UTICA BOILERS 95M-200 Bedienungsanleitung

Quick Guide

for Set-up

and Operation

95M-200

Natural or Propane Gas-fired

Modulating Condensing Boiler

PN 240006282 Rev. A - 5/08

▲

WARNING

Revise boiler control parameters only if you fully understand the

purpose and result of the changes. Tampering with the control

settings in this manual will void the warranty and can result in

unreliable operation, with possible severe personal injury,

death, or substantial property damage. Refer to PN240006105

Parameter Guide, for full details.

Select Parameter Definitions (see manual 240006105 for full list) See pages 6 & 7 for Factory Settings

DEFAULT LOWER UPPER

PARAMETER

NAME DESCRIPTION VALUE LIMIT LIMIT

1 T3 Set DHW target temperature (See Parameter 33) 150˚F 68˚F 158˚F

2 DHW System 01 = ON DISPLAY-01 N/A N/A

3 CH System 01 = ON DISPLAY-01 N/A N/A

4* T1 Top Maximum target supply water temperature 180˚F 68˚F 182˚F

5* T1 Foot Minimum target supply water temperature 120˚F 60˚F 140˚F

6* T4 Minimum Outside temp at which the target supply

temperature is at maximum 0˚F -4˚F 50˚F

7* T4 Maximum Outside temp at which the target supply

temperature is at minimum 60˚F 60˚F 78˚F

33 T Plus This value plus parameter 1 equals the

DHW set point. 30˚F 0˚F 54˚F

*Parameters 4-7 define the boilers Outdoor Reset Curve. See pages 6 & 7 for examples of the Outdoor Reset Curve.

Outdoor Reset Overview

60˚ F

(P7)

0˚ F

(P6)

120˚ F

(P5)

180˚ F

(P4)

120˚: 190 Btu/hr.

150˚: 370 Btu/hr.

180˚: 560 Btu/hr.

Outdoor

Temp.

Boiler Water Temp.

* Baseboard output:

MODULATION CURVE

NOTE: Domestic priority

will override outdoor reset

EXAMPLE 1 (Factory Settings) P7, P6, P5 & P4

Radiant Outdoor Reset

60˚ F

(P7)

0˚ F

(P6)

85˚ F

(P5)

110˚ F

(P4)

180

Outdoor

Temp.

Boiler Water Temp.

P1=150˚ F Plus P33=30˚ F Equals 180˚ F Boiler Water

Temperature for Domestic

NOTE: Domestic priority

will override outdoor reset

EXAMPLE 2 (Low Water Temperature System)

Boiler Display Key Pad Operation:

Changing a parameter

Using the six buttons on the front of the boiler (see next page for illustration) and the proper code,

the boiler can be both monitored and modified using the digital display.

Perform the following steps with the boiler powered on and in standby [STBY] mode: (STBY will

appear only momentarily followed by 0.(boiler temp), i.e. 0.120

1. Press and hold the "STEP" button.

2. While holding the "STEP" button down, press and hold the "MODE" button.

3. Hold both buttons down together for several seconds until [CODE] appears on the display.

4. Release "STEP" and "MODE" buttons. [CODE] will stay lit on the display.

NOTE: If [CODE] is not displayed after several seconds, release "STEP" and "MODE" buttons

and press "MODE" several times to return display to [STBY]. Then repeat steps 1-4 again.

5. Press the "STEP" button once (C "xx" will appear, i.e. C 17)

6. Adjust the number displayed to [C-05] by using the "+" and "–" buttons.

7. Press the "STORE" button.

IMPORTANT:The boiler control will automatically exit [CODE] mode

after 10 minutes of no activity.

18. Press the "MODE" button several times until [PARA] is displayed.

19. Press the "STEP" button several times until [P-XX] is displayed. The XX represents the parameter

that will be changed (i.e. P-05). The parameter’s value will then be displayed.

10. Use the "+" or "–" buttons to set the desired value.

11. Press the "STORE" button. Steps 9-11 can now be repeated for additional parameter changes

or continue to step 12 to exit.

12. Press the "RESET" button to exit.

Andere Handbücher für 95M-200

Inhaltsverzeichnis

Andere UTICA BOILERS Kessel Handbücher

UTICA BOILERS

UTICA BOILERS UB90 Bedienungsanleitung

UTICA BOILERS

UTICA BOILERS TriFire Installationsanleitung

UTICA BOILERS

UTICA BOILERS MGC-8D Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS Trifire 3 Series Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS DVB-50 Betriebsanleitung

UTICA BOILERS

UTICA BOILERS MGB Series Leitfaden

UTICA BOILERS

UTICA BOILERS UB90125 Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS SVB-2 Bedienungsanleitung

UTICA BOILERS

UTICA BOILERS STARFIRE 3 STEAM Technisches Dokument

UTICA BOILERS

UTICA BOILERS PEG112C Bedienungsanleitung

UTICA BOILERS

UTICA BOILERS STARFIRE IV STEAM 4 Series Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS SW3 Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

UTICA BOILERS

UTICA BOILERS DV Leitfaden

UTICA BOILERS

UTICA BOILERS UB90 125 Technisches Dokument

UTICA BOILERS

UTICA BOILERS PEG075EID Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS SFH-3085 Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS SFH Series Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS SFM CONSTELLATION Series Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS SSV-150 Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS UB90-50 Bedienungsanleitung

UTICA BOILERS

UTICA BOILERS UB95M-200 Gebrauchsanweisung

UTICA BOILERS

UTICA BOILERS Gas-fired Boiler Bedienungsanleitung

UTICA BOILERS

UTICA BOILERS SFH 5 Series Gebrauchsanweisung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch