V-tech VONAGE IP8100 Series Bedienungsanleitung

IP8100 series Quick Start Guide

www.vonage.com/vtech

The IP8100 series telephone is an advanced broadband cordless telephone set, capable of supporting up to

four handsets.

Your package contains:

1. Base Unit 6. Charger Wall Mounting Bracket(s)

2. Handset(s) 7. Belt Clip(s)

3. Handset Charger(s) 8. User Documentation CD

4. Ethernet Cables 9. Quick Start Guide

5. Base Power Adapter 10. Battery(ies)

Parts Check List

Base Unit

Handset

Blue Ethernet Cable

Charger Wall

Mounting Bracket

User Documentation

Handset Charger

Base AC Power Adapter

Belt Clip

Battery

Quick Start Guide

Yellow Ethernet Cable

i : Your broadband telephone accommodates up to 4 handsets. You can add new handset, model# IP811, by

visiting www.vtechphones.com

IP8100 series Quick Start Guide

Getting Started

Installation of Batteries in Handset

Follow the steps below:

1. Place the new battery in the handset and align

the two holes in the plug with the socket pins to

snap the plug into place.

2. Replace the battery cover by sliding it upwards.

3. If the new batteries are not already charged,

place the handset in its charger, and allow it to

charge for 10-12 hours. After initial charge, a

maintenance charge of 8 hours should be sufficient.

NOTE: Use VTech battery 80-5808-00-00 or VTech

Replacement 89-1324-00-00. To purchase replacement batteries,

visit us on the web at www.vtechphones.com or call VTech Communications, Inc. at 800-595-9511.

Charging of the Handset Batteries

The handset of your cordless telephone is powered

by rechargeable batteries. It charges automatically

whenever handset is in its charger.

You should charge the batteries for 10-12 hours

when you ﬁrst receive your phone. You will know

the batteries need charging when:

• The low battery message is displayed.

• The handset seems completely dead, the LCD

is completely clear and does not activate

when you press the keys.

• I M P ORTANT •

BEFORE YOU BEGIN: Make sure that you have installed and fully charged the handset batteries.

IP8100 series Quick Start Guide

Getting Started

Pre-Installation

Answer the following questions for the instructions that are appropriate for you.

Do you have a stand-alone router?

If yes, please use the instructions on page 7.

Helpful Hint: Do you have more than one computer connected to the Internet? If so,

you have a router.

Do you have a modem with a built in router?

If yes, please use the instructions on page 9.

Helpful Hint: Some Internet Service Providers (ISP) supply combinations modem/

routers. Please look on the back of your modem, if it has multiple ports, it is a modem with

a built in router. If you are not sure, please call your ISP and ask them if it is a standard

modem or a modem with a built in router and follow the appropriate instructions.

If the answer is no to both questions, continue on page 4.

Helpful Hint: If you purchased this VTech broadband phone from a retail store, you

need to activate your device at www.vonage.com/activate.

DSL or Cable Modem

INTERNET

Base Unit

Handset 1 & 2

NOTE: The IP8100 series telephone is expandable up to

a total of 4 handsets. Uses model IP 811 (sold separately)

WAN Port

Installation Without A Router

Warning: Do not route the ethernet cable to outdoors, and ensure that you are using a safety approved

DSL or Cable modem with proper electrical isolation.

PC/LAN Port

STEP 1

Unplug the power cord from your Cable or DSL modem (the device your ISP provided which provides high-speed

Internet). Make sure that you turn your computer off and that you do NOT plug in your broadband telephone until

instructed to do so.

Helpful Hint: The modem should be powered off for at least 10 minutes. If it is turned off for a shorter period

of time, it may “remember” old information that will prevent it from working properly.

IP8100 series Quick Start Guide

Installation Without A Router

STEP 4

Connect one end of the blue ethernet cable to the blue port, labeled “WAN,” located on the back of the base unit and

connect the other end of the blue cable to the ethernet port on your cable or DSL modem.

STEP 5

Reconnect power cord to the modem then turn the modem on. Please wait until all lights on the modem stop blinking.

Helpful Hint: This should take a few minutes, but may take as long as 10 minutes.

STEP 6

Plug the power cord into the power port located on the bottom or your IP8100 series telephone and the other end into

the electrical outlet. This turns the IP8100 series broadband telephone on.

Helpful Hint: DO NOT interrupt this registration process by unplugging the power or by using the handsets

until the READY indicator light on the front of base has gone from ﬂashing yellow to a steady green.

Helpful Hint: Use only the power cord provided in this package; using an older power cord can damage the

broadband telephone.

STEP 7

Turn your computer on, and check your computer to see if your Internet is working, try to visit any website. If your

Internet is working, please proceed to STEP 9. If not, please proceed to STEP 8.

STEP 2

Disconnect all cables between your Cable or DSL modem and your computer.

STEP 3

Connect one end of the yellow ethernet cable to the yellow port, labeled “PC/LAN,” located on the back of the base

unit and connect the other end of the yellow cable to the ethernet port of your computer.

STEP 8:

Cable Users

If you receive Internet access through a Cable modem, you may need to register the IP8100 series telephone with

your ISP. Please contact them to update your information; you will likely need your WAN MAC address, which is

located on the bottom of the IP8100 series telephone. Once your ISP has updated your account, proceed to step 9.

-- OR --

Installation Without A Router cont’

DSL Users

If you have DSL and are required to enter a user name and password (PPPoE) when accessing the Internet, you may

be required to authenticate the IP8100 series telephone.

A. Open a web browser such as Microsoft ®Internet Explorer using the computer connected through your

IP8100 series telephone ethernet port. In the address of location ﬁeld, type <http://192.168.15.1> and

press ENTER. This displays the login screen. Enter the default password ‘VTech’ and click on login.

B. On the Setup Wizard screen, click Run Wizard to start the set-up.

C. Follow Wizard screens to complete the setup.

STEP 9:

Check for dial tone by pressing the ON button on your handset. If you do not hear a dial tone, please refer to the

Troubleshooting section of the user manual.

Congratulations! Even if you are transferring your number, you are ready to start taking advantage of the great sav-

ings and superior quality of Vonage right now! Please call 800-342-1791 to setup your voicemail service and to learn

about other free Vonage features included with every Vonage calling plan.

DSL or Cable Modem

INTERNET

Existing

Network Router

Laptop

Base Unit

Handset 1 & 2

NOTE: The IP 8100 series telephone is expandable up to

a total of 4 handsets. Uses model IP 811 (sold separately)

WAN Port

IP8100 series Quick Start Guide

Warning: Do not route the ethernet cable to outdoors, and ensure that you are using a safety approved DSL or

Cable modem with proper electrical isolation.

Installation With A Router

IP8100 series Quick Start Guide

Installation With A Router

STEP 1:

Using the blue ethernet cable provided, connect one end into the blue port, labeled “WAN,” located on the back of the

IP8100 series broadband telephone base unit and connect the other end into an available LAN port on your router.

If you have a wireless router, place the base unit at least 3’ away from your router to avoid interference.

Helpful Hint: If all the ethernet ports on your existing router are full, disconnect one of the attached devices

from the existing router. Plug the blue ethernet cable into the now free port on your router. Connect the device

you just unplugged from your router to the yellow “PC/LAN” port located on the back of IP8100 series broadband

telephone base unit.

STEP 2:

Plug the power cord into the power port located on the bottom of your base unit and the other end into the electrical

outlet. This turns the IP8100 series broadband telephone on.

Helpful Hint: DO NOT interrupt this registration process by unplugging the power or by using the handsets until

the READY indicator light on the front of base has gone from ﬂashing yellow to a steady green.

Helpful Hint: Use only the power cord provided in this package; using an older power cord can damage the

broadband phone.

STEP 3:

Check for dial tone by pressing the ON button on your handset. If you do not hear a dial tone, please refer to the

Troubleshooting section of the user manual.

Congratulations! Even if you are transferring your number, you are ready to start taking advantage of the great sav-

ings and superior quality of Vonage right now! Please call 800-342-1791 to setup your voicemail service and to learn

about other free Vonage features included with every Vonage calling plan.

DSL or Cable Modem

INTERNET

Laptop

Base Unit

Handset 1 & 2

NOTE: The IP8100 series telephone is expandable up to

a total of 4 handsets. Uses model IP 811 (sold separately)

WAN Port

IP8100 series Quick Start Guide

Warning: Do not route the ethernet cable to outdoors, and ensure that you are using a safety approved DSL or

Cable modem with proper electrical isolation.

Installation With A Modem Router

Andere Handbücher für VONAGE IP8100 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere V-tech Schnurloses Telefon Handbücher

V-tech

V-tech ia5865 Bedienungsanleitung

V-tech

V-tech CS5319-15 Bedienungsanleitung

V-tech

V-tech CS6519 Bedienungsanleitung

V-tech

V-tech I5808 - Cordless Extension Handset Bedienungsanleitung

V-tech

V-tech vt9113 Bedienungsanleitung

V-tech

V-tech ia5870 Bedienungsanleitung

V-tech

V-tech vt2498 Bedienungsanleitung

V-tech

V-tech ia5829 - Cordless Phone - Operation Bedienungsanleitung

V-tech

V-tech CD1103 Bedienungsanleitung

V-tech

V-tech Smart Home-Phone Bedienungsanleitung

V-tech

V-tech 9126 Bedienungsanleitung

V-tech

V-tech CS6120-2 Bedienungsanleitung

V-tech

V-tech vt9030 Bedienungsanleitung

V-tech

V-tech CS6629-4 Bedienungsanleitung

V-tech

V-tech CareLine SN1196 Bedienungsanleitung

V-tech

V-tech i 5871 Bedienungsanleitung

V-tech

V-tech CS6648-2 Bedienungsanleitung

V-tech

V-tech ia5829 - Cordless Phone - Operation Bedienungsanleitung

V-tech

V-tech FS6220-2 Bedienungsanleitung

V-tech

V-tech CS5129 Bedienungsanleitung

V-tech

V-tech vt9141 Bedienungsanleitung

V-tech

V-tech MI6821 - Cordless Telephone With Caller Id Bedienungsanleitung

V-tech

V-tech Cordless Telephone Bedienungsanleitung

V-tech

V-tech FS6220-2 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung