V-tech Gz2336 Bedienungsanleitung

www.vtechphones.com

Table of contents

Getting started . . . . . . . . . . . . . . . . . . . . . 4

Parts checklist . . . . . . . . . . . . . . . . . . . . . 4

Installation . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing handset battery . . . . . . . . . . . . . . . 5

Low battery warning . . . . . . . . . . . . . . . . . . 6

Choose a location . . . . . . . . . . . . . . . . . . . 6

If you subscribe to DSL service . . . . . . . . . . . . 7

Connection . . . . . . . . . . . . . . . . . . . . . . . 7

Removable handset and base plates . . . . . . . . . 8

Handset features . . . . . . . . . . . . . . . . . . . . . 9

Base features . . . . . . . . . . . . . . . . . . . . . . 10

Basic operation . . . . . . . . . . . . . . . . . . . . 11

Set handset ringer . . . . . . . . . . . . . . . . . . 11

Set date and time . . . . . . . . . . . . . . . . . . 11

Telephone operation . . . . . . . . . . . . . . . . . . 12

Dial mode . . . . . . . . . . . . . . . . . . . . . . 12

Temporary tone dialing . . . . . . . . . . . . . . . 12

Language . . . . . . . . . . . . . . . . . . . . . . 13

Operating range . . . . . . . . . . . . . . . . . . . 13

Displaying screen messages . . . . . . . . . . . . 14

Speed dial . . . . . . . . . . . . . . . . . . . . . . . 15

Store a speed dial entry . . . . . . . . . . . . . . . 15

Delete a speed dial entry . . . . . . . . . . . . . . 17

Dial a speed dial number . . . . . . . . . . . . . . 18

Re-assign speed dial locations . . . . . . . . . . . 18

Directory . . . . . . . . . . . . . . . . . . . . . . . . 19

Store a directory entry . . . . . . . . . . . . . . . . 19

Edit a directory entry. . . . . . . . . . . . . . . . . 21

Delete a directory entry . . . . . . . . . . . . . . . 21

Dial a directory number . . . . . . . . . . . . . . . 22

Move a directory entry to speed dial. . . . . . . . . 23

Caller ID . . . . . . . . . . . . . . . . . . . . . . . . 24

Call log . . . . . . . . . . . . . . . . . . . . . . . . 24

Review call log . . . . . . . . . . . . . . . . . . . . 24

Remove records from call history . . . . . . . . . . 25

Dial a displayed number . . . . . . . . . . . . . . . 25

Store a call log entry in the directory . . . . . . . . 25

Display screen messages . . . . . . . . . . . . . . 26

Ringer options . . . . . . . . . . . . . . . . . . . . . 27

Headset operation . . . . . . . . . . . . . . . . . . . 28

Belt clip. . . . . . . . . . . . . . . . . . . . . . . . 28

Additional information . . . . . . . . . . . . . . . . 29

Troubleshooting . . . . . . . . . . . . . . . . . . . . 29

Maintenance . . . . . . . . . . . . . . . . . . . . . . 36

Warranty . . . . . . . . . . . . . . . . . . . . . . . . 36

Important safety instructions . . . . . . . . . . . . . . 37

FCC, ACTA and IC regulations . . . . . . . . . . . . . 38

The RBRC®Seal . . . . . . . . . . . . . . . . . . . . 40

Technical specications . . . . . . . . . . . . . . . . 41

Index . . . . . . . . . . . . . . . . . . . . . . . . . . 42

NEED HELP?

This manual has all the feature operations and troubleshooting you need to

install and operate your new VTech telephone. Please take the time to review

thoroughly to ensure proper installation of this VTech innovative and feature

rich product. You can also visit our website at www.vtechphones.com for

support, shopping, and everything new at VTech.

In Canada, please visit www.vtechcanada.com.

VTech toll free 1-800-595-9511

In Canada dial 1-800-267-7377

www.vtechphones.com

Before you begin

1. Base unit

2. Handset

3. Color handset brackets and

base plates

4. AC power adaptor

5. Belt clip

6. Telephone line cord

7. Battery

8. User’s manual

9. Battery compartment cover

To purchase replacement batteries,

visit us on the web at www.

vtechphones.com or call VTech

Communications, Inc. at 1-800-

595-9511. In Canada, contact

V Te c h Tel ec o mm un i ca ti o ns

Canada Ltd. at www.vtechcanada.

com or 1-800-267-7377.

Parts checklist:

• Important!

Before using

this telephone,

you must read

Important

safety

instructions on

pages 37-38.

1. Base unit 2. Handset

7. Battery

5. Belt clip

4. AC Power adaptor

8. User’s manual

3. Color handset brackets

and base plates

6.Telephone line cord

9. Battery

compartment cover

www.vtechphones.com 5

Getting started

Installation

Installing handset battery

1. Plug the battery connector securely into the jack inside the battery compartment according to the

color-coded label.

2. Insert battery in the center of the battery compartment.

3 Press down on the wired side until the battery securely snaps into place.

4. Neatly tuck the wires inside the battery compartment.

5. Position the battery compartment cover and slide it towards the unit until it clicks into place.

6. Put the handset in the base unit to start charging the new battery for at least 16 hours.

7. After the battery is fully charged, press ON on the handset and you should hear a dial tone.

• Use only the

VTech battery

and AC power

adaptor

supplied with

this telephone.

• Recharging of

a fully depleted

battery may take

up to 16 hours.

A fully charged

battery could

provide up to

5 hours of talk

time, or up to 5

days of standby

time.

• Place the

handset in the

base unit when

not in use to

ensure optimum

performance.

 









www.vtechphones.com

• If the phone will

not be used for

a long period of

time, remove the

battery to prevent

possible leakage.

• If you have any

trouble installing

your phone,

please refer to the

troubleshooting

section near the

end of this manual.

• Use only the

VTech battery and

AC power adaptor

supplied with this

telephone.

• if you need to

install your phone

within the same

room as other

cordless phones

or wireless

products, you may

need to select a

different channel

for your router

and or change the

channel on your

phone’s handsets.

Low battery warning

When in low battery mode, the LOW BATTERY icon will be on and an alarm will sound until the

handset is returned to the base unit for recharging. LOW BATTERY will display on the handset when

the battery is low, depleted, or when there is no electrical contact between the battery and handset.

When the battery has been charged, these features will return to normal.

A low battery warning indicates one of the following:

1. There is no battery in your handset. The supplied battery must be installed in the handset.

2. The battery needs to be replaced, or

3. The battery is installed incorrectly. Re-install according to the instructions on page 5.

Installation

Choose a location

For optimum performance of your cordless telephone

system:

1. Choose a central location for your base unit.

2. Install your phone(s) as far away as possible from

any other cordless (wireless) device such as cordless

telephones, 802.11 wireless router (for example, WiFi).

3. Install your phone(s) as far away as possible from

other electronic equipment such as microwave ovens,

televisions, computers, etc.

4. Install your telephone equipment away from heat sources

and direct sunlight.

5. Avoid excessive moisture, dust or extreme cold.

www.vtechphones.com 7

Getting started

Installation

If you subscribe to DSL service

If there is interference during telephone conversations and/or your caller ID features are not functioning

properly, install a noise lter to the telephone line between the base unit and the telephone wall jack.

Contact your DSL provider for a noise lter.

To single-line

telephone jack(RJ11C)

Telephone line cord Noise lter (optional)

(For DSL users)

To power outlet

AC power adaptor

Connection

1. Choose a location for the base near an electrical outlet and telephone jack.

2. Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit.

Then plug the adaptor into a standard electrical outlet (110V AC) not controlled by a wall switch.

3. Connect the telephone line cord to the jack at the bottom of the base unit, and the other end to

the wall jack.

www.vtechphones.com

Installation

Removable handset and base

plates

Your phone comes with additional handset

brackets a nd base pl ates of vario u s

colors. These brackets and plates are

interchangeable to suit your mood or room

decor.

Handset brackets

1. Carefully remove the handset’s top

bracket and/or bottom bracket by pressing

inward towards the center of the phone,

then pull the bracket off slowly.

2. Attach the new top bracket and/or bottom

bracket by aligning the two sides of the

plate with the slots on the phone. Gently

push the brackets towards the center

of the phone until it locks securely into

place.

Base plate

1. Carefully remove the base plate by

inserting your thumb in the slot just below

the FIND HANDSET button and lift the

color plate from the base.

2. Align the tabs on the back of the new base

plate with the appropriate openings in the

base unit and then align the two front tabs

before snapping the plate into position.

www.vtechphones.com 9

Basic operation

Handset features

( /DIR VOL+)

• When the phone is not in use, press

to display directory entries.

• Press & hold for 2 seconds during

idle mode to adjust ringer volume.

A double beep will sound when the

highest setting is reached.

• During a call, press to increase

listening volume. A double beep will

sound when the highest setting is

reached.

TALK

• Press this button before dialing the number

to make a call.

-OR-

Dial the number (use to backspace and

correct digits), then press this button to

make a call.

• Press any key except OFF, CID/VOL-,

DIR/VOL+ to answer a call.

• While on a call, when there is a call waiting

alert, press this button to take the new call,

then press this button again to return to the

original call.

• When the phone is in use, this button will

glow steadily.

OFF

• During a call, press to hang up.

• While the handset is ringing, press

to silence the ringer.

• Press and hold for two seconds

while in idle mode to erase the

MISSED CALLS display.

• During programming, press to exit

without making changes.

(CID/VOL-)

• When the phone is not in use, press to

display caller ID information.

• Press and hold for two seconds while in idle

mode to adjust ringer volume. A double beep

will sound at the lowest setting.

• During a call, press to lower listening vol-

ume. A double beep will sound at the lowest

setting.

SELECT

• Press to store a programming op-

tion, or to store a directory entry.

PROG

• Press to enter programming mode while

the handset is idle (off).

REDIAL/PAUSE

• Press TALK, then press this button

to call the last number dialed.

-OR-

Press this button, then press TALK

to call the last number dialed.

• While handset is not in use, press

this button twice to delete the last

number dialed from this telephone.

• While dialing or entering numbers

into the directory, press to insert a

four-second dialing pause.

CHAN/REMOVE

• Switch to a clear channel while on a call.

• While handset is not in use, press and hold

to delete all records in the call log.

When viewing the call log, press to delete

the current record.

www.vtechphones.com

Base features

FIND HANDSET

Press to page the handset for up to 60 seconds.

Press again, press OFF, or place the handset in

its base to cancel the page.

CHARGE/IN USE Indicator

• Flashes when the handset is in use.

• Flashes in unison with incoming ringing.

• Flashes when the battery is low, depleted, or when

there is no electrical contact between the battery and

the handset.

• On steadily when the handset is charging in the base.

Andere Handbücher für gz2336

Inhaltsverzeichnis

Andere V-tech Schnurloses Telefon Handbücher

V-tech

V-tech gz 2334 Benutzerhandbuch

V-tech

V-tech DS6221 Bedienungsanleitung

V-tech

V-tech DS6641 Bedienungsanleitung

V-tech

V-tech CS6919 Bedienungsanleitung

V-tech

V-tech DS6621 Bedienungsanleitung

V-tech

V-tech DL72210 Bedienungsanleitung

V-tech

V-tech 921 ADL Bedienungsanleitung

V-tech

V-tech TD43996974 - 5.8GHz Accessory Handset Bedienungsanleitung

V-tech

V-tech CS5121 Bedienungsanleitung

V-tech

V-tech CD1103 Bedienungsanleitung

V-tech

V-tech CS6124 Bedienungsanleitung

V-tech

V-tech T2340 - 2.4 GHz Dual Handset System Bedienungsanleitung

V-tech

V-tech IS6100 Bedienungsanleitung

V-tech

V-tech vt 1030 - V-tech Microphone Unidirectional Bedienungsanleitung

V-tech

V-tech 2498 - VT Cordless Phone Bedienungsanleitung

V-tech

V-tech IA5879 - Cordless Phone - Operation Bedienungsanleitung

V-tech

V-tech CS6719-4 Bedienungsanleitung

V-tech

V-tech DS6161 Bedienungsanleitung

V-tech

V-tech USB 7200 Bedienungsanleitung

V-tech

V-tech FS6214 Bedienungsanleitung

V-tech

V-tech FS6220-2 Bedienungsanleitung

V-tech

V-tech CS6519 Bedienungsanleitung

V-tech

V-tech Tropez 1064 XL Bedienungsanleitung

V-tech

V-tech i6735 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Furuno

Furuno FM-4721 Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

V-tech gz2336 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken