URC MX-1200i Bedienungsanleitung
MX-1200i Color Touch Screen
Owner's Manual
MX-1200i COLOR TOUCH SCREEN
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
This remote control was Custom Programmed for you by:
For questions about your Custom Programming call:
Custom Programming of a complex home theater and/or a multi-room
system is one of the most challenging tasks within an audio/video
installation. It involves an intimate knowledge of how the components
interact and exact details on the proper sequences of control.
Only a Complete Control dealer has the requisite experience and training
to quickly and effectively customize a remote control for true automated
operation.
Congratulations on your choice!
MX-1200i Owner's Manual © 2012-2013 Universal Remote Control,
Inc.
The information in this owner’s manual is copyright protected. No part of this manual may
be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this owner’s manual may be subject to change without prior notice.
Complete Control is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations
MX-1200i COLOR TOUCH SCREEN
Congratulations! 1
Using the MX-1200i 2
Connecting the Battery Pack 3
Using the Charging Base 3
Displaying the Settings Screen 4
Sleep Settings 5
System 5
Brightness 5
Power 5
Button Light 6
Date and Time 6
Calibration 6
Pickup Settings 6
Sound 7
Factory Default 7
Exit 7
Maintaining Your MX-1200i 8
Specifications 8
Limited Warranty Statement 9
End User Agreement 11
Federal Communication Commission
Interference Statement 12
Regulatory Information to the user 13
Declaration of Conformity 14
Precautions and Information Concerning
Rechargeable Lithium-Ion Batteries 15
Page 1
MX-1200i COLOR TOUCH SCREEN
Congratulations
Thank you for purchasing the
Complete Control MX-1200i touch
screen universal remote control.
This remote can wirelessly control
your devices throughout the home
using an RF base station.
Controlling your home is simple
with the MX-1200i remote.
Brilliant 2.4" color touch screen with audible button presses
The MX-1200i has a programmable 2.4” color touch screen. When any
button is pressed, an audible response is heard and the color LCD
screen, as well as the remote buttons, will light up.
Fast setup of complex systems via Complete Control PC Program
To fully automate your audio/video system, the programmer must
have detailed knowledge of each component and how the system is
connected and operated. Only a trained and certified professional
audio/video installer can install an MX-1200i remote control in a
timely and efficient manner.
User interface customizable for any activity
Each button is customizable for activities such as Watch TV or
Listen to Radio. These activities can contain multiple commands
(macros) which enable a single button press to turn the needed
devices ON or OFF.
Ultra-reliable narrow band RF - compatible with URC 433.92 MHz
RF Base Stations.
The MX-1200i can communicate directly to RF base stations, such
as the MRF-350i and the MRF-260i. It also natively communicates to
URC Lighting via 433 MHz RF. This gives the MX-1200i the ability to
control your system without being in direct line-of-sight.
Interchangeable Buttons
The MX-1200i has two interchangeable "hard" buttons. Choose from
any of the supplied buttons to fill these spaces.
Page 2
MX-1200i COLOR TOUCH SCREEN
The 5-way cursor
enables you to
navigate through a
variety of on-screen
menus with ease.
The Main button
always displays
main menu pages.
The Page buttons
display additional
pages of controls.
The Volume and
Mute buttons are
always available
regardless of what
screen is displayed.
Using the MX-1200i
The MX-1200i's main pages display the activities and devices in your system.
Press the MAIN button to view your devices or the activities placed here by
your custom installation specialist. Large systems may have more than one
page. Press either of the PAGE buttons if you don't see all your devices.
Gently press any screen button with your finger to select an activity or a
device. The screen will change to display the buttons you need for that
activity/device. The PAGE buttons may reveal additional buttons for some
devices and activities.
When you would like to control another device, press the MAIN page
button and select a new device button.
Use the supplied
buttons to
interchange
these two
“hard” buttons.
MX-1200i COLOR TOUCH SCREEN
Connecting the Battery Pack
Unlock the rear cover by pressing down on the spring lock at the
top of the cover. Remove the cover. For shipment from the factory,
the battery is left out of the MX-1200i. Place the battery into the
battery compartment, making sure you align the contacts on the
battery to the contacts on the MX-1200i. The battery will snap into
place when aligned properly. Replace the cover and snap it into
place.
Using the Charging Base
Plug the 5V adapter into a power outlet and
into the back of the charging base.
Gently place the MX-1200i into the cradle of
the charging base. It automatically aligns itself
to the contacts on the charging base.
The Status light should immediately light. Red
indicates that it is charging. Blue shows that it
is fully charged. There is no harm in leaving
the MX-1200i on its charging base whenever
it is not in use.
Page 3
Red indicates charging, Blue that
the remote is fully charged.
Page 4
Displaying the Settings Screen
You can enter the Settings menu by pressing and holding the MAIN and
ENT button for three seconds. The MX-1200i will timeout after it is idle for
30 seconds and return to the previous setting or Main screen. There are
two pages of Settings screens. Select a setting by pressing a button on the
LCD screen. Press either of the PAGE buttons to access the other page. To
go back a step or to get out of the settings screen, press the MAIN button.
There are two pages of Settings screen. To access the other page press
either of the PAGE buttons.
MX-1200i COLOR TOUCH SCREEN
Page buttons reveal the
rest of the settings.
Page 2 of the Settings
Screen
Page 5
MX-1200i COLOR TOUCH SCREEN
Sleep Settings
Conserve energy by configuring the MX-1200i to
fall asleep after a specified amount of time. Select
an amount of time by adjusting the slide bar.
System
The System Information screen displays data about
your MX-1200i's operating system, memory etc.
Brightness
Adjust the screen brightness by moving the slider.
Min (minimum) is the dimmest setting and Max
(maximum) is the brightest setting.
Power
You can display the remaining charge by selecting
Power. You can also adjust when the low battery
warning screen will appear.
Page 6
MX-1200i COLOR TOUCH SCREEN
Button Light
You can adjust the brightness of the LEDs that
backlight the buttons of the MX-1200i. Move the
slider to the left to dim or move it to the right to
brighten the backlighting.
Date and Time
Your MX-1200i may have been programmed to
display the time or date on the touch screen.
If you need to, you can adjust the time displayed
by changing the settings on this screen.
Calibration
If you like, you can calibrate the screen by running
the calibration setting. You will need a pen top or
PDA stylus to do this. Do not attempt to calibrate
using your fingers.
Pickup Settings
You can set your MX-1200i to only turn on when
touched, or every time you move it. Adjust the
Pickup Sensor Level by sliding the bar to the
desired percentage.
MX-1200i COLOR TOUCH SCREEN
Page 7
Sound
You can adjust the button beep to Off or Loudest by
dragging the slider to your desired position.
Factory Default
WARNING! Only use this button when instructed
to by Technical Support. It resets the memory of
the MX-1200i to the factory condition. All your
programming will be lost!
Exit
When you have finished adjusting Settings, simply tap the Exit button to
return to normal operation.
Inhaltsverzeichnis
Andere URC Fernbedienung Handbücher
URC
URC UR2-DTA-RF4 Bedienungsanleitung
URC
URC TRC-1480 Bedienungsanleitung
URC
URC MX-HomePro MXHP-R500 Bedienungsanleitung
URC
URC MX-1200 Bedienungsanleitung
URC
URC MX-HomePro MXHP-R500 Bedienungsanleitung
URC
URC MX-890i Bedienungsanleitung
URC
URC TRC-1080 Bedienungsanleitung
URC
URC MX-450 Bedienungsanleitung
URC
URC Delta Senior Bedienungsanleitung
URC
URC HCM-R1 Bedienungsanleitung
URC
URC Complete Control MX-810 Bedienungsanleitung
URC
URC MX-450 Betriebsanleitung
URC
URC MXW-920 Bedienungsanleitung
URC
URC MX-890 Bedienungsanleitung
URC
URC MX-900 Bedienungsanleitung
URC
URC MX-890 Bedienungsanleitung
URC
URC R100 Bedienungsanleitung
URC
URC MX-780 Bedienungsanleitung
URC
URC Total Control TRC-1280 Bedienungsanleitung
URC
URC Complete Control MX-790 Bedienungsanleitung
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
