US Robotics 56K INTERNAL VOICE FAXMODEM - QUICK FOR WINDOWS REV... Bedienungsanleitung

U.S. Robotics 56K Internal Voice

Faxmodem

Quick Installation Guide for

Microsoft Windows® 95, 98, 2000, Me, XP

Operating Systems

English

Français

Italiano

Deutsch

Инструкции по установке см. вруководстве пользователя на установочном компакт-диске.

Kurulum talimatlarõiçin Kurulum CD-ROM'unda bulunan Kullanõm Kõlavuzu'na başvurun.

R24.0636.00

rev 1.2

Table of Contents

English ............................................................................1

Français.........................................................................15

Italiano......................................................................... 29

Deutsch........................................................................ 43

.....................................................................59

U.S. Robotics Corporation

935 National Parkway

Schaumburg, Illinois

60173-5157

USA

No part of this documentation may be reproduced in any form or by any means or used to make any

derivative work (such as a translation, transformation, or adaptation) without written permission from

U.S. Robotics Corporation. U.S. Robotics Corporation reserves the right to revise this documentation

and to make changes in the products and/or content of this document from time to time without obli-

gation to provide notification of such revision or change. U.S. Robotics Corporation provides this docu-

mentation without warranty of any kind, either implied or expressed, including, but not limited to,

implied warranties of merchantability and fitness for a particular purpose. If there is any software on

removable media described in this documentation, it is furnished under a license agreement included

with the product as a separate document, in the hard copy documentation, or on the removable media

in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, please con-

tact U.S. Robotics and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then this docu-

mentation and the software described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at private

expense. Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-

7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) and as such is provided with only

such rights as are provided in U.S. Robotics standard commercial license for the Software. Technical

data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-

14 (June 1987) whichever is applicable. You agree not to remove or deface any portion of any legend

provided on any licensed program or documentation contained in, or delivered to you in conjunction

with, this Quick Installation Guide.

logo are registered trademarks of U.S. Robotics Corporation. Other product names are for identifica-

tion purposes only and may be trademarks of their respective companies. Product specifications sub-

ject to change without notice.

English

Installation for All Operating Systems:

Before You Begin: Prepare for installation.

NOTE: Before you begin, we recommend you uninstall any other

modems you have in your system and unplug all telephone cords

connected to these modems. Refer to your previous modem's

documentation for instructions.

Write down your new USRobotics modem's serial number, which is located on

the white bar code sticker on the modem and on the modem's box, in the space

below. If you ever need to call our Technical Support department, you will need

this number plus your model number, which is 2884C, to receive assistance. If

you need to get assistance or download drivers from the Web site, you will need

your product ID number.

Product ID Number Serial Number

Step 1: Insert the modem into an empty PCI expansion slot.

Turn off and unplug your computer and all peripherals. Remove the computer’s

cover. (If you do not know how to do this, refer to your computer’s

documentation.)

WARNING: To avoid risk of electrical shock, make sure your computer

and all peripheral devices are turned off and unplugged from

electrical outlets and that any telephone cords have been removed

from existing modems and their wall jacks.

Remove the expansion slot cover at the back of an empty PCI expansion slot. PCI

slots are 3.5 inches long and are usually white plastic lined with metal. The slot

cover is on the back of the computer and covers an opening on the computer’s

case. Some slot covers are held in place with a screw. Insert the modem, gold

edge first, into the slot. You will need to press the modem in firmly so that it is

2884C

seated properly in its slot. When the modem is installed correctly, you will no

longer see any part of the gold edge. Be careful to place the modem in the slot

properly, with the end bracket of the modem lined up properly in your computer.

The modem’s metal bracket will cover the opening on the back of the computer.

If you removed a screw from the slot cover, secure the modem with the screw.

Replace the computer’s cover.

Plug one end of the phone cord into the jack on the modem labelled and

plug the other end into an analogue phone wall jack. If there is an adapter

included with your modem, attach that to the phone cord before inserting it into

the wall jack.

NOTE: You can also attach a microphone to the jack and a set of

speakers into the jack to use your modem with the optional voice

software. Alternately, you can attach a headset to these jacks.

Step 2: Install the modem drivers.

NOTE: If at any time during the installation you are prompted to select

the location of your installation drivers, the following is the correct

location on the Installation CD-ROM (assuming D: is your CD-ROM

drive).

Windows Me/98/95 drivers -- D:\

Windows XP/2000 drivers -- D:\Win2K_XP

NOTE: Windows XP/2000 users must be logged in using an account with

administrative privileges before attempting to install the modem

drivers. Windows XP home users have administrative privileges by

default.

Windows XP Users: Control Panel: Category View

Turn on your computer. Insert your Installation CD-ROM into your drive before

you log in or Windows opens. Windows will install the hardware with in-built

drivers. After it has finished, click Windows Start, Control Panel, Network and

Internet Connections. Click Phone and Modem Options. Enter the requested

dialing information; click OK. Select the Modems tab. Click Properties. Select the

Driver tab. Click Update Driver. Select Install from a list or specific location

(Advanced) and click Next. Select Don’t search. I will choose the driver to install

and click Next. Select Have Disk. Click Browse and select your CD-ROM drive.

Select Win2K_XP and select the driver most appropriate to your modem. Click

Next. A Digital Signature Not Found message may appear*. Click Continue

Anyway. Click Finish to complete the installation.

Windows XP Users: Control Panel: Classic View

Turn on your computer. Insert your Installation CD-ROM into your drive before

you log in or Windows opens. Windows will install the hardware with in-built

drivers. After it has finished, click Windows Start, Control Panel. Double-click

Phone and Modem Options. Enter the requested dialing information; click OK.

Select the Modems tab. Click Properties. Select the Driver tab. Click Update

Driver. Select Install from a list or specific location (Advanced) and click Next.

Select Don’t search. I will choose the driver to install and click Next. Select Have

Disk. Click Browse and select your CD-ROM drive. Select Win2K_XP and select

the driver most appropriate to your modem. Click Next. A Digital Signature Not

Found message may appear*. Click Continue Anyway. Click Finish to complete

the installation.

Windows 2000 Users

Turn on your computer. Insert your Installation CD-ROM into your drive before

you log in. When the Found New Hardware screen appears, click Next. Select

Search for a suitable driver for my device (recommended). Click Next. Select

CD-ROM drives. Click Next. A Digital Signature Not Found message may appear*.

Click Yes. Click Finish to complete the installation.

* USRobotics has thoroughly tested this driver in conjunction with the supported hardware and has

verified compatibility with Windows XP/2000.

Windows Me Users

Turn on your computer. Insert your Installation CD-ROM into your drive before

Windows opens. When the Add New Hardware Wizard appears, select Automatic

search for a better driver (Recommended), and click Next. Click Finish to

complete the installation.

Windows 98 Users

Turn on your computer. Insert your Installation CD-ROM into your drive before

Windows opens. When the Add New Hardware Wizard appears, click Next. Select

Search for the best driver for your device (Recommended), and click Next.

Select Specify a location and click Browse. Select your CD-ROM drive; click OK.

Click Next. When the driver is found, click Next. Click Finish. When the Add New

Hardware Wizard appears, click Next. Select Search for the best driver for your

device (Recommended), and click Next. Select Specify a location and click

Browse. Select your CD-ROM drive; click OK. Click Next. When the driver is

found, click Next. Click Finish to complete the installation.

Windows 95 Users

Turn on your computer. Insert your Installation CD-ROM into your drive before

Windows opens. When the Update Device Driver Wizard appears, click Next. If

the Wizard is unable to locate the driver, click Other Locations. Click Browse and

select your CD-ROM drive. Click OK. Click Finish. At this point you may get an

Insert Disk notice. Click OK. The Copying Files screen will open. Click Browse and

select your CD-ROM drive. Click OK. The Copying Files screen will appear again.

When the Update Device Driver Wizard appears, click Next. If the Wizard is

unable to locate the driver, click Other Locations. Click Browse and select your

CD-ROM drive. Click OK. Click Finish to complete the installation.

Step 3: Verify that the modem is properly installed.

Windows XP

Click Windows Start, and click Control Panel. Click Network and Internet

Connections, Phone and Modem Options, and then click the Modems tab. You

should see a description of your modem, USRobotics V.92 Voice Win Int, and a

COM port setting. If you do not see a description of your modem, see the Note

after this section. If you do see the description, click Modem, highlight the

description of your new modem, and click Properties. Click the Diagnostics tab.

Click the Query Modem button. You should see a series of commands and

responses from the modem. This means that the installation was a success. If

you do not see commands and responses, see the Note after this section.

Windows 2000

Click Windows Start, Settings, and then Control Panel. Double-click the Phone

and Modem Options icon. Click the Modems tab. Make sure that the correct

modem is highlighted, USRobotics V.92 Voice Win Int. If you do not see a

description of your modem, see the Note after this section. If you do see the

description, click the Properties button. Click the Diagnostics tab. Click the

Query Modem button. You should see a series of commands and responses from

the modem. This means that the installation was a success. If you do not see

commands and responses, see the Note after this section.

Windows Me/98/95

Click Windows Start, Settings, and then Control Panel. Double-click the Modems

icon. In the Modems Properties screen, you should see a description for your

modem, USRobotics V.92 Voice Win Int. If you do not see a description of your

modem, see the Note after this section. If you do see the description, click the

Diagnostics tab. Make sure that the correct COM Port (modem) is highlighted.

Click the More Info button. You should see a series of commands and responses

from the modem. This means that the installation was a success. If you do not

see commands and responses, see the Note after this section.

NOTE: If your modem is not listed and/or you do not see a series of

commands and responses, make sure that your internal modem is

physically installed correctly in your computer. With the power off,

press the modem in firmly so that it is seated properly in its slot. When

the modem is installed correctly, you will no longer see any part of the gold edge.

If your modem still does not work, you may need to remove it and reinstall it in

another available slot. Shut down and restart your PC. Check your modem again

using Control Panel as described previously.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere US Robotics Modem Handbücher

US Robotics

US Robotics COURIER HST Bedienungsanleitung

US Robotics

US Robotics 56K SERIAL CONTROLLER FAXMODEM Bedienungsanleitung

US Robotics

US Robotics 56K MESSAGE MODEM - QUICK FOR WINDOWS Bedienungsanleitung

US Robotics

US Robotics USR9002 Bedienungsanleitung

US Robotics

US Robotics USR5699B Bedienungsanleitung

US Robotics

US Robotics 005698-00 Bedienungsanleitung

US Robotics

US Robotics 002605-00 - Bedienungsanleitung

US Robotics

US Robotics USR5610B Bedienungsanleitung

US Robotics

US Robotics USR8500 Bedienungsanleitung

US Robotics

US Robotics USR5699C Bedienungsanleitung

US Robotics

US Robotics USR5610B Bedienungsanleitung

US Robotics

US Robotics Courier V.Everything Bedienungsanleitung

US Robotics

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Installationshandbuch

US Robotics

US Robotics USR9001 Bedienungsanleitung

US Robotics

US Robotics 3CP5610 Bedienungsanleitung

US Robotics

US Robotics 56K SERIAL CONTROLLER FAXMODEM Bedienungsanleitung

US Robotics

US Robotics 005690-00 - Bedienungsanleitung

US Robotics

US Robotics 56K FAXMODEM USB - FOR WINDOWS REV 1.1 Bedienungsanleitung

US Robotics

US Robotics 002805-00 Bedienungsanleitung

US Robotics

US Robotics 56K SERIAL CONTROLLER FAXMODEM Bedienungsanleitung

US Robotics

US Robotics 005689-03 Bedienungsanleitung

US Robotics

US Robotics SportsterVoice Bedienungsanleitung

US Robotics

US Robotics USR5638 Bedienungsanleitung

US Robotics

US Robotics Courier USR3510 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung

Aztech

Aztech HW831 Bedienungsanleitung