V-Tec DT607 Bedienungsanleitung

USER MANUAL

DT-ENG-DT607-V1 / 201607

• Please read this manual carefully to ensure safe and correct operation.

• Keep this manual well for future reference.

RF CARD

DT607A/ID-S4DT607/ID/FE-S1 DT607/ID/FE-S2

DT607F/ID/FE-S4DT607/ID/FE-S3 DT607/ID/FE-S4

DT607 Series

2 WIRE SYSTEM

Fisheye door station with proximity access control

CONTENTS

PARTS AND FUNCTIONS..................................................................................... 3

Part Names............................................................................................................. 3

Mounting................................................................................................................. 4

BASIC FUNCTIONS .............................................................................................. 6

Unlock Operations.................................................................................................. 6

Fisheye Camera ..................................................................................................... 6

External Motion Detection ...................................................................................... 6

SETUP INSTRUCTIONS........................................................................................ 7

Functions Setting Up .............................................................................................. 7

Setting Door Station Address ................................................................................. 8

Setting Door Station Calling Mode ......................................................................... 8

Setting Camera Resolution.................................................................................... 10

Setting Unlock Mode ............................................................................................. 10

Setting Unlock Time............................................................................................... 11

Setting Nameplate Illumination Mode.................................................................... 11

Setting Night View LED Illumination Mode............................................................ 12

Setting Ring-back Tone ......................................................................................... 12

Setting Image Display Mode.................................................................................. 13

Registering ID Card............................................................................................... 14

WIRING ................................................................................................................. 17

Connecting Electric Lock....................................................................................... 17

Connecting Basic One-to-one ............................................................................... 18

Connecting Multi Door Stations............................................................................. 18

Connecting Multi Monitors..................................................................................... 19

APPENDIX ............................................................................................................ 21

Precautions............................................................................................................ 21

Specication .......................................................................................................... 21

Cables and Requirments....................................................................................... 22

-3-

Part Names

PARTS AND FUNCTIONS

[11]

[10]

[14]

[9]

[1]

[3]

[4]

[1]

[3]

[4]

[8]

[7]

[6]

[5]

[9]

[8]

[7]

[6]

[5]

[12]

[11]

[12]

[13]

[2]

Surface mounted

Flush mounted

[1] Microphone

[2] UNLOCK indicator

[3] CALL indicator

[4] Call button

[5] Nameplate

[6] Front panel

[7] Speaker

[8] Night view LED

[9] Camera lens

[10] Rainy cover

[11] Mounting hook

[12] Connection port

[13] Screw hole

[14] Mounting box

-4-

PARTS AND FUNCTIONS

Mounting

1 2 3 4 5

AcDbMLeader (ACDB_MLEADER_CLASS)

Rainy cover

The distance between

the top of main unit

and rain cover should

be not less than 3mm.

Main unit

≥3mm

1 2 3 4 5

AcDbMLeader (ACDB_MLEADER_CLASS)

1. Connect the cable correctly.

2. Drill holes in the wall to match the size of screw stoppers,then attach the rainy cover and

main unit to the wall, and the distance between the top of main unit and rain cover should be not

less than 3mm.

3. Install the name plate.

4. Attach the front panel to the main unit.

5. Use the special screwdriver and the screws to x the panel.

1. Drill a hole in the wall to match the size of mounting box,then attach the mounting box to the

wall.

2. Loosen the high screws to install the name plate.

3. Connect the cable correctly.

4. Attach the front panel to the mounting box,then use the special screwdriver and the screws to

x the panel.

5. Finish the installation.

Surface mounted

Flush mounted

The installation height is suggested to 145~160cm.

* The camera angle view of surface mount model may be less than 1700.

-5-

PARTS AND FUNCTIONS

Terminal description

Lock Control Jumper: To select the lock type.

Motion Detector Connect Port: To connect external PIR motion detector.

Main Connect Port: To connect the bus line and the electronic locks.

• L1,L2: Connect to the bus line, no polarity.

• PL: External lock power input, connect to the power positive(power +).

• S+: Lock power(+) output.

• S-: Lock power(-) output, connect to the power(-) input of locks(only when using the door

station to power the locks, if using the external power supply for the locks, the S- will not be

connected).

1 2 3

Lock Control Jumper

PIR Motion Detector

Connect Port

+12V

GND

PIR

L1 L2

S+ S-

Main Connect Port

-6-

BASIC FUNCTIONS

Unlock Operations

Unlocking of ID Card

When the registered user card has been shown to ID card window, the UNLOCK indicator lights

up, the buzzer sounds,and the electric door strike is unlocked.

• If show the authorized user card,the buzzer will sound of beep+,and the UNLOCK indicator

will light up.

• If show the unauthorized user card,the buzzer will sound of beep,beep,beep.

Fisheye Camera

External Motion Detection

Please note that this function requires the

monitor with sheye function to support.

The angle view is 1700,visitors in this angle

view can be seen clearly and can be zoomed

to see individuals up close via indoor monitor

with sheye function.

The door station is equipped with a terminal to

connect external motion detector.

If the external motion detector is connected

to the system,following functions will be effec-

tive:

If detect someone passing by, the door station

can be activated operation to unlock or turn

on light.

Standard

door station angle

DT607

1700door camera angle

(Wide angle view shown)

12V

Motion

detector

GND

PIR

* Please contact with supplier for more details about

detector connection.

-7-

SETUP INSTRUCTIONS

Functions Setting Up

KEY_1

KEY_2

KEY_3

KEY_4

KEY_SET

LED_UNLOCK

LED_TALK

LED_NAME

RF CARD

This section explains the settings of each

function,please refer to the following table:

To perform the settings for the function

you want,you should move away the metal

front panel. Please refer to the sketch

map.

Each operation is indicated by the lighting

up of the LED indicator on the unit, and by

the sounding of the buzzer.

Order Setting items Setting range Default value

1 Setting door station address 0~3 0

2Setting door station

calling mode Standard/Group calling mode Standard calling mode

3 Setting camera resolution High/Low High

4 Setting the unlock mode 0:opened/1:closed 0:opened

5 Setting the unlock time 01 to 99 seconds 1 seconds

6Setting the nameplate

illumination mode On/Off/Auto On

7Setting night view LED

illumination mode On/Off/Auto Auto

8 Setting ring-back tone

Ringing one time

Ring continuously

No ring-back tone

Ringing one time

9 Setting image display mode

Alternate switching mode

Zoom mode

Full screen mode

Alternate switching mode

-8-

Setting Door Station Address

Setting Door Station Calling Mode

Total 4 addresses can be congured. It can be modied either before or after installation.

0 is default, to change the setting, please follow the steps:

UNLOCK Indicator:OFF

TALK Indicator:OFF Buzzer Beep+, Beep

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep+

In standby mode, press

KEY_SET button once

Press KEY_1 button to set

the first door station.

Press KEY_2 button to set

the second door station.

Press KEY_3 button to set

the third door station.

Press KEY_4 button to set

the fourth door station.

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep,Beep

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep,Beep,Beep

UNLOCK Indicator:OFF

TALK Indicator:OFF

Buzzer Beep,Beep,Beep,Beep

ID=0,1st door station ID=1,2nd door station ID=2,3rd door station ID=3,4th door station

SETUP INSTRUCTIONS

• If setting mode has not been exited, you can change the address of door station by pressing KEY1~4

freely.

• The LED_NAME indicator will always blink until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

• In this step,press KEY_SET button four times to exit out the setting mode manually.

There are two calling modes for door station,Standard calling mode and Group calling mode.

Please know that the door station work in Standard calling mode by default.

-9-

• If setting mode has not been exited, you can change the calling mode by pressing KEY1 circularly.

• The LED_NAME indicator will blink all the time until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

• In this step,press KEY_SET button three times to exit out the setting mode manually.

SETUP INSTRUCTIONS

* More details about code setting for monitor, please refer to corresponding user manual .

Each call button will respond different addresses when set in different calling mode. Refer to the

followings for more informations.

Call buttonA: call the monitor with address 01 by default.

Call buttonB: call the monitor with address 02 by default.

Call buttonC: call the monitor with address 03 by default.

Call buttonD: call the monitor with address 04 by default.

Call buttonA: Call all monitors in group address from

00~15.(one of the monitor should be set to 00)

Call buttonB,C,D: Call all monitors in group address from

16~31. (one of the monitor should be set to 16)

UNLOCK Indicator:OFF

TALK Indicator:ON

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button twice.

UNLOCK Indicator:OFF

TALK Indicator:ON

Buzzer Beep+

Press KEY_1 button to

activate Standard calling

mode for door station.

UNLOCK Indicator:OFF

TALK Indicator:ON

Buzzer Beep, Beep

Press KEY_1 button again

to activate Group calling

mode for door station.

Press KEY_1

RF CARDRF CARD

A A

RF CARDRF CARD

1.Standard calling mode(Address range 01-04

by default)

2.Group calling mode

To change this setting, please follow the steps:

-10-

Setting Camera Resolution

Setting Unlock Mode

The resolution of the camera can be adjusted at any time, that means the quality of image on

screen can be set to high or low.

High resolution is default, to change the setting, please follow the steps:

There are 2 unlock modes, Normally opened and Normally closed.

Normally opened is default, to change the setting, please follow the steps:

UNLOCK Indicator:OFF

TALK Indicator:ON

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button twice.

UNLOCK Indicator:OFF

TALK Indicator:ON

Buzzer Beep+

Press KEY_2 button to set the

camera to High resolution.

UNLOCK Indicator:OFF

TALK Indicator:ON

Buzzer Beep, Beep

Press KEY_2 button again

to set the camera to Low

resolution.

Press KEY_2

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep+, Beep

In standby mode, press

KEY_SET button three

times.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep+

Press KEY_1 button to set

the unlock mode to

Normally opened.

UNLOCK Indicator:ON

TALK Indicator:OFF

Buzzer Beep, Beep

Press KEY_1 button again

to set the unlock mode to

Normally closed.

Press KEY_1

SETUP INSTRUCTIONS

• If setting mode has not been exited, you can change the camera resolution by pressing KEY2 circularly.

• The LED_NAME indicator will blink all the time until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

• In this step,press KEY_SET button three times to exit out the setting mode manually.

• If setting mode has not been exited, you can change the unlock mode by pressing KEY1 circularly.

• The LED_NAME indicator will blink all the time until exit out the setting mode.

• If without any operation in 10 seconds, it will exit out setting mode automatically.

• In this step,press KEY_SET button twice to exit out the setting mode manually.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere V-Tec Sicherheitssystem Handbücher

V-Tec

V-Tec VT584 Series Bedienungsanleitung

V-Tec

V-Tec DT27S-TD7 Bedienungsanleitung

V-Tec

V-Tec DT601 Bedienungsanleitung

V-Tec

V-Tec DT243-D4 Bedienungsanleitung

V-Tec

V-Tec DT607C Series Bedienungsanleitung

V-Tec

V-Tec D250 Bedienungsanleitung

V-Tec

V-Tec AT27SDTD7-V1 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung