UNIVIEW MS8500-E Bedienungsanleitung

MS8500-E

Media Switch Server

Quick Guide

Manual Version: V1.02

Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate

to contact the dealer.

Notice

The contents of this document are subject to change without prior notice. Updates will be

added to the new version of this manual. We will readily improve or update the products or

procedures described in the manual.

Best effort has been made to verify the integrity and correctness of the contents in this

document, but no statement, information, or recommendation in this manual shall constitute

formal guarantee of any kind, expressed or implied. We shall not be held responsible for any

technical or typographical errors in this manual.

The product appearance shown in this manual is for reference only and may be different from

the actual appearance of your device.

Due to uncertainties such as physical environment, discrepancy may exist between the actual

values and reference values provided in this manual. The ultimate right to interpretation resides

in our company.

Use of this document and the subsequent results shall be entirely on the user’s own

responsibility.

Environmental Protection

This product has been designed to comply with the environmental protection requirements. The

storage, use, and disposal of this product must meet the applicable national laws and regulations.

Preface

Audience

This manual is intended for:

Surveillance system planners

Field technical support and servicing engineers

Software installation, configuration, and servicing administrators

Product users

Conventions

Document Conventions

Convention

Description

Boldface font

Commands, keywords, parameters and GUI elements such as window, tab,

dialog box, menu, button, etc.

Convention

Description

Italic font

Variables for which you supply values.

Separate a series of menu items, for example, Device Management > Add

Device.

Symbols

Symbol

Description

WARNING!

Contains important safety instructions and indicates situations that could

cause bodily injury.

CAUTION!

Means reader be careful and improper operations may cause damage or

malfunction to product.

NOTE!

Means useful or supplemental information about the use of product.

Safety and Compliance Information

Conventions Used Symbol

The symbols in this chapter are shown in the following table. They are used to remind the reader of

the safety precautions during equipment installation and maintenance.

Safety Symbol

Description

Generic alarm symbol: To suggest a general safety concern.

ESD protection symbol: To suggest electrostatic-sensitive equipment.

Electric shock symbol: To suggest a danger of high voltage.

Safety Information

WARNING!

Installation and removal of the unit and its accessories must be carried out by qualified personnel.

You must read all of the Safety Instructions supplied with your equipment before installation and

operation.

Warnings:

If the product does not work properly, please contact your dealer. (We shall not assume any

responsibility for problems caused by unauthorized repair or maintenance.)

To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.

This installation should be made by a qualified service person and should conform to all the

local codes.

Please install blackouts equipment into the power supply circuit for convenient supply

interruption.

The separate grounding terminal must be permanently connected to earth.

For AC supplied model: The plug-socket combination must be accessible at all times as it serves

as the main disconnecting device.

Before the power cable is installed or removed, the power must be turned off.

To avoid heat accumulation, good ventilation is required for a proper operating environment.

Improper use or replacement of the battery may result in hazard of explosion. Please use the

manufacturer recommended battery type.

Caution: Fiber optic ports –optical safety.

Never look at the transmit laser while the power is on. Never look directly at the fiber ports and

the fiber cable ends when they are powered on.

Caution: Use of controls or adjustments to the performance or procedures other than those

specified herein may result in hazardous laser emissions.

Regulatory Compliance

FCC Part 15

This equipment has been tested and found to comply with the limits for digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

LVD/EMC Directive

This product complies with the European Low Voltage Directive 2006/95/EC and EMC Directive

2004/108/EC.

WEEE Directive–2002/96/EC

The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE)

Directive and must be disposed of in a responsible manner.

Contents

1 Product Introduction························································································································ 1

Appearance················································································································································ 1

Ports and Buttons ······································································································································ 2

LEDs and Segment Displays ······················································································································· 4

Technical Specifications ····························································································································· 6

Factory Default Settings for Network Parameters····················································································· 7

2 Hardware Installation······················································································································· 8

Installation Procedure································································································································ 8

Check Before Installation··························································································································· 9

Removing the Front Panel ························································································································· 9

Installing the Device in a 19-inch Cabinet································································································ 10

Check Before Installation ·················································································································10

Installation Procedure ······················································································································ 10

Installing the Device on a Workbench ·····································································································13

Installing the Hard Disks ··························································································································14

Check Before Installation ·················································································································14

Installation Procedure ······················································································································ 14

Installing the Front Panel························································································································· 15

Installing the Extended Network Interface Card (Optional) ····································································15

Connecting Cables···································································································································· 16

Connecting the RS-232 Cable ··········································································································· 16

Connecting the Grounding Cable ····································································································· 17

Connecting the Power Cable ············································································································19

3 Power On/Off ·································································································································20

4 Basic Configuration ························································································································ 21

Configuration Tasks··································································································································21

Logging In to the Web Interface ·············································································································· 21

Configuration Through the Command Line Interface·············································································· 22

Logging In to the Server Through the SSH Client ············································································· 22

Viewing and Modifying Parameter Settings·····················································································23

Performing Service Operations ········································································································24

Viewing the System Version············································································································· 24

5 Software Upgrade, Uninstallation and Reinstallation ··································································· 25

Preparation ··············································································································································25

Software Upgrade····································································································································25

Copying and Extracting the Software Package················································································· 25

Running the Upgrade Script ·············································································································26

Software Uninstallation ··························································································································· 26

Software Reinstallation····························································································································26

6 FAQs ··············································································································································· 27

How to Replace a Hard Disk·····················································································································27

Check Before Installation ·················································································································27

Installation Procedure ······················································································································ 27

1 Product Introduction

The Media Switching server (referred to as MS server or device in this manual) is a

hardware/software server oriented toward IP-based video surveillance systems. The device uses the

Media Switch (MS) software.

Appearance

The actual appearance may vary depending on your device model.

Figure 1-1 Front view

Figure 1-2 Rear view

Ports and Buttons

Figure 1-3 Ports and buttons on the rear panel

1: AC input (for PSU 0)

2: Power (for PSU 1)

3: Network Interface Card (NIC) slot

4: VGA video output

5: HDMI video output

6: USB (4)

7: Serial port 1 (RS-232)

8: Serial port 2 (RS-232)/Serial port 3 (RS-485)

9: GE port 1

10: GE port 2

11: FE port

12: Power on/off button

13: Reset button

14: Grounding terminal

For detailed descriptions of the ports and buttons, refer to Table 1-1.

Table 1-1 Port and button descriptions

Port

Description

AC input

100 –240 V AC, 50 Hz/60 Hz

Extended power slot

Standard: 1 slot

Optional: 2 slots in 1+1 redundancy mode

Extended NIC slot

Two options:

NIC with 4 GE ports (RJ-45)

NIC with 2 10GE ports (SFP+)

3 4 5 6 7

11 12 13 14

Port

Description

VGA output

For connection to a VGA display device.

Supported resolutions and screen refresh rates:

1920 1080, 50P

1920 1080, 60P

1280 720, 50P

1280 720, 60P

1280 1024, 60 HZ

1024 768, 60 HZ

HDMI video output

For connection to an HDMI display device.

Supported resolutions and screen refresh rates:

1920 1080, 50P

1920 1080, 60P

1280 720, 50P

1280 720, 60P

1280 1024, 60 HZ

1024 768, 60 HZ

USBs

For connection to a USB device.

Serial port 1 (RS-232)

RJ-45 port for debugging and maintenance purposes.

Serial port 2

(RS-485/RS-232)

RJ-45 port compatible with RS-485 and RS-232 ports.

GE port

10/100/1000 Mbit/s adaptive Ethernet port for connection to a service

network.

FE port

10/100 Mbit/s adaptive Ethernet port for connection to a PC.

Power on/off

Pressing and holding this button for 3 seconds to power off the device.

However, this is not a recommended method to power off the device.

Reset button

Pressing this button quickly once the device restarts.

Grounding terminal

For connection to the grounding cable of the device.

Andere Handbücher für MS8500-E

Inhaltsverzeichnis

Andere UNIVIEW Schalten Handbücher

UNIVIEW

UNIVIEW MS8500-E Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung