V.link RL2-DVD900 Bedienungsanleitung

Version 01.07.2016

r.LiNK Video-inserter

RL2-DVD900

for Opel, Chevrolet and Buick

with CD500, DVD600, DVD800, DVD900,

CD600intelliLink and DVD950intelliLink

navigation systems/radios

Video-inserter for front- and rear-view camera input

and additional video source

Product features

Video-Inserter for Factory-Infotainment Monitors

Rear and Front Camera FBAS Input

FBAS Video Input for After-Market Devices (e.g. DVD-Player, DVD-Tuner)

Automatic Switching to Rear View Camera, Input by Engagement of Reverse Gear

Manual Switching to Front Camera by Keypad or factory button

Activatable Parking Guide Lines for Rear-View Camera (not all vehicles)

Video-in-motion (ONLY for connected video-sources)

AV-inputs PAL/NTSC compatible

All manuals and user guides at all-guidesbox.com

all-guidesbox.com

Version 01.07.2016 RL2-DVD900

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Boxes and connectors

1.3.1. Video-Interface

1.3.2. GM-LAN box

1.4. Dip-switch settings

1.4.1. Enabling the interface’s video inputs (dip 1-3)

1.4.2. RGB-video input signal selection for after-market navigation (Dip 4)

1.4.3. Rear-view camera setting (dip 5)

1.4.4. Monitor selection (dip 7-8)

2. Installation

2.1. Place of installation

2.2. Connection schema

2.3. Connecting video-interface and GM-LAN box

2.4. Connection to the factory monitor

2.5. Connecting peripheral devices

2.5.1. After-market rear-view camera

2.5.1.1. Case 1: GM-LAN box detects reverse gear

2.5.1.2. Case 2: GM-LAN box does not detect reverse gear

2.5.1.3. Video signal connection of rear-view camera

2.5.2. After-market front camera

2.5.3. After-market video-source

2.5.4. Audio-insertion

2.6. Connecting video-interface and keypad

2.7. Picture settings and guide lines

3. Interface operation

3.1. By “hang up” key

3.2. By keypad

4. Specifications

5. Frequently asked questions

6. Technical support

All manuals and user guides at all-guidesbox.com

Version 01.07.2016 RL2-DVD900

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. This product should only

be used while standing or to display fixed menus or rear-view-camera video when the

vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We

offer free software-updates for our interfaces for one year after purchase. To receive a free

update, the interface must be sent in at own cost. Labor cost for and other expenses

involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation.

Technical knowledge is necessary for installation. The place of installation must be free of

moisture and away from heat sources.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

All manuals and user guides at all-guidesbox.com

Version 01.07.2016 RL2-DVD900

Page4

Requirements

Vehicle Buick Lacrosse , Regal

Opel Insignia A, Astra J, Meriva B, Mokka

Chevrolet Cruze, Orlando

Head-unit/monitor CD500, DVD600, DVD800, DVD900, CD600intelliLink and

DVD950intelliLink

Limitations

Video only The interface inserts ONLY video signals into the infotainment.

For sound use the possibly existing factory-audio-AUX-input or a

FM-modulator.

Factory rear-view camera Automatic switch-back from inserted video to factory rear-view

camera only while reverse gear is engaged. To extend the switch-

back additional electronics is required.

1.2. Checking the compatibility of vehicle and accessories

1.3. Boxes and connectors

1.3.1. Video-interface

The video-interface converts the connected after-market sources video signals to an GVIF

signal which is the inserted into the factory monitor on certain trigger options.

All manuals and user guides at all-guidesbox.com

Version 01.07.2016 RL2-DVD900

Page5

1.3.2. GM-LAN box

The GM-LAN box reads digital signals from the GM-LAN-bus and converts them for the

video-interface.

1.4. Dip-switch settings

Some settings must be selected by the dip-switches on the

video-interface. Dip position down is ON and position up is OFF.

See following chapters for detailed information.

1.4.1.1. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed when switching through the interface’s video

sources. It is recommended to enable only the required inputs for the disabled will be

skipped when switching through the video-interfaces inputs.

Dip

Function

ON (down)

OFF (up)

No Function

Set OFF

Input

Front Camera

enabled

disabled

Video 2

enabled

disabled

No Function

Switch to OFF

Rear-view cam type

After-Market

Factory or none

No function

Set OFF

Monitor

selection

Try all 4 possible combinations of dip 7 and 8 to find the

best picture (quality and size)

All manuals and user guides at all-guidesbox.com

Version 01.07.2016 RL2-DVD900

Page6

1.4.1.2. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory LVDS picture while the reverse gear is engaged

to display factory rear-view camera or factory optical park system picture.

If set to ON, the interface witches to its rear-view camera input CAM while the reverse gear

is engaged.

1.4.1.3. Monitor selection (dip 7-8)

Dip 7 and 8 are for monitor-specific video settings which cannot be predicted as even within

the same head-unit version, the monitor specifications may vary. It is necessary to try all

possible combinations (both OFF, both ON, 7 OFF and 8 ON, 7 ON and 8 OFF) - while a

working video source is connected to the chosen input of the interface - to see which

combination gives the best picture quality and size (some may give no picture). It is possible

to first hot plug through the dip combinations, but if you do not experience any change of

picture after trying all 4 options, retry and disconnected the 6pin power plug of the video-

box between every change of the dip setting.

2. Installation

Switch off ignition and disconnect the vehicle’s battery! The interface needs a permanent

12V source. If according to factory rules disconnecting the battery is to be avoided, it is

usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show

success, disconnect the battery with a resistor lead.

If power source is not taken directly from the battery, the connection has to be checked

for being start-up proven and permanent.

2.1. Place of installation

The interface is installed on the backside of the factory monitor.

All manuals and user guides at all-guidesbox.com

all-guidesbox.com

Version 01.07.2016 RL2-DVD900

Page7

2.2. Connection schema

All manuals and user guides at all-guidesbox.com

Version 01.07.2016 RL2-DVD900

Page8

2.3. Connecting video-interface and GM-LAN box

The GM-LAN box reads digital signals from the GM-LAN and converts them for the video-

interface. ACC +12V max. 0.5A (red of 6pin) and reverse gear +12V max. 0.5A (green of 6pin)

constant signal. Video-source switching (white of 6pin) as +12V impulse.

Connect black female 4pin Micro-Fit connector of the 4pin cable to the male 4pin

Micro-Fit connector of the GM-LAN-box.

Note: Check LEDs on GM-LAN-box after reconnecting the battery, one must be on.

1) GM-LAN

2) +12V Battery

3) Ground

Note: GM-LAN position can be different on certain vehicles

Vehicle female Quadlock connector

All manuals and user guides at all-guidesbox.com

Version 01.07.2016 RL2-DVD900

Page9

Connect white female 6pin Molex connector of the 6pin to 8pin cable to the male

6pin Molex connector of the video-interface.

Connect black female 8pin Micro-Fit connector of the 6pin to 8pin cable to male 8pin

Micro-Fit connector of the GM-LAN-box.

Note: Check LEDs on video-interface after reconnecting the battery, one must be on.

Connect red-green drilled cable of 6pin of 8pin cable to the male 4pin connector of

the video-interface.

Note: The GM-LAN-box is not compatible with all vehicles. If the GM-LAN-box does not

deliver ACC to pin2 of the video-interface or blocks the vehicle GM-LAN, it is possible to

install without GM-LAN -box. In this case see also note in chapter after-market rear-view

camera if one is supposed to be connected.

All manuals and user guides at all-guidesbox.com

Version 01.07.2016 RL2-DVD900

Page10

2.4. Connections to the factory monitor

Remove factory monitor.

Connect female 8pin connector of the GVIF cable to the male 8pin connector of the

interface.

Remove female GVIF connector from the rear of the factory monitor and connect it

to the GVIF connector of the GVIF cable.

Connect female GVIF connector of the GVIF cable to the male GVIF connector of the

factory monitor.

All manuals and user guides at all-guidesbox.com

Inhaltsverzeichnis

Andere v.link Auto-Videosystem Handbücher

v.link

v.link VL2-LR12-TS Bedienungsanleitung

v.link

v.link CI-VL2-MIB-2 Bedienungsanleitung

v.link

v.link VL2-MBN4 Betriebsanleitung

v.link

v.link CI-VL3-R40 Bedienungsanleitung

v.link

v.link CI-VL2-RTI11-5 Bedienungsanleitung

v.link

v.link CI-VL2-SY2-P Bedienungsanleitung

v.link

v.link CI-VL2-CONCERT Bedienungsanleitung

v.link

v.link VL2-RTI11-5 Bedienungsanleitung

v.link

v.link VL2-RLINK Bedienungsanleitung

v.link

v.link VL2-CIC-F Bedienungsanleitung

v.link

v.link VL2-UCON8-AO Bedienungsanleitung

v.link

v.link VL2-MTC Bedienungsanleitung

v.link

v.link VL2-MIB-3 Bedienungsanleitung

v.link

v.link CI-VL2-SY2-N Bedienungsanleitung

v.link

v.link VL2-MIB2-E Bedienungsanleitung

v.link

v.link VL2-MMI2G Bedienungsanleitung

v.link

v.link VL2-DVD900 Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken

Stinger

Stinger HEIGH10 RB10RAM13B Bedienungsanleitung

Eonon

Eonon E1057 Bedienungsanleitung

Milion

Milion D2223 Bedienungsanleitung

Metra Electronics

Metra Electronics 99-8153 Bedienungsanleitung

Voxx Electronics

Voxx Electronics HR8MA1 Bedienungsanleitung

Axxera

Axxera AV604Bi Bedienungsanleitung

Clarion

Clarion NX706E Bedienungsanleitung

Pyle view

Pyle view PLDN74BTi Bedienungsanleitung

Clarion

Clarion NX602 Bedienungsanleitung

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Benutzerhandbuch

Kia

Kia MTXM100YPPE Bedienungsanleitung

Lanzar

Lanzar SVDVD5 Bedienungsanleitung

Eonon

Eonon E1060 Bedienungsanleitung

Macrom

Macrom M-AN900 Bedienungsanleitung

Hyundai

Hyundai BAPE-L3000N Bedienungsanleitung

r.LiNK

r.LiNK RL2-UCON8-SM Bedienungsanleitung

Blaupunkt

Blaupunkt DVP 01C Bedienungsanleitung

DP Audio Video

DP Audio Video dbd807nav Bedienungsanleitung

v.link RL2-DVD900 Bedienungsanleitung

Beliebte Auto-Videosystem Handbücher anderer Marken