Uplogix 500 Benutzerhandbuch

Startup Guide

for Local Managers

Version 5.1

January 2015

www.uplogix.com

Information in this document is subject to change without notice.

are trademarks of Uplogix, Inc. in the United States and other jurisdictions. All other marks

referenced are those of their respective owners.

Uplogix, Inc.

7600-B North Capital of Texas Highway

Suite 220

Austin, Texas 78731

USA

Contents

About this guide ..................................................................................................... 4

Target audience .................................................................................................................... 4

Typographical conventions ..................................................................................................... 4

Package Contents................................................................................................... 5

Unpacking the shipping box.................................................................................................... 5

Hardware Installation & Connections..................................................................... 6

Installing the Uplogix 500 ...................................................................................................... 6

Uplogix 500 ....................................................................................................................... 6

Making the connections required for initial configuration.......................................................... 6

Installing the Uplogix 5000 Local Manager................................................................................ 8

Uplogix 5000 ..................................................................................................................... 8

Making the connections required for initial configuration.......................................................... 9

Making the remaining connections ...................................................................................... 10

Quick setup .......................................................................................................... 12

Initial configuration using the keypad .................................................................................... 12

Initial configuration via console connection............................................................................. 14

Configuring the Local Manager for your LAN ........................................................................... 15

Configuring an optional Pulse server...................................................................................... 15

Configure communication with the Uplogix Control Center........................................................ 16

Configuring Power Control and Managed Device Ports.............................................................. 16

Out of Band .......................................................................................................... 18

Initial Connections .............................................................................................................. 18

Secondary Ethernet .......................................................................................................... 18

Embedded modems .......................................................................................................... 18

External modems ............................................................................................................. 18

Reference ............................................................................................................. 20

CLI Structure...................................................................................................................... 20

General Commands ............................................................................................................. 20

System Resource Commands................................................................................................ 20

Port Resource Commands .................................................................................................... 21

Modem Resource Commands ................................................................................................ 21

Power Control Resource Commands ...................................................................................... 21

Support and regulatory information ..................................................................... 23

Getting technical support ..................................................................................................... 23

Requesting an account ...................................................................................................... 23

Requesting support........................................................................................................... 23

Providing comments about this guide.................................................................................. 23

Startup Guide for Local Managers 4

About this guide

This guide describes the procedures for getting the Local Manager up and running in your

environment. More detailed instructions can be located in other guides located on the Uplogix

Support portal.

Information in this document is subject to change without notice. Please visit

support.uplogix.com for the latest updates to Uplogix product documents.

Target audience

This guide is for trained, qualified network support technicians responsible for installing and

maintaining the Local Manager.

Typographical conventions

The following conventions are used in this guide.

Sample text from the command line interface is presented in this font. Text that you enter is

presented in this font. For example:

[admin@UplogixLM]#show who

admin ssh Mar 22 13:38 (192.0.2.101)

Keyboard characters are enclosed in angle brackets. For example, press <Enter>.

Startup Guide for Local Managers 5

Package Contents

Unpacking the shipping box

Verify that you have received the following items:

Uplogix 500 Local Manager

Uplogix 5000 Local Manager

1 power supply and cord

1 mounting bracket

1 DB-9 to RJ-45 serial adaptor

Rack mounting bracket screws

Four clear rubber bumpers

2 US power cords (AC unit) or 2 Molex to

3-wire power cords (DC unit)

2 rack mounting brackets

1 DB-9 to RJ-45 adapter

Rack mounting bracket screws

Startup Guide for Local Managers 6

Hardware Installation & Connections

Installing the Uplogix 500

Uplogix 500

Making the connections required for initial configuration

To complete initial setup, you must connect the Local Manager to a power source.

Connecting power

The Local Manager uses an external power supply, which is shipped with the device.

Startup Guide for Local Managers 7

Caution: Use only the power supply shipped with the Local Manager 500. Using a different

power supply will void your warranty and may damage the equipment.

Connect the power supply to the DC connector on the back of the device.

Connect the power cord to the power supply. Use either the provided power cord or one that is

suitable for your location. The Local Manager uses a power cord with a standard IEC-320-C13

female cord end.

Connect the power cord to a power outlet. An amber light indicates that the unit has power

applied. Power on the unit by pressing the power button. The system status LED (denoted with

an ‘i’ label on the chassis) will blink while the Local Manager boots up and becomes a solid

green light when the boot sequence is complete.

Connecting a workstation

To complete initial setup, you must connect your workstation to the Local Manager's RJ-45

console port.

If your workstation has a DB-9 serial port, use the DB-9 to RJ-45 adaptor provided by

Uplogix (see diagram below) and a straight-through Ethernet cable to connect to the

console port.

If your workstation does not have a DB-9 serial port, you will need to use a USB to DB-9

serial adaptor together with a straight-through Ethernet cable and the DB-9 adaptor

provided by Uplogix to connect to the console port.

The default settings for the console port are 9600, 8, N, 1.

Note: The mini-USB console port will be supported in a future software release.

Startup Guide for Local Managers 8

Following initial setup, you may choose to disconnect the console cable and manage the Local

Manager via Ethernet.

Connecting management Ethernet

To manage the Local Manager and attached devices in-band through the network, connect

Gigabit Ethernet port 0 (GE-0) on the front panel to your network using a straight-through

Ethernet cable. Both GE-0 and GE-1 auto-negotiate their speed and duplex settings by default.

When connected, secondary management Ethernet port GE-1 acts as a standby redundant

Ethernet management connection by default. GE-1 will become active if the GE-0 link drops.

Therefore, it is important that GE-0 and GE-1 be connected to switch ports on the same

network or VLAN.

If your management network is fiber based, connect to the SFP in the option slot. If GE-0 or

GE-1 are connected to the network, they will take precedence over the fiber connection.

Installing the Uplogix 5000 Local Manager

Uplogix 5000

Startup Guide for Local Managers 9

Making the connections required for initial configuration

To complete initial setup, you must make this connect the Local Manager to a power source.

Connecting power

AC Models

Connect the power cord to the Local Manager. Use either the provided power cord or one that

is suitable for your location. The Local Manager uses a power cord with a standard IEC-320-

C13 female cord end.

Connect the power cord to a power outlet. A dimly lit keypad and dark display indicates that

the unit has power applied. Power on the unit by pressing the middle keypad button.

Note: Do not hold the middle keypad button down.

The display on the front panel will illuminate and display progress messages as the device

boots. At the end of the boot sequence, it displays the message Uplogix status good.

DC Model

Available on the Uplogix 5000 only. The DC Local Manager uses a power cord with a Molex

connector (part number: 39-01-4041) end and a three-wire split out.

Startup Guide for Local Managers 10

Caution: Use the provided power cables to have an electrician connect the Local

Manager to the DC power source

Connect the green yellow wire to earth ground, connect the brown wire to positive voltage and

then connect the blue wire to power return. A dimly lit keypad and dark display indicates that

the unit has power applied. Power on the unit by pressing the middle keypad button. The

display on the front panel will illuminate and display progress messages as the device boots.

At the end of the boot sequence, it displays the message Uplogix status good.

Description

Wire Color

Operating Voltage Range

(Referenced to Earth Ground)

Operating Voltage Range

(Referenced to Return)

Earth Ground

Green with

Yellow Stripe

0 V

Positive Voltage

Brown

0 –60 V

24 –60V

Return

Blue

-60 –0 V

Making the remaining connections

These connections are not required to complete the initial setup:

Connecting a power controller

Connect the power controller's serial port to port 1/6 on the Local Manager. A straight-through

Ethernet cable is typically used for this connection. However, some power controllers require

rolled or special cables. Consult your power controller documentation if a straight-through

Ethernet cable does not work.

Connecting management Ethernet

To manage the Local Manager and attached devices in-band through the network, connect

Gigabit Ethernet port 0 (GE-0) on the front panel to your network using a straight-through

Ethernet cable. Both GE-0 and GE-1 auto-negotiate their speed and duplex settings by default.

When connected, secondary management Ethernet port GE-1 acts as a standby redundant

Ethernet management connection by default. GE-1 will become active if the GE-0 link drops.

Therefore, it is important that GE-0 and GE-1 be connected to switch ports on the same

network or VLAN.

If your management network is fiber based, connect to the SFP in the option slot. If GE-0 or

GE-1 are connected to the network, they will take precedence over the fiber connection.

Andere Handbücher für 500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Uplogix Schalten Handbücher

Uplogix

Uplogix 500 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung