay lit for so many seconds after

you stop pressing buttons. Adjust to your preference

by pressing this button.

Select Power Remaining to check your power

remaining or to set a new battery warning level.

To view the system info, press here.

Use the YES and NO buttons to set the Pick Up sen-

sor.

Press the SAVE button to save your setting.

Use the LESS and MORE buttons to set the Auto Turn

Off timing.

Press the SAVE button to save your setting.

Use the YES and NO buttons to set the button back

lighting to automatically turn on or not.

Press the SAVE button to save your setting.

Use the LESS and MORE buttons to set the Auto Turn

Off timing.

Press the SAVE button to save your setting.

Page 10Page 9

System Menu

While you are using the MX-810i you can get a more accurate reading of

the exact power remaining by checking the System Menu. Additionally,

the System Info page offers a look at how much memory you have used.

MX-810i OWNERS MANUAL MX-810i OWNERS MANUAL

Page 11 Page 12

Date and Time Menus

Via the three menus for Date and Time you can set the date, set the time

and opt to display either the date or the time.

Setting Time

Tap the button beside hour or minutes then use the number keys to enter

the correct time. Set the AM/PM by toggling the button. When the time is

correct, press the SAVE button.

Setting Date

Tap the button beside day, month or year then use the number keys to

enter the correct date. When the date is correct, press the SAVE button.

Setting Display for Time or Date

The MX-810i can display either the time or the date, not both. Select what

you would like to be displayed and press SAVE.

Select either Time or Date display.

Press the SAVE button to save your setting.

Select the field you’d like to change, then use the

Number buttons on the MX-810i to enter the year,

the month and the day.

Press the SAVE button to save your setting.

Select the field you’d like to change, then use the

Number buttons on the MX-810i to enter hours or

minutes.

Press this button to change AM to PM or PM to AM.

Each press changes the setting. When it is correct,

press SAVE.

Press the SAVE button to save your setting.

Power Remaining and Battery Warning Settings

On this screen, you can see how much battery charge remains and you

can reset the “Low Battery” warning to either 10, 20 or 30 percent. The

battery indicator at the top left of the MX-810i screen will flash when

your low battery warning level is reached.

System Info

See how much memory you’ve used on this screen.

Setting the Button Beep Volume

Use the buttons next to OFF and LOUDEST to adjust how loud the beeps

are.

You cannot make any changes to the data displayed

on this screen. It is informational only.

Press the OK button to exit.

Use the OFF and LOUDEST buttons to set the Beep

volume.

Press the SAVE button to save your setting.

Use the LESS and MORE buttons to set the battery

warning.

Press the SAVE button to save your setting.

Note the current remaining battery charge here.

MX-810i OWNERS MANUAL MX-810i OWNERS MANUAL

Page 13 Page 14

Erasing and Resetting

You can erase your MX-810i (all of your work, all devices, all activities

will be lost) and reset it to the factory default configuration.

USA Limited Warranty Statement

Your Universal Remote Control, when delivered to you in new condition, is warranted

against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL,

INC. warrants this product against defects in material or workmanship for a period of one

(1) year and as set forth below. Universal Remote Control will, at its sole option, repair the

product using new or comparable rebuilt parts, or exchange the product for a comparable

new or rebuilt product. In the event of a defect, these are your exclusive remedies.

This Limited Warranty covers only the hardware components packaged with the Product. It

does not cover technical assistance for hardware or software usage and it does not cover

any software products whether or not contained in the Product; any such software is pro-

vided "AS IS" unless expressly provided for in any enclosed software Limited Warranty.

To obtain warranty service, you must deliver the product, freight prepaid, in its original

packaging or packaging affording adequate protection to Universal Remote Control at the

address provided in the Owner's Manual. It is your responsibility to backup any macro

programming, artwork, software or other materials that may have been programmed into

your unit. It is likely that such data, software, or other materials will be lost during service

and Universal Remote Control will not be responsible for any such damage or loss. A

dated purchase receipt, Bill of Sale, Installation Contract or other verifiable Proof of

Purchase is required. For product support and other important information visit Universal

Remote Control's website: http://www.UniversalRemoteControl.com or call the Universal

Remote Control Customer Service Center (914) 835-4484.

This Limited Warranty only covers product issues caused by defects in material or work-

manship during ordinary consumer use. It does not cover product issues caused by any

other reason, including but not limited to product issues due to commercial use, acts of

God, third-party installation, misuse, limitations of technology, or modification of or to any

part of the Universal Remote Control product. This Limited Warranty does not cover

Universal Remote Control products sold as USED, AS IS, REFURBISHED, so-called "B

STOCK" or consumables (such as batteries). This Limited Warranty is invalid if the factory-

applied serial number has been altered or removed from the product. This Limited

Warranty is valid only in the United States of America. This Limited Warranty specifically

excludes products sold by unauthorized resellers.

UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY

OR CONDITION ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW, THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNIVER-

SAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLE FOR STATEMENTS MADE

BY OTHERS CONCERNING THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE ON THIS PRODUCT. Some states or jurisdictions do not allow the exclusion or

limitation of incidental or consequential damages, or allow limitations on how long an

implied warranty lasts, so the above limitations or exclusions may not apply to you. This

Limited Warranty gives you specific legal rights and you may have other rights which vary

from state to state or jurisdiction to jurisdiction.

Specifications

Memory - 32 Megabits of Flash Memory Total (28 Megabits for User

Configuration)

Customization Capability - Up to 24 devices, 24 activities and up to 8

pages each for a total of 384 pages.

Learning Capability - Standard frequencies (15kHz to 460kHz)

Macro Capability - Up to 255 steps each

IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment

RF Range (radio frequency): 50 to 100 feet, depending upon the environment

RF Frequency: 433.92MHz

Weight: 6.9 ounces (with battery loaded)

Size: 8” H x 2.25” W x 1.25” D

Battery: Lithium Ion rechargeable battery included

Need assistance or have questions?

Our Customer Service Support Center is here to help.

Call (914) 835-4484 to speak with a customer service

representative or email us at [email protected]

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

www.universalremote.com

Use the CANCEL button to exit without erasing.

Press the ERASE button to erase all your work.

Inhaltsverzeichnis

Andere Universal Remote Control Fernbedienung Handbücher

Universal Remote Control

Universal Remote Control ORION MX-850 Bedienungsanleitung

Universal Remote Control

Universal Remote Control AVEX R6 Bedienungsanleitung

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8780L Bedienungsanleitung

Universal Remote Control

Universal Remote Control UR4-DCT Bedienungsanleitung

Universal Remote Control

Universal Remote Control ONE FOR ALL 3050CODES Bedienungsanleitung

Universal Remote Control

Universal Remote Control UR2-DTA Bedienungsanleitung

Universal Remote Control

Universal Remote Control MX-1200 Bedienungsanleitung

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Bedienungsanleitung

Universal Remote Control

Universal Remote Control R2-Mini Bedienungsanleitung

Universal Remote Control

Universal Remote Control MX-980 Bedienungsanleitung

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Bedienungsanleitung

Universal Remote Control

Universal Remote Control Easy Clicker UR2-211 Bedienungsanleitung

Universal Remote Control

Universal Remote Control UR5L-9000L Bedienungsanleitung

Universal Remote Control

Universal Remote Control CABLEVISION UR2-CBL-CV04 Bedienungsanleitung

Universal Remote Control

Universal Remote Control AVEX Bedienungsanleitung

Universal Remote Control

Universal Remote Control ZC800 Bedienungsanleitung

Universal Remote Control

Universal Remote Control HomeSet R200 Bedienungsanleitung

Universal Remote Control

Universal Remote Control Easy Clicker UR3L-SR4 Bedienungsanleitung

Universal Remote Control

Universal Remote Control UR5U-8520L Bedienungsanleitung

Universal Remote Control

Universal Remote Control PHAZR-5 - SPECS SHEET Bedienungsanleitung

Universal Remote Control

Universal Remote Control CLIKR-5 UR5U-8700L Bedienungsanleitung

Universal Remote Control

Universal Remote Control UR5-8400 Bedienungsanleitung

Universal Remote Control

Universal Remote Control PHAZR-5 Bedienungsanleitung

Universal Remote Control

Universal Remote Control MX-6000 - Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung