V-tech CS5111-3 Bedienungsanleitung

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read the

Important safety instructions

on page 34 of this manual.

This manual has all the feature operations and troubleshooting necessary to install and operate

your new VTech telephone. Please review this manual thoroughly to ensure proper installation

and operation of this innovative and feature rich VTech product. For support, shopping, and

everything new at VTech, visit our website at www.vtechphones.com.

In Canada, please visit www.vtechcanada.com.

The ENERGY STAR®program (www.energystar.gov) recognizes and encourages

the use of products that save energy and help protect our environment. We are

proud to mark this product with the ENERGY STAR®label indicating it meets the

latest energy efficiency guidelines.

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identified with this logo have reduced noise and interference when

used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083

Compliant Logo is a trademark of the Telecommunications Industry Association.

Used under license.

www.vtechphones.com

Table of contents

Getting started . . . . . . . . . . . . . . . 1

Parts checklist . . . . . . . . . . . . . . . . 1

Telephone base and charger installation . . .2

Battery installation and charging . . . . . . . 3

Mounting bracket installation . . . . . . . . . 4

Handset layout . . . . . . . . . . . . . . . . 6

Telephone base layout . . . . . . . . . . . . 7

Telephone settings . . . . . . . . . . . . . 8

Date and time . . . . . . . . . . . . . . . . . 8

Ringer. . . . . . . . . . . . . . . . . . . . . 9

Ringer volume . . . . . . . . . . . . . . . . 9

Dial mode . . . . . . . . . . . . . . . . . . 10

Home area code . . . . . . . . . . . . . . 10

Language . . . . . . . . . . . . . . . . . . 11

Clear voicemail . . . . . . . . . . . . . . . 11

Telephone operation . . . . . . . . . . . 12

Make calls . . . . . . . . . . . . . . . . . 12

Answer calls . . . . . . . . . . . . . . . . 12

End calls . . . . . . . . . . . . . . . . . . 12

Volume . . . . . . . . . . . . . . . . . . . 12

Channel . . . . . . . . . . . . . . . . . . . 12

Call waiting . . . . . . . . . . . . . . . . . 13

Temporary tone dialing . . . . . . . . . . . 13

Redial . . . . . . . . . . . . . . . . . . . . 14

Find handset . . . . . . . . . . . . . . . . 14

Transfer an external call . . . . . . . . . . 15

Directory . . . . . . . . . . . . . . . . . . 16

Store a directory entry . . . . . . . . . . . 16

Character chart . . . . . . . . . . . . . . . 17

Review the directory . . . . . . . . . . . . 17

Edit a directory entry . . . . . . . . . . . . 18

Delete a directory entry . . . . . . . . . . . 19

Copy a directory entry into speed dial . . . 20

Dial a number from the directory . . . . . . 20

Speed dial . . . . . . . . . . . . . . . . . 21

Store a speed dial entry . . . . . . . . . . 21

Edit a speed dial entry . . . . . . . . . . . 22

Delete a speed dial entry . . . . . . . . . . 23

www.vtechphones.com iii

Table of contents

Dial a speed dial number . . . . . . . . . . 23

Reassign speed dial locations . . . . . . . 24

About caller ID . . . . . . . . . . . . . . . 25

Call log . . . . . . . . . . . . . . . . . . . 26

Review the call log . . . . . . . . . . . . . 27

Make call log entries ready to dial . . . . . 27

Dial a call log number. . . . . . . . . . . . 28

Save a call log entry to the directory . . . . 29

Delete from the call log . . . . . . . . . . . 30

Call log display screen messages . . . . . 31

Appendix. . . . . . . . . . . . . . . . . . 32

Handset display screen messages . . . . . 32

Battery . . . . . . . . . . . . . . . . . . . 33

Important safety instructions . . . . . . . . 34

Troubleshooting. . . . . . . . . . . . . . . 35

Operating range . . . . . . . . . . . . . . 44

Maintenance . . . . . . . . . . . . . . . . 44

About cordless telephones . . . . . . . . . 45

Warranty . . . . . . . . . . . . . . . . . . 45

FCC, ACTA and IC regulations . . . . . . . 47

The RBRC®seal . . . . . . . . . . . . . . 48

Technical specications . . . . . . . . . . 49

Index . . . . . . . . . . . . . . . . . . . . 50

www.vtechphones.com 1

Getting started Basic operation

Getting started

To purchase

replacement

batteries or power

adapters, visit our

website at www.

vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call 1 (800)

267-7377.

•

8. User’s manual

1. Handsets

(2 for CS5111-2,

3 for CS5111-3)

7. Telephone base with

mounting bracket

3. Telephone base

power adapter

2. Telephone line cord

6. Batteries

(2 for CS5111-2,

3 for CS5111-3)

5. Battery compartment

covers

(2 for CS5111-2,

3 for CS5111-3)

Parts checklist

Your telephone contains the following items. Save your sales receipt and original

packaging in case your telephone needs warranty service.

4. Chargers and charger adapters

(1 for CS5111-2,

2 for CS5111-3)

www.vtechphones.com

Getting started

Use only the

power adapters

supplied with this

product. To order

a replacement,

visit our website at

www.vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call 1 (800)

267-7377.

The power

adapters are

intended to be

correctly oriented

in a vertical

or oor mount

position. The

prongs are not

designed to hold

the plug in place

if it is plugged into

a ceiling or an

under-the-table/

cabinet outlet.

•

Telephone base

Telephone line cord

Electrical outlet

(not controlled by

a wall switch)

Telephone base

power adapter

Telephone

wall jack

DSL lter (not included)

required if you have

DSL high-speed

Internet service

Telephone base and charger installation

Install the telephone base and charger as shown below. Make sure that the

electrical outlet is not controlled by a wall switch. If you subscribe to high-speed

Internet service (Digital Subscriber Line - DSL) through your telephone lines,

you must install a DSL lter between the telephone base and the telephone

wall jack. The lter will prevent noise and caller ID problems caused by DSL

interference. Please contact your DSL service provider for more information

about DSL lters.

Charger

adapter

Charger

www.vtechphones.com 3

Getting started Basic operation

Getting started

If the handset will

not be used for

a long period of

time, remove the

battery to prevent

possible leakage.

To purchase a

replacement

battery, visit our

website at www.

vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call 1 (800)

267-7377.

•

Battery installation and charging

Install the battery as shown below. The battery may have enough charge for

short calls. For best performance, charge the battery for at least 16 hours before

use. When the battery power is low, LOW BATTERY will be displayed and will

ash on the handset screen. When fully charged, the handset battery provides

approximately ve hours of talk time or six days of standby time.

Insert the plug of the battery as indicated. Make sure it is plugged securely

and matches the color-coded label inside the battery compartment.

Place the battery with the label THIS SIDE UP facing up and the wires inside

the battery compartment.

Align the battery compartment cover at against the battery compartment,

then slide it upwards until it clicks into place.

Charge the handset by placing it in the telephone base or charger. The handset

charge light will be on when charging.

1234

www.vtechphones.com

Getting started

Mounting bracket installation

Your telephone base comes with the mounting

bracket installed, ready for desktop use. You may

also mount your telephone onto a standard telephone

wall plate.

Wall mounting bracket installation:

To prepare the telephone base for wall mounting,

you will need to remove the bracket if it is currently

attached for desktop use. Press on the tabs located

on the legs of the bracket to loosen, then lift the

bracket up and away from the telephone base.

First, insert the lower portion tabs of the mounting

bracket into the lower grooves in the telephone

base, then snap the upper portion tabs of the

mounting bracket into place.

Mount the telephone base on the wall by positioning

it so the mounting studs will t into the holes on the

telephone base and mounting bracket. Slide the

telephone base down on the mounting studs until

it locks into place.

To remove the bracket, press both upper portion

tabs rmly inward and pull the bracket downward

until it releases from the grooves.

AC7.5V

Mounting bracket in wall

mount orientation

upper grooves

upper portion tabs

lower

portion

tabs

Mounting bracket

lower groove

www.vtechphones.com 5

Getting started Basic operation

Getting started

Mounting bracket installation (continued)

Desktop/tabletop bracket installation:

Your telephone comes ready for table or desktop use. If you have repositioned

the bracket for wall mounting and now want to return to desktop use, follow these

steps:

Insert the lower portion tabs of the mounting bracket into the upper grooves

of the telephone base.

Snap the upper portion tabs of the bracket into place.

To remove the bracket, press both upper portion tabs rmly inward and pull

the bracket upward until it is released from the grooves.

AC 7.5V

www.vtechphones.com

Handset layout

Getting started

/VOL-/CID

• When the phone is not in use, press to review

the call log.

• Press and hold to adjust the ringer volume when

in idle mode.

• During a call, press to decrease the listening

volume. A double beep will sound at the lowest

setting.

• Press to scroll down while in programming

mode or reviewing the redial list.

PROG

• Press to enter programming mode while

the phone is not in use.

/FLASH

• Press to make or answer a call.

• During a call, press to receive an incoming

call when you receive a call waiting alert.

CHAN/REMOVE

• Switch to a clearer channel while on a call.

• Press and hold to delete all records in the

call log when the phone is not in use.

When reviewing the call log or redial list,

press to delete the desired record.

•

/VOL+/

• Press to display the directory when the phone

is not in use.

• Press and hold to adjust the ringer volume

when the telephone is not in use.

• During a call, press to increase the listening

volume. A double beep will sound when the

highest setting is reached.

Press to scroll up while in programming mode

or reviewing the redial list.

•

SELECT/X-FER

• Press to store a programming option or a

directory entry.

• During a call, press to transfer a call to

another handset.

OFF

• During a call, press to hang up.

• While the handset is ringing, press to silence

the ringer.

• Press and hold for two seconds when the

telephone is not in use to erase the MISSED

CALLS display.

• During programming, press to exit without

making changes.

REDIAL/PAUSE

• Press repeatedly to review the redial list .

• While dialing or entering numbers into the

directory, press to insert a dialing pause.

CHARGE light

• On when the handset is charging in the

telephone base or charger.

TONE*

• Press to switch to tone dialing temporarily

when using the pulse service (page 13).

•

Press repeatedly to display other dialing options

when reviewing the call log (page 27).

•

Press to use the CLR VOICEMAIL feature

from the main menu.

www.vtechphones.com 7

Getting started Basic operation

Getting started

Telephone base layout

FIND HANDSET

Press to page all handsets.•

IN USE light

Flashes when there is an incoming call.

On when the handset is in use.

•

VOICEMAIL light

Flashes when you have new voicemail from your

telephone company.

•

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere V-tech Schnurloses Telefon Handbücher

V-tech

V-tech DS6520-22 Bedienungsanleitung

V-tech

V-tech CS6114 Bedienungsanleitung

V-tech

V-tech gz2437 Bedienungsanleitung

V-tech

V-tech VT 1932 Bedienungsanleitung

V-tech

V-tech t2101 Benutzerhandbuch

V-tech

V-tech TeleZapper VT 2568 Bedienungsanleitung

V-tech

V-tech VC7151-102A Bedienungsanleitung

V-tech

V-tech T2440 - 2.4GHz Dual Handset Cordless System Bedienungsanleitung

V-tech

V-tech CS6719 Bedienungsanleitung

V-tech

V-tech 2121 Bedienungsanleitung

V-tech

V-tech t2429 - 2.4 GHz Analog Cordless Phone Benutzerhandbuch

V-tech

V-tech T2351 Benutzerhandbuch

V-tech

V-tech PMX-S5410 Bedienungsanleitung

V-tech

V-tech CS6120-2 Bedienungsanleitung

V-tech

V-tech LS5105 - Cordless Extension Handset Bedienungsanleitung

V-tech

V-tech CS5121-3 Bedienungsanleitung

V-tech

V-tech DS6670-6C Bedienungsanleitung

V-tech

V-tech CS6829 Bedienungsanleitung

V-tech

V-tech DS3101 Bedienungsanleitung

V-tech

V-tech MI6889 Bedienungsanleitung

V-tech

V-tech i6767 - 5.8 Digital GHz Two Handset Cordless Phone... Bedienungsanleitung

V-tech

V-tech vt2498 Bedienungsanleitung

V-tech

V-tech IS7121-22 Bedienungsanleitung

V-tech

V-tech DS6121 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Furuno

Furuno FM-4721 Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch