Unnecto MAXX Bedienungsanleitung

User Manual

Dear Customer,

Thank you for purchasing Mobile phone. Kindly read this user manual carefully to learn about key

functional characteristics and operational methods of this mobile phone.

Contents

I Safety and precautions……………………………....……………………...3

II Cell phone outline………………………………....………………….…......4

III Getting Started……………………………………………….……….....….4

IV Description of cell phone……………………....……………….……....….8

V Basic operation of cell phone…………………........…………….….……10

VI Operation of menu functions............................................………............12

VII Operating instructions of English editor.…………....………...............…27

VIII Application of USB storage function……………………........…..…..…..28

Precautions before using…………………………………….....……..…28

IX My Sync…………………………………………………………………….28

X Appendix…………………………………………………………...…........29

Troubleshooting…………………………………………………….………29

I. Safety and Precautions:

To use your phone safely and effectively, please read the following information before use:

•Please turn off your phone when you are near a chemical plant, a gas station, an oil depot o

other explosives.

•To ensure safety, please use earphone during driving; Otherwise, unless emergency, make

call after parking your car by the roadside. DO NOT use the phone during driving at high speed.

•Do not use your cell phone while in a plane. Please check whether Auto Power On is set or no

before boarding.

•Do not use your cell phone in a hospital to avoid interference with the normal operation o

medical equipment which may result in a medical accident. If the cell phone is used near a

pacemaker, audiphones and some medical electronic equipment, you should pay special attention

that the cell phone may interfere with these devices.

•Auxiliaries and accessories not provided by us are excluded from the guarantee.

•Do not dismantle your cell phone by yourself. In case of a failure, please contact the service

station specified by us. Only qualified personnel may install or repair this product.

•The phone should be charged in the environment which is well-ventilated, and should be kept

away from inflammable substances and explosives.

•To avoid demagnetization, please keep your phone away from magnetic substances, such as

magnetic disk, credit card, etc.

•Please be sure the phone isn't exposed to any liquid. In Case this situation occurs, please

remove the battery and contact the service station specified by us.

•Please use your phone in the environment which is neither too hot nor too cold, do not expose you

phone in strong sunlight and in high-humidity environment.

•Do not use liquid or wet cloth with strong detergent to clean your phone.

•All wireless devices may be susceptible to interference, which could affect performance.

•Your cell phone has photo and record functions, please use these functions following the

related laws and regulations. You may violate the laws and regulations if you take photos an

record without authorization.

•Do not throw, drop or hit the cell phone during use to avoid damage to the housing or the elements

inside the phone.

•Do not dispose the worn battery as common domestic rubbish. Please dispose the worn battery

according to the specified instructions where the disposal of a worn battery is clearly specified.

Note: The Company won't undertake any responsibility for any consequences caused by failure to

observe the above-mentioned suggestions or improper applications.

If any content described in this manual goes against that of your cell phone, it is subject to the real

cell phone.

MAXX operates a policy of continuous development. MAXX reserves the right to make

changes and improvements to any of the products described in this document without prior

notice.

The availability of particular products may vary by region. Please check with the MAXX dealer

nearest to you.

II. Cell Phone Outline:

The following is the view of the phone:

III. Getting Started:

Installation of the SIM card:

Dual-SIM operation allows the use of two services without the need to carry two phones at the

same time. For example, the same handset can be used for business and private use with separate

numbers and bills; or for travel.

With these two SIM cards, you can use various functions of the MAXX phone. Many parameters

required for communications are stored in the SIM cards. Personal data, including the PIN

(personal identification number) phonebook, SMS and other extra system services can also be

stored in the SIM cards.

Warning: DO NOT twist or scratch the SIM card and expose it to static electricity, dust or wate

If you lose your SIM card, please contact your network operator for help.

To install your SIM cards, please turn off your MAXX phone first, remove the back cover, an

insert the SIM cards into the SIM card slots at the back of the phone.

Note: The SIM card is a small object; please keep the card out of the reach of children to avoid

swallowing the card by accident. Do not touch the metal surface of the SIM card and keep i

away from electromagnetism to avoid loss and damage of the data. You will not be able to

connect to the network if the SIM card is damaged.

Precaution: Your MAXX phone supports a memory card with capacity up to 4GB.

Installation of battery:

Please use the original-packaging battery and accessories. Store the battery well if it is not used.

Note: Please follow the correct procedures as shown in the figure to prevent damage to the battery

contact points.

Charge the battery:

The new battery must be fully charged and discharged for several times to reach its best

performance. Charge as soon as possible when the power is used up as over-discharge will damage

your battery. Do not charge your phone without battery. Please turn off your phone before removing

the battery; otherwise, the phone memory may be damaged.

Disconnect the charger and the power supply and then disconnect the MAXX phone when

the battery is fully charged. Connect your MAXX phone to the charger as per the figure.

While charging, if the phone is switched on, the power quantity icon at the top right corner of the

screen will twinkle and will stop twinkling when the battery is fully charged, if the phone is switched

off, an icon will appear at the screen to show the battery is in charging mode.

Note: A little heating while charging is normal.

Use of battery:

The performance of the battery is affected by multiple factors such as your wireless loading network

configuration, signal intensity and temperature when using the phone, the function or settings you

selected, the accessories adopted for cell phone and other applied program modes.

To optimize the performance of the battery, please do as follows:

•New battery or a battery left unused for a long duration should be charged for a long time.

•Keep the temperature at room temperature when charging.

•The battery may require longer time to be fully charged after being used for a long time and this

is normal. If the call time becomes too short, you may need to buy a new battery produced by

our company or authorized by our company. Faulty

attery or accessories may damage you

MAXX phone and even cause danger.

•If the battery is left unused for a long time or the power is too low, it may require longer time

for the charging interface to appear, please wait patiently.

Note: 1. for the safety of our environment, please do not throw away the battery everywhere.

2. When the capacity of battery is too low, the phone will give an alarm as “Battery low”.

The phone should be charged in time.

Warning: Explosion, fire or injury may be caused by any type of battery short-circuit.

PIN:

PIN1 code: Personal identification code is used to enter SIM card and to prevent others to use the

SIM card without your permission. If PIN1 code safeguard function of your cell phone has already

een started, the system will display “Enter SIM card 1/2 PIN” to enter when switching on the

phone. * will be displayed instead of the PIN1 you entered. You can get PIN1 from your networ

operator together with the SIM card.

PIN2: The personal identification number used for special functions such as charging function

provided by the network.

PUK and PUK2 (8 digits)

A PUK is required to change the PIN. To change the PIN2, you need to use PUK2. If PUK is no

provided together with the SIM card, please ask for it from your network operator.

Warning: If the PIN code is entered continuously three times, the SIM card will be locked in.

Please consult the network operator immediately to look for deciphering. Unauthorize

deciphering may cause permanent failure to the SIM card.

IV. Description of Cell Phone:

Dialing key:

Make or answer calls.

Short pressing the dialing key would enable to enter call log under standby status.

Hang-up key & on/off key:

Hang-up or reject a call.

Long press the key to switch off the phone under standby status.

Long press the key to switch on the phone when the phone is switched off.

Direction keys:

Move the bar or cursor.

Enter appointed shortcut under standby status.

OK Key:

Confirm an operation in menus.

Number keys:

Input numbers or characters.

Long press the number keys 1to 9 to quick-dial while standby.

Long press the # key to switched to silent and quit silent mode under standby status.

Short press the * key repeatedly or long press it to enter “P”, “+” or “W” characters unde

dialing interface.

Icons on screen in standby status:

SIM 1 Antenna

SIM 2 Antenna

Alarm clock activated

SIM 1 SMS

SIM 2 SMS

SIM 1 MMS

SIM 2 MMS

Battery

Ringing

Vibrate then ring

Ring then vibrate

Vibration

Missed calls in SIM 1

Missed calls in SIM 2

Keypad locked

SIM 1GPRS

SIM 2GPRS

Bluetooth

Call divert activated in SIM1

Call divert activated in SIM2

Languages & Input Methods:

English and Hindi input method is provided in your phone. For details, please refer to chapters

related to English editing, where you can learn different input methods and how to switch

between them.

Incoming Call alert method:

The built-in vibrating motor and buzzer in your phone provides the following alerting modes:

Ring Only

Vibrate Only

Vibrate and ring

Vibrate then ring

Description for making calls:

•Making a national call:

The simplest way to make a domestic call is to input a phone number by numeric keys an

press the dialing key. If called by SIM card 1, the screen will display “SIM Card 1 Dialing”,

and if called by SIM card 2, the screen will display “SIM Card 2 Dialing”.

Call status will be displayed on the screen when the call is answered.

Press the hang-up key to end the call.

Make domestic calls: zone number + phone number + dialing key.

•Making an international call:

To make an international call, long press or repeatedly short press the * key until the symbol

“+” is displayed on the screen. This allows you to make an international call without

knowing the prefix number of that country (e.g. India is +91).

Then input the country code and the complete phone number. The country code is subject to

convention, e.g. Germany is 49, Britain is 44 and Sweden is 46, etc.

Make international calls: + country code + complete phone number + dialing key

•Call extension of a fixed phone:

Extensions of some fixed phones are not accessible directly, in such case, you need to dial the

host number and then the extension number. Simply insert the letter “P” between the hos

number and the extension number and you can call the extension. You can input a “P” by

long pressing or repeatedly short pressing the * key.

Call extension of a fixed phone: phone number + P + extension number + dialing key.

•Make emergency calls:

In any country where digital GSM is used, you can make an emergency call if your phone is

covered by the network (you can know about this by checking the signal strength indicato

bar at the upper corner of the display of the cell phone). If your network operator does no

rovide roaming service in that area, the screen will display "EMERGENCY CALLS

ONLY", telling you that you can make this kind of call only. If you are in the coverage of the

network, you can make emergency calls even if your SIM card is not inserted in the mobile.

* In some areas, the 112 (emergency call) services are provided by the network operator. I

there is anything abnormal, contact your network operator.

•IMEI:

International Mobile Equipment Identity. You can see the bar code label printed with this

number at the back of the cell phone after you have turned off the cell phone and removed

the battery. This number is also stored in the cell phone, and can be displayed when you

enter "*#06#" on the screen dial interface.

V. Basic operation of cell phone:

Switch on:

Press and hold on “ON/OFF” to start up the cell phone. If no password settings are given for the

SIM card and cell phone, the phone will search for a network automatically, and when the cell

phone registers a network, the name of the network supplier will be shown on the screen. You can

now answer or make a call.

If the display indicates “Insert SIM card 1”or”Insert SIM card 2” after the start-up, please power of

your phone, and check whether your opposite SIM cards have been installed correctly or have been

installed or not.

After plugging into a SIM card, the phone will automatically check SIM card for availability, then

the display screen will indicate the following prompts in sequence:

1) “Enter phone lock password” ―― if you have started up the phone lock (default password:

“1234”)

2) “Enter SIM 1/2 PIN” ―― if you have started up the SIM card 1/2 lock.

3) “No service” ―― it represents the register network failure, and you cannot make a call at such

time.

4) “Emergency Call” ―― it allows to call 112.

5) “Search” ―― the phone is searching a network, until it finds out a suitable service network.

6) The screen displays the network operator name – it represents the network register success.

If only SIM 1 card is installed and the current mode is “SIM card 1 only”, the screen will display

the name of SIM card 1 provider only and that “SIM card 2 is off”; if only SIM card 2 is installed,

the screen will display vice versa. If only SIM card1 is installed and the current mode is “two cards

on”, the screen will display the name of SIM card 1 provider only and that “Please insert SIM card

2”; if only SIM card 2 is installed, the screen will display vice versa.

Switch off:

To shut down your MAXX phone, long press ON/OFF key, and after the screen displays the

power off animation, the cell phone will shut down. Please do not shut down the phone directly

by dismantling the battery, if done so, it is likely that you may damage the SIM card and may

lose some information.

Making a call:

•Enter the phone number in standby status, and press the calling key to call. If you want to

hang up or cancel the call, press the hang up/cancel key. When the phone is connected, yo

can see the holding time on the screen.

•Use the phonebook to make a call: Search the name/phone number saved in the phonebook,

and press the calling key to call.

•Redial the latest phone number: Press the calling key in standby status to search the latest list

of phone numbers or names. Roll over to the number or name of SIM 1/2, then

ress the

calling key.

Adjusting the receiver volume:

During a call, you can press the up or down direction key to adjust the receiver volume.

Answering a call:

When there is an incoming call, it will indicate in a mode of ring, vibration, vibrate and ring o

ring after vibration according to the setup of cell phone.

To answer a call, press the calling key.

To reject a call, press on/off key.

If you have applied for calling number identification service, the calling number will show on

the screen. If this number is already stored in the phonebook, the corresponding name of this

number will be shown on the screen.

If the call is to SIM card 1, “SIM 1 incoming” will be displayed in front of the number or name.

If the call is to SIM card 2, “SIM 2 incoming” will be displayed in front of the number or name.

Speed dial:

The phone provides 8 speed buttons, and you can define the phone numbers corresponding to

these buttons. So, as long as you long press [2 to 9] keys in standby status, you can call speedily;

[1] key is specially used for the speed dial of voice mailbox number.

Note: To speed dial, you have to press and hold on/press a key for 2 seconds and above, and i

you haven’t designated the speed dial function for that key, then you cannot be successful for the

call.

Sending DTMF signal:

When you have set up the DTMF signal sending function, if you press the digit key and * and #

key of the keypad during the period of conversation, it will be sent out in the form of DTMF

signal to the other party. If you do not start this function, you cannot carry out the extension

number calling or other similar functions properly.

Remark: The default of the function is switched on.

Call Hold:

If you have applied for the value added function of call waiting, the following function menu

may appear when you click an entry during conversation:

•Hold: Temporarily suspend the current conversation, but the conversation channel is still

under connection.

•End: End the current connection.

•New conversation: Enter the dial interface, and make another call.

•Phonebook: You can enter a phonebook directory.

•Messages: You can enter messages directory.

•Mute/resume: You can switch on/off microphone.

Dual-tone multi-frequency, DTMF: Can setup whether to send out a DTMF signal.

Note: Some menu entries just appear under the specific condition, or they need support from the

local network, such as: “Hold” and “New conversation”, etc., for detail, please consult the

network operator.

Non-response event:

When your MAXX phone has new unread messages, missed calls, or other events, the phone

will have the corresponding picture or icon prompt, please search these messages on time.

Connecting to voice mailbox:

Your MAXX phone allows you to divert the incoming call to the voice mailbox, then, you will

receive a notice concerning the voice messages (the center number of voice mailbox should be

set up properly in advance)

VI. Operation of menu functions:

Inhaltsverzeichnis

Andere Unnecto Handy Handbücher

Unnecto

Unnecto Quattro X Bedienungsanleitung

Unnecto

Unnecto PRIMO Bedienungsanleitung

Unnecto

Unnecto Primo 3G Bedienungsanleitung

Unnecto

Unnecto U-240-2 Bedienungsanleitung

Unnecto

Unnecto Air 5.5 Bedienungsanleitung

Unnecto

Unnecto U-240-2 Bedienungsanleitung

Unnecto

Unnecto Air 5.5 Bedienungsanleitung

Unnecto

Unnecto Air 5.0 Bedienungsanleitung

Unnecto

Unnecto U616 Bedienungsanleitung

Unnecto

Unnecto Drone XT Bedienungsanleitung

Unnecto

Unnecto Pebble Bedienungsanleitung

Unnecto

Unnecto U152 Bedienungsanleitung

Unnecto

Unnecto Neo V Bedienungsanleitung

Unnecto

Unnecto Drone X Bedienungsanleitung

Unnecto

Unnecto U617 Bedienungsanleitung

Unnecto

Unnecto U612 Quattro V Bedienungsanleitung

Unnecto

Unnecto Eco Bedienungsanleitung

Unnecto

Unnecto Curve Bedienungsanleitung

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung