3Com also staffs its own fee-based 900 number for immediate
assistance. These lines are staffed from:
8:00 am - 10:00 pm CST Monday - Friday
9:00 am- 5:00 pm CST Saturday - Sunday
No-Hold line 900 555 USR1
For a no-hold call, a $2.50 per minute charge (price subject to
change without notice) will appear on your local phone bill. You
must be 18 or older or have parental permission. (Service avail-
able in the U.S. only.)
InCanada:
KeatingTechnologies
905 479 0231
8:00 am - 8:00 pm EST Monday - Friday
Troubleshooting
Having trouble with your modem? Try
these basic troubleshooting steps first!
1. Make sure that your phone cord is properly connected. Remove the
phone cord from the modem and wall jacks. Clean any dirt or corrosion
from the cord and jacks. Reinsert the cord securely in the wall jack and
the modem’s jack. Use the phone cord included with your modem,
if possible.
2. Make sure that your internal modem is physically installed correctly in
your computer. You will need to press the modem in firmly so that it is
seated properly in its slot. When the modem is installed correctly, you
will no longer see any part of the gold edge. See the front of this Guide for
complete instructions. If your modem still does not work, with your
computer off, remove the modem and reinstall it in another slot if possible.
PROBLEM:
TheWindowsoperatingsystemdoesnot recognize my
modem.
Possiblesolution:
You may be using an IRQ that is already in use. To work properly, your
modem needs to be assigned to a free IRQ.
Windows 95/98 Operating Systems
If Plug-and-Play fails to install the modem, you need to determine IRQ
availability. Right-click the My Computer icon on your desktop. Click
Properties, and then the Device Manager tab. Double-click the Computer
icon at the top of the device list. You will now see a listing of your system’s
IRQs and the devices to which they are assigned. If an IRQ is not present
in this list, it indicates that Windows is not currently using it, and the IRQ is
considered available.
Locate your modem in the list of devices. If a yellow exclamation point
appears over the modem’s description, your modem is in conflict with
another device. Either your modem or the other device will have to be
reinstalled to another IRQ in order to resolve your conflict. If a usable, free
IRQ does not exist, you may need to remove, disable, or relocate another
device. Refer to that device’s documentation for more information about
removing, disabling, or relocating it.
If Windows still fails to recognize your modem and it does not have a yellow
exclamation point next to its IRQ, or if your modem doesn’t appear in the
list, another problem exists, and you may need to call 3Com Technical
Support.
Windows NT Operating System
Turn off your computer and physically remove the modem. Restart your
computer, and check for an available IRQ by clicking Windows Start,
Programs, Administrative Tools, and Windows NT Diagnostics. Click
the Resources tab and select IRQ. Take note of an available IRQ that your
modem can use. If there are no IRQs available, you may have to remove,
disable, or relocate another device in order to free an IRQ for use by your
modem. Refer to that device’s documentation for more information about
removing, disabling, or relocating it.
Possiblesolution:
You may be using a COM port address that is either already in use or not
configured correctly.To work properly, this modem needs to be assigned to
a free COM port.
Windows 95/98 Operating Systems
Make sure your COM port is not already in use by another device. Click
Windows Start, Settings, and Control Panel, and then double-click
Modems. Look for another modem already installed in your computer. If
there is another modem installed, click the Diagnostics tab to find out
which COM port it is using. If a previously installed modem is already using
the available COM port, you should uninstall that modem. See your previous
modem’s manual for uninstallation instructions.
Right-click the My Computer icon on your desktop. Click Properties.
Click the Device Manager tab. Double-click Ports. If the Communications
Ports have yellow exclamation points or red Xs over them, your COM ports
may be configured incorrectly. If this is the case, you may need to contact
your computer manufacturer.
Windows NT Operating System
Turn off your computer and remove your modem. Restart and click Windows
Start, Settings, and then Control Panel. Double-click the Ports icon.
Your modem must be set to a COM port setting that does not appear in this
list.
PROBLEM:
Mysoftware isn’t recognizing my modem.
Possible solution:
Your communications software may not function properly if you
have more than one version of the software installed, you are using
an older version, or you have more than one communications
application installed on your system. We highly recommend using
the communications software provided with your modem on the
Installation CD-ROM.
Possiblesolution:
Your software’s COM port settings may be incorrect. There should
be a place in the Setup section of your software that addresses
port settings. Make sure the software’s port settings match those
for your modem. To check which COM port your modem is using,
click Windows Start, Settings, and Control Panel. Double-click
Modems, select your modem, and select Properties.
Check your communication software’s documentation for
instructions on adjusting the port settings in your software.
Possiblesolution:
You may not have the correct modem type selected in your software
or in Windows. Click on Windows Start, Settings, and Control
Panel. When Control Panel opens, double-click Modems. You
will see a list of installed modems. You can also add, remove, or
view the properties of modems from this window.The U.S. Robotics
modem you have installed should be present in the list of installed
modems. If none of the modem descriptions in the list match your
U.S. Robotics modem or no modems are listed, your modem is
not installed properly. Try reinstalling your modem.
Possiblesolution:
If you are using Dial-Up Networking, it may not be configured
correctly. Check your configuration and make sure you have the
correct modem selected. Double-click My Computer, double-
click Dial-Up Networking, right-click the connection you are trying
to use, and click Properties. Make sure that the description in
the modem box matches the description of the modem you are
using. If it doesn’t match, select the proper modem description.
PROBLEM:
My modem won’t dial out or doesn’t answer
incoming calls.
FORBOTH DIALING ANDANSWERING PROBLEMS:
Possiblesolution:
You may have a bad phone cord connection to your modem, or
your phone cord may be plugged into the wrong jack. The phone
cord should be plugged into the jack on the modem and into
the wall phone jack. Use the phone cord included in your modem’s
box if possible.
Possiblesolution:
You may have devices between the modem and the phone jack.
There should be no line splitters, fax machines, or other devices
between the modem and the wall jack.
OFFICEUSERS:
Possiblesolution:
You may have plugged your modem’s phone cord into a digital
line. Contact the department responsible for your phone system if
you are unsure whether or not your phone line is digital.
If your phone system requires dialing “9” to access an outside
line, be sure to add “9” before the number you are dialing.
VOICEMAIL USERS:
Possiblesolution:
If you have voice mail provided by your local phone company, your
dial tone may be altered when messages are waiting. Retrieve
your voice mail to restore your normal dial tone.
PROBLEM:
My modem sounds like it’s trying to connect
to another modem but fails.
Possiblesolution:
You may have a poor connection. All calls are routed differently,
so try placing the call again.
PROBLEM:
My modem isn’t achieving a 56K* Internet
connection.
Note: Due to current FCC regulations on power output, maximum
download speed is limited to 53,333 bps.
Our research has shown that the vast majority of telephone lines
in North America can and do support V.90 connections. The V.90
protocol allows for connection speeds of up to 56K, but line conditions
may affect the actual speeds during a given connection. Due to
unusual telephone line configurations, some users will not be able to
take full advantage of V.90 technology at this time. In order to achieve
a V.90 connection:
• The server you’re dialing in to must support and provide a digital
V.90 signal. Your ISP can provide you with a list of dial-up
connections and information on what those connections currently
support.
• The telephone line between your ISP and your modem must be
capable of supporting a 56K connection and contain only one
analog-to-digital conversion. The 56K signal from your ISP begins
as a digital signal. Somewhere between the ISP and your modem,
there will be a digital-to-analog signal conversion so that your modem
can receive the data. There must be no more than one analog-to-
digital signal conversion in the path from your ISP to your modem.
If more than one analog-to-digital conversion occurs, your connect
speeds will default to V.34 (33.6 Kbps). There may also be
impairments on the local lines between your ISP and your modem.
These impairments can prevent or limit V.90 connection speeds.
All telephone calls are routed differently, so you should try making
your 56K connection several times. One way to test this is to dial
into a long distance location. Long distance lines are often much
clearer than local lines. It is important to note that telephone
companies are constantly upgrading their systems. Lines that do
not support 56K today may support 56K in the near future.
• Your modem must be connecting to a V.90/56K server.A pair of
56K modems will not connect to each other at V.90/56K speeds.
*IMPORTANT! In accordance with the ITU-Tstandard for 56K transmissions
(V.90), this modem is capable of 56 Kbps downloads. However, the download
speeds you experience may lower due to varying line conditions and other
factors. Uploads from users to server equipment travel at speeds up to 31.2
Kbps. An analog phone line compatible with the V.90 standard, and an Internet
provider or corporate host site compatible with the V.90 standard is necessary
for these high-speed downloads.
Support Resources
Net2PhoneSM Software Support
If you need support on the Net2PhoneSM software that is included
with your Internet Call Modem, first refer to the “Troubleshoot-
ing” chapter of the printed User’s Guide that came with your
modem. If you still require assistance, please contact
Net2PhoneSM:
Customer Service
1 800 438 8879
E-mail
World Wide Web
Contains useful product information, documents, and manuals.
Log on to:
http://www.Net2Phone.com
Internet Call Modem Support
If you have not fixed a problem after trying the suggestions in the
“Troubleshooting” section, you can receive additional help via one of
these convenient resources:
World Wide Web
Contains useful product information, documents, and manuals.
Log on to:
http://www.usr.com/support
U.S. Robotics Knowledgebase
A Web-based troubleshooting tool that will help you solve prob-
lems you may be having with your modem. Go to
http://www.usr.com/kb
When the page loads, click the Modems graphic. Then follow the
onscreen directions.
Internet FTP
ftp://ftp.usr.com
Are You Still Having Problems?
1.Call the Dealer Who Sold Youthe Modem
The dealer may be able to troubleshoot the problem over the phone or
may request that you bring the modem back to the store for service.
2. Call 3Com’s Technical Support Department
Technical questions about 3Com modems can also be answered by
technical support specialists.
In the United States:
847 262 5151
8:00 am - 6:00 pm CST Monday - Friday.
Automated service is available 24 hours a day, 7 days a week.
Manufacturer’s Declaration of Conformity
U.S. Robotics Corporation
3800 Golf Road
Rolling Meadows, IL 60008
U.S.A.
Telephone: 847 262 5000
We declare under our sole responsibility that the Internet Call Modem is in conformity with the
following standards or other normative documents:
FCC Compliance
Federal Communications Commission 47 CFR Part 15, Subpart B:
ANSI C63.4-1992 Test Procedure
15.107 (e) Class B Conducted Emissions Limits
15.109 (g) Class B Radiated Emissions Limits
Federal Communications Commission CFR Part 68
Analog Terminal Equipment – refer to bottom of unit
Registration No. and REN data – refer to bottom of unit
This equipment uses RJ-11C USOC Jacks
For Industry Canada
ICES-003 Class B Emissions Limits
CS-03 Analog Terminal Equipment
UL Listed, UL1950, 2nd edition
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful electromagnetic interference, and
(2) this device must accept any interference received including interference that may cause
undesired operations.
FCC Notice: Radio and Television Interference
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause interference to radio and television communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to a radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
- Consult the dealer or an experienced radio/TV technician for help.
The user may find the following information prepared by the Federal Communications Commission
helpful: The CIB Interference Handbook and The CIB Telephone Interference Bulletin.
These documents are available through the Internet through the FCC Compliance and Interference
Bureau Home Page at http://www.fcc.gov/cib listed under documents. Select CIB Interference
Handbook or CIB Telephone Interference Bulletin.
Caution to the User
The user is cautioned that any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Part 68:
This equipment complies with FCC Rules Part 68. Located on the bottom of the modem is the FCC
Registration Number and Ringer Equivalence Number (REN). You must provide this information to the
telephone company if requested.
The REN is used to determine the number of devices you may legally connect to your telephone line. In
most areas, the sum of the REN of all devices connected to one line must not exceed five (5.0). You should
contact your telephone company to determine the maximum REN for your calling area.
This equipment uses the following USOC jacks: RJ11C.
This equipment may not be used on coin service provided by the telephone company. Connection to party
lines is subject to state tariffs.
An FCC compliant, 26 AWG, telephone cord and modular plug are provided with this equipment, which
is designed to connect to the telephone network or premises wiring using a Part 68 compliant compatible
jack. See installation instructions for details.
Be sure that the telephone line you are connecting the modem to is a standard analog line and not a
digital (PBX), party, or coin telephone line.
If this device causes harm to the telephone network, the telephone company will notify you in advance
that temporary discontinuance of service may be required. But, if advance notice is not practical, the
telephone company will notify the customer as soon as possible. Also, you will be advised of your right
to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that
could effect the operation of the equipment. If this happens, the telephone company will provide
advance notice in order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this device, for repair and warranty information, please refer to the
Technical Support section for repair information and the warranty section of this User Guide for warranty
information.
In the event of a device malfunction, all repairs should be performed by 3Com or an authorized agent.
It is the responsibility of users requiring service to report the need for service to our company or to one of
our authorized agents. In event service is required, refer to the Technical Support section for
information.
Service can be obtained at:
3Com Corporation
1800 W. Central Rd.
Mount Prospect, IL 60056
This registered device is capable of providing users access to interstate providers of operator services
through the use of equal access codes.
UL Listing/CUL Listing
This information technology equipment is UL-Listed and CUL-Listed for use with UL-Listed personal
computers that have installation instructions detailing user installation of card accessories.
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device, including fax machines, to send any message unless such message
clearly contains in the margin at the top or bottom of each transmitted page or on the first page of
the transmission, the date and time it is sent, an identification of the business or other entity, or other
individual sending the message, and the telephone number of the sending machine or of such
business, other entity, or individual. (The telephone number provided may not be a 900 number or
any other number for which charges exceed local or long-distance transmission charges.)
In order to program this information into your modem, refer to the RapidCommTM manual on the CD-ROM
that shipped with your modem. If you are using a different communication software program, refer to its
manual.
For Canadian Modem Users
Industry Canada (IC)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the
interference-causing equipment standard entitled Digital Apparatus, ICES-003 of Industry Canada.
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface
may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all devices does not exceed 5.
The Ringer Equivalence Number is located on the bottom of the modem.
NOTICE: The Industry Canada (IC) label identifies certified equipment. This certification means the equipment meets
certain telecommunications network protective, operational, and safety requirements as prescribed in the appropriate
Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will
operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed using an acceptable method of connection. In
some cases, the company’s inside wiring associated with a single-line, individual service may be extended by means
of a certified connector assembly (telephone extension cord.) The customer should be aware that compliance with the
above conditions may not prevent degradation of service in some situations. Currently, telecommunication companies
do not allow users to connect their equipment to jacks except in precise situations that are spelled out in tariffing
arrangements with those companies.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
«AVIS : L’étiquette d’Industrie Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est
conforme aux normes de protection, d’exploitation et de sécurité des réseaux de télécommunications, comme le
prescrivent les documents concernant les exigences techniques relatives au matériel terminal. Le Ministère n’assure
toutefois pas que le
matériel fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder aux installations de l’entreprise
locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de
raccordement. L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées cidessus
n’empêche pas la dégradation du service dans certaines situations.
Les réparations de matériel homologué doivent être coordonnées par un représentant désigné par le fournisseur.
L’entreprise de télécommunications peut demander à l’utilisateur de débrancher un appareil à la suite de réparations
ou de modifications effectuées par l’utilisateur ou à cause de mauvais fonctionnement.
Centre de guarantie et de service après-vente:
Keating Technologies
25 Royal Crest Court, Suite 120
Markham, ONT L3R 9X4
3Com Corporation Limited Warranty
HARDWAREHARDWARE
HARDWAREHARDWARE
HARDWARE: 3Com warrants to the end user (“Customer”) that this hardware product will be free from
defects in workmanship and materials, under normal use and service, for the following length of time from
the date of purchase from 3Com or its authorized reseller:
Five (5) years
3Com’s sole obligation under this express warranty shall be, at 3Com’s option and expense, to repair the
defective product or part, deliver to Customer an equivalent product or part to replace the defective item, or if
neither of the two foregoing options is reasonably available, 3Com may, in its sole discretion, refund to
Customer the purchase price paid for the defective product. All products that are replaced will become the
property of 3Com. Replacement products may be new or reconditioned. 3Com warrants any replaced or
repaired product or part for ninety (90) days from shipment, or the remainder of the initial warranty period,
whichever is longer.
SOFTWARE: 3Com warrants to Customer that each software program licensed from it will perform in
substantial conformance to its program specifications, for a period of ninety (90) days from the date of
purchase from 3Com or its authorized reseller. 3Com warrants the media containing software against
failure during the warranty period. No updates are provided. 3Com’s sole obligation under this express
warranty shall be, at 3Com’s option and expense, to refund the purchase price paid by Customer for any
defective software product, or to replace any defective media with software which substantially conforms to
applicable 3Com published specifications. Customer assumes responsibility for the selection of the
appropriate applications program and associated reference materials. 3Com makes no warranty or
representation that its software products will meet Customer’s requirements or work in combination with
any hardware or applications software products provided by third parties, that the operation of the software
products will be uninterrupted or error free, or that all defects in the software products will be corrected. For
any third-party products listed in the 3Com software product documentation or specifications as being
compatible, 3Com will make reasonable efforts to provide compatibility, except where the noncompatibility
is caused by a “bug” or defect in the third party’s product or from use of the software product not in
accordance with 3Com’s published specifications or User Guide.
THIS 3COM PRODUCT MAY INCLUDE OR BE BUNDLED WITH THIRD-PARTY SOFTWARE, THE USE
OF WHICH IS GOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. THIS 3COM
WARRANTY DOES NOT APPLY TO SUCH THIRD-PARTY SOFTWARE. FOR THE APPLICABLE
WARRANTY, PLEASE REFER TO THE END-USER LICENSE AGREEMENT GOVERNING THE USE OF
SUCH SOFTWARE.
YEAR 2000 WARRANTY: In addition to the Warranty stated above, 3Com warrants that each product
sold or licensed to Customer on and after January 1, 1998 that is date sensitive will continue perform-
ing properly with regard to such date data on and after January 1, 2000, provided that all other
products used by Customer in connection or combination with the 3Com product, including hard-
ware, software, and firmware, accurately exchange date data with the 3Com product, with the excep-
tion of those products identified at 3Com’s Web site, http://www.3com.com/products/yr2000.html
as not meeting this standard. If it appears that any product that is stated to meet this standard does
not perform properly with regard to such date data on and after January 1, 2000, and Customer
notifies 3Com before ninety (90) days after purchase of the product from 3Com or its authorized
reseller, 3Com shall, at its option and expense, provide a software update which would effect the
proper performance of such product, repair such product, deliver to Customer an equivalent product
to replace such product, or if none of the foregoing is feasible, refund to Customer the purchase price
paid for such product.
OBTAINING WARRANTY SERVICE: Customer must contact a 3Com Corporate Service Center or an
Authorized 3Com Service Center within the applicable warranty period to obtain warranty service
authorization. Dated proof of purchase from 3Com or its authorized reseller may be required. Prod-
ucts returned to 3Com’s Corporate Service Center must be pre-authorized by 3Com with a User
Service Order (USO) number marked on the outside of the package, and sent prepaid and packaged
appropriately for safe shipment, and it is recommended that they be insured or sent by a method that
provides for tracking of the package. The repaired or replaced item will be shipped to Customer, at
3Com’s expense, not later than thirty (30) days after 3Com receives the defective product. Return the
product to:
In The United States:
3Com
USO# ______________
Attn. Dock 15 PCD
1800 W. Central Ave.
Mt. Prospect, IL 60056
In Canada:
Keating Technologies
25 Royal Crest Court, Suite 120
Markham, ONT L3R 9X4
3Com shall not be responsible for any software, firmware, information, or memory data of Customer
contained in, stored on, or integrated with any products returned to 3Com for repair, whether under
warranty or not.
WARRANTIES EXCLUSIVE: IF A 3COM PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE,
CUSTOMER’S SOLE REMEDY FOR BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACE-
MENT, OR REFUND OF THE PURCHASE PRICE PAID, AT 3COM’S OPTION. TO THE FULL EXTENT
ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN
LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN
FACT OR BYOPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES,TERMS,
OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFAC-
TORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGEMENT, ALL OF
WHICH ARE EXPRESSLY DISCLAIMED. 3COM NEITHER ASSUMES NOR AUTHORIZES ANY OTHER
PERSON TO ASSUME FOR ITANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLA-
TION, MAINTENANCE OR USE OF ITS PRODUCTS. 3COM SHALL NOT BE LIABLE UNDER THIS
WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MAL-
FUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY
THIRDPERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO OPEN, REPAIR OR MODIFY THE PRODUCT, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS, OR
ACTS OF GOD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW, 3COM ALSO EXCLUDES FOR
ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUD-
ING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAM-
AGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH
THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION
OF ITS PRODUCTS, EVEN IF 3COM OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR
REFUND OF THE PURCHASE PRICE PAID, AT 3COM’S OPTION. THIS DISCLAIMER OF LIABILITY
FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS
ESSENTIAL PURPOSE.
DISCLAIMER: Some countries, states, or provinces do not allow the exclusion or limitation of implied
warranties or the limitation of incidental or consequential damages for certain products supplied to
consumers, or the limitation of liability for personal injury, so the above limitations and exclusions
may be limited in their application to you. When the implied warranties are not allowed to be excluded
in their entirety, they will be limited to the duration of the applicable written warranty. This warranty
gives you specific legal rights which may vary depending on local law.
GOVERNING LAW: This Limited Warranty shall be governed by the laws of the State of California,
U.S.A. excluding its conflicts of laws principles and excluding the United Nations Convention on
Contracts for the International Sale of Goods.
