Page | 5
For wireless connecting to your home network:
a) Connect URAKU USB Wireless N-Adapter (or a compatible WIFI adapter) to one of the USB port.
b) Once connected, a short prompt will indicate the device is now connected with a USB WIFI adapter.
c) Go to “Setup” -> “Network” -> “Wireless Setup” After a brief scanning process, you should be
prompted with a list of wireless network in your area. Select the one you’d like to join.
d) If the wireless network is protected, you will then prompt to enter the security phrase.
2.4 CONNECTING TO A PC (REQUIRES HDD)
With a HDD installed, you can connect your S-120 to a computer and use it like any external USB
storage.
a) Make sure the player is powered on.
b) Plug in the USB 3.0 data cable to the rear data port on your S-120.
c) Connect the player to your desktop or Laptop computer’s USB port. For best performance, it is
recommended to use a USB 3.0 capable USB port on your computer.
d) Once connected, your operating system will automatically recognize your S-120 as an
external storage device. You can now manage the drive like any other external storage device.
2.5 CONNECTING A USB DEVICE
a) Make sure the player is powered on.
b) Plug in the USB pen drive, USB external HDD, USB Optical Drive etc. to any of the USB port
on the device.
c) Browse the contents of the device via file manager
2.6 CONNECTING A MEMORY CARD
a) Make sure the player is powered on.
b) Insert memory card into the built in memory card reader.
c) Browse the contents of the device via file manager.
3. POWER ON/OFF
3. POWER ON/ OFF
