Universal Remote Control OCE-0085A Bedienungsanleitung
Page 2
Congratulations!
Congratulations on purchasing Universal Remote
Control’s WR7 7-Component Pre--Programmed
and Learning remote control. You now have the
power to control your entire home entertainment
system with one easy--to--use remote. The WR7can
be used with thousands of audio/video compo-
nents because of the extensive library of codes that
have already been programmed into the remote.
So... get ready to sit back, relax, and simplify your
home entertainment experience.
This Owner’s Manual is designed to assist you in
programming your WR7 remote to work with your
components by guiding you through an easy step-
by-step process. Everything you need to know
about programming the WR7 is contained in this
Manual.
WR7 Owner’s Manual©2008 Universal Remote
Control, Inc.
This document is protected by the copyright laws
of the United States and internationally by the
Berne Convention. No part of this manual may be
reproduced in any form without the express written
consent of Universal Remote Control, Inc. Although
reasonable care has been taken to assure the
accuracy of the information herein contained,
Universal Remote Control, Inc. is not responsible
for operational, technical or editorial errors or
omissions. The specifications and information in
this manual may be subject to change without
notice. MacroPower™ and SimpleSound™ are
trademarks of Universal Remote Control, Inc.
Entertainment Made Simple®is a registered trade-
mark of Universal Remote Control, Inc. All other
brand or product names are trademarks or regis-
tered trademarks of their respective owners.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
The Pioneer in Control Technology
Page 3
Table of Contents
Getting Started - Overview
• Control up to 7 Components ......5
• Activating Component Buttons ....5
• Learning Capability...................5
• AUX Function............................6
• Light Button...............................6
• Battery Installation.....................6
• Low Battery Warning.................6
• Couch Mode ............................6
Special Advanced Features
• MacroPower™ & Other
Macros ....................................7
• “My Favorites”- Favorite
Channels..................................7
• SimpleSound™ & Other
“Punch Throughs”......................7
Keypad Layout & Button
Functions ........................8
Programming WR7 Using
Pre-Programmed Codes.....9
• Quick Set-Up Method............9-10
• Three-Digit Code Entry
Method .............................11-13
• Auto-Search Method ...........14-15
Programming WR7 Using
the Learning Method ..16-18
AUX Function: Programming
a 7th Component............19
Finding a Component’s
Set-Up Code Number ..19-20
Page 4
Programming Special
Advanced Features
• MacroPower™Total System
On/Off ..............................21-22
•“My Favorites”– Favorite
Channels............................23-24
• SimpleSound™Total System
Volume Control....................25-26
• Channel Control
“Punch Through”.......................27
• Transport Control
“Punch Through”.......................28
• OSD (On-Screen Display)
Control “Punch Through”............29
Erasing Commands -
Overview......................30
• Erasing a Single Learned
Command ...............................30
• Erasing All Learned Commands
from One Component...............31
• Erasing MacroPower & Other
Macro Commands ...................32
• Erasing SimpleSound & Other
“Punch Through”Commands......33
• Factory Reset ...........................34
Pre-Programmed Code
Tables ..........................35
• AUDIO ..................................36
• CD ........................................37
• VCR/DVR...............................38
• AUX ......................................39
• TV ....................................40-41
• DVD ......................................42
• CABLE/SAT ............................43
FAQs ............................44
Warranty ......................45
Specifications ................45
Page 5
Getting Started -
Overview
Control up to 7 Components
The WR7 remote control is designed to
control up to seven different Audio/Video
components and operate virtually all
brands of AUDIO, TV, DVD, VCR/DVR,
CD, SAT/CABLE and AUX (Light, Music
Server, etc.) components.
Activating Component Buttons
Once you have programmed the WR7
for all of your components, all you need
to do is press a component button and
all the buttons on the WR7 will work with
that component. For example, when you
press the TV component button, all the
buttons on your WR7 will operate your
TV. If you press the DVD component but-
ton, all the buttons on the WR7 will oper-
ate your DVD.
Each time you press any of the buttons
on the remote, the LED light in the com-
ponent button will light up to indicate
which component you are controlling.
Learning Capability
The WR7 has the ability to “learn”functions
from the original remote controls of other
manufacturers, even if they are not in the
Pre-programmed database.
TV BUTTON
Page 6
AUX Function
The AUX (Auxillary) button is designed to
operate a 7th audio/video component that
you may have in your system… such as a
TIVO, a second VCR or DVD, or an addi-
tional audio component.
Light Button
The WR7 features a fully backlit keypad for
ease of use in low light or darkened viewing
conditions. Press the LIGHT button to back-
light all the keypad buttons. Press again to
turn off (or simply wait 10 seconds for auto-
matic shut-off).
Battery Installation
Press the tab and remove the cover of the
battery compartment located in the back of
your remote. Insert the two AA Alkaline bat-
teries (included in the package) making sure
to match the positive (+) and negative (- )
symbols as shown in the diagram. Place the
cover back over the battery compartment.
Low Battery Warning
When the batteries are low and need to be
replaced the component LED will quickly
blink three times when you press the
POWER [ON] button.
Couch Mode
The WR7 is designed to automatically turn
itself off if a button is pressed for more than
30 seconds. This prevents battery power
from being depleted should the remote acci-
dentally slip between the couch cushions.
INSERT BATTERIES
CORRECTLY
Page 7
Special Advanced
Features
The WR7 also offers the following special
advanced features that can offer you many
time-saving conveniences:
MacroPower™& Other Macro
Buttons
MacroPower is a unique feature that enables
you to turn all your components ON or OFF, all
at the same time, simply with the press of one
button. The WR7 has 13 Macro buttons that
are designed to store up to 20 commands in
each button. Pressing any one of the Macro
buttons will send out the series of commands
that are stored in that button.
“My Favorites”
(Favorite Channels)
This is one of the most desirable features of the
WR7 remote control. Once it’s set up, you can
select one of four favorite channels with the
press of one button – without the need to type
in a channel number. So, whether it’s CNN or
the Food Network, your favorite viewing spot is
just one click away.
SimpleSound™& Other “Punch
Throughs”
SimpleSound Volume Control is a dynamic fea-
ture that gives you total volume control over all
the components in your system, even those that
do not have their own built--in volume control,
such as TIVO, DVD and VCR... saving you the
hassle and inconvenience of constantly needing
to switch between component modes on the
remote. As an example, in order to increase the
volume while watching a DVD, you would typi-
cally have to pick up the TV remote control to
increase the volume. With the WR7, you do
not even have to press the TV component but-
ton. Once you program SimpleSound in your
DVD mode, you will automatically have TV vol-
ume control in DVD mode.
SimpleSound is what is called a “Punch
Through”feature and is not limited to volume
control. It can also be applied to Channel
Control, Transport Control, and OSD Control.
Page 8
Keypad Layout &
Button Functions
Allows you to turn the selected
component on and off.
ON
Designed to send Power On/Off
commands for up to seven com-
ponents with one button press.
Designed to send
Power On/Off
commands for
up to seven com-
ponents with one
button press.
SYSTEM OFF
FAVORITE
Used to select the com-
ponent you want to
operate and signals
remote control activity.
Selects highlighted
screen options.
Selects the video
source from avail-
able components.
Returns to the previous-
ly tuned channel
through the SAT/Cable
Set Top Box.
INPUT
Raises or lowers the
sound volume.
VOLUME
Displays the Program
Guide Listings provided
by the Cable or Satellite
Service Provider.
GUIDE
AUD, CD, VCR, AUX,
TV, DVD,SAT/CABLE
PREVIOUS
CHANNEL
Displays the
Applications Menu
through the Cable
Set Top Box.
MENU
Used for program-
ming steps and on-
screen navigation
and highlighting.
CURSOR NAVI-
GATION PAD
Perform standard
VCR and DVD func-
tions when in VCR
and DVD mode, or
VOD (Video-On-
Demand) and DVR
(Digital Video
Recorder) functions
when in Cable mode.
TRANSPORT
CONTROLS
Custom-programmable
Favorite Channel Buttons
MY
FAVORITES
CHANNEL
Silences the Audio.
Press to activate. Press
again to restore sound
to the previous level.
Selects the next
higher or lower
channel.
MUTE
Use to enter code num-
bers for programming
components and to enter
channel numbers to tune
in channels. Also used to
make numeric entries
on on-screen menus. The
alpha labels on the keys refer
to Audio component functions
that can be accessed with the
respective keys.
NUMBER
PAD
Skip forward or
backward a
whole day in the
Program Guide.
SKIP-/+
Displays information
about the program
currently playing or
highlighted in the
Program Guide (see
GUIDE).
INFO
Exits from current
screen.
EXIT
SELECT
Press to back-light all keypad buttons.
Press again to shut off (or simply wait 10
seconds for automatic shut-off).
LIGHT BUTTON
Page 9
Programming WR7 using
Pre-Programmed Codes
There are three ways you can program your
WR7 using the component brand codes that
are pre-programmed into the remote.
• Quick Set-Up Method
• Three-Digit Code Entry Method
• Auto--Search Method
The Quick Set-Up Method is a unique new fea-
ture that enables the fastest and easiest set-up
by using one-digit codes for up to 10 major
brands for each component. The Three-digit
Code Entry Method allows you to set-up the
WR7 using 3-digit codes for component brand
names. It is also a fast and easy way to pro-
gram the remote. The Auto-Search Method
scans through all the brands in the remote con-
trol, one at a time. It should be used when
either the Quick Set-Up or Three-Digit Code
Entry Methods do not work.
* * *
Quick Set-Up Method
STEP 1: Manually or using your old
remote, turn on the component you want to
program—for example, to program your TV,
turn on your TV set.
STEP 2: Point the WR7 toward the compo-
nent that you want to program (in this case
the TV set) and press and hold the compo-
nent button (in this case the TV button).
While holding down the compo-
nent button, begin to press numeric
keys, one number at a time, starting from 1,
continuing to 2, 3…0 until the component
(in this case the TV) turns off.
Page 10
STEP 3: Release the component button to
save the code. The component LED light will
blink three times to confirm that the code has
been stored.
Repeat the above steps for other components.
COMPONENT
BUTTONS
NUMBER
PAD
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Universal Remote Control Universalfernbedienung Handbücher
Universal Remote Control
Universal Remote Control UR4-DSR Bedienungsanleitung
Universal Remote Control
Universal Remote Control Complete Control MX-780 Bedienungsanleitung
Universal Remote Control
Universal Remote Control UR5-8400A Bedienungsanleitung
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8700 Bedienungsanleitung
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8700L Bedienungsanleitung
Universal Remote Control
Universal Remote Control Osiris MX-3500 Bedienungsanleitung
Universal Remote Control
Universal Remote Control COMPLETE CONTROL MX-450 Bedienungsanleitung
Universal Remote Control
Universal Remote Control PHAZR -5 UR5U-9000L Bedienungsanleitung
Universal Remote Control
Universal Remote Control UR-S86TVE Bedienungsanleitung
Universal Remote Control
Universal Remote Control MRF-300/RFX150 Bedienungsanleitung
Universal Remote Control
Universal Remote Control 4 Function DTV Remote Control Bedienungsanleitung
Universal Remote Control
Universal Remote Control Atlas M1055 Bedienungsanleitung
Universal Remote Control
Universal Remote Control UR3-J22TWM Administratorhandbuch
Universal Remote Control
Universal Remote Control Easy Clicker UR3-SR3 Bedienungsanleitung
Universal Remote Control
Universal Remote Control Complete Control MX-810 Bedienungsanleitung
Universal Remote Control
Universal Remote Control Complete Control MRF-260 Bedienungsanleitung
Universal Remote Control
Universal Remote Control Easy Clicker OCE-0009D Bedienungsanleitung
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8700L-IP Bedienungsanleitung
Universal Remote Control
Universal Remote Control Unifier URC-100 Bedienungsanleitung
Universal Remote Control
Universal Remote Control UR4-DSR Bedienungsanleitung
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8500 Bedienungsanleitung
Universal Remote Control
Universal Remote Control MX-900 Betriebsanleitung
Universal Remote Control
Universal Remote Control COMPLETE CONTROL MX-880Z Bedienungsanleitung
Universal Remote Control
Universal Remote Control Customizer URC-300 Bedienungsanleitung
