V-tech ErisTerminal VDP801 Bedienungsanleitung

ErisTerminal®SIP DECT Cordless Color Handset

VDP801

Quick Start Guide

DRAFT

Important Safety Information

This symbol is to alert you to important operating or servicing

instructions that may appear on the product or in this user’s

manual. Always follow basic safety precautions when using

this product to reduce the risk of injury, re, or electric shock.

Important Safety Instructions

When using your telephone equipment, basic safety precautions

should always be followed to reduce the risk of re, electric shock and

injury, including the following:

1. This product should be installed by a qualied technician.

2. This product should only be connected to the host equipment and

never directly to the network such as Public Switch Telephone

Network (PSTN) or Plain Old Telephone Services (POTS).

3. Read and understand all instructions.

4. Follow all warnings and instructions marked on the product.

5. Unplug this product from the wall outlet before cleaning. Do not

use liquid or aerosol cleaners. Use a damp cloth for cleaning.

6. Do not use this product near water such as near a bath tub, wash

bowl, kitchen sink, laundry tub or swimming pool, or in a wet

basement or shower.

7. Do not place this product on an unstable table, shelf, stand or

other unstable surfaces.

8. Slots and openings in the back or bottom of the base station

and handset are provided for ventilation. To protect them from

overheating, these openings must not be blocked by placing the

product on a soft surface such as a bed, sofa or rug. This product

should never be placed near or over a radiator or heat register.

This product should not be placed in any area where proper

ventilation is not provided.

9. This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

type of power supplied at the premises, consult your dealer or

local power company.

10. Do not allow anything to rest on the power cord. Do not install

DRAFT

this product where the cord may be walked on.

11. Never push objects of any kind into this product through the

slots in the base station or handset because they may touch

dangerous voltage points or create a short circuit. Never spill

liquid of any kind on the product.

12. To reduce the risk of electric shock, do not disassemble this

product, but take it to an authorized service facility. Opening or

removing parts of the base station or handset other than specied

access doors may expose you to dangerous voltages or other

risks. Incorrect reassembling can cause electric shock when the

product is subsequently used.

13. Do not overload wall outlets and extension cords.

14. Unplug this product from the wall outlet and refer servicing to an

authorized service facility under the following conditions:

A. When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled onto the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following

the operating instructions. Adjust only those controls that are

covered by the operation instructions. Improper adjustment

of other controls may result in damage and often requires

extensive work by an authorized technician to restore the

product to normal operation.

E. If the product has been dropped and the telephone base

and/or handset has been damaged.

F. If the product exhibits a distinct change in performance.

15. Avoid using a telephone (other than cordless) during an electrical

storm. There is a remote risk of electric shock from lightning.

16. Do not use the telephone to report a gas leak in the vicinity of the

leak. Under certain circumstances, a spark may be created when

the adapter is plugged into the power outlet, or when the handset

is replaced in its cradle. This is a common event associated with

the closing of any electrical circuit. The user should not plug

the phone into a power outlet, and should not put a charged

handset into the cradle, if the phone is located in an environment

containing concentrations of ammable or ame-supporting

gases, unless there is adequate ventilation.

DRAFT

A spark in such an environment could create a re or explosion.

Such environments might include: medical use of oxygen without

adequate ventilation; industrial gases (cleaning solvents; gasoline

vapors; etc.); a leak of natural gas; etc.

17. Only put the handset of your telephone next to your ear when it is

in normal talk mode.

18. The power adapters are intended to be correctly oriented in a

vertical or oor mount position. The prongs are not designed to

hold the plug in place if it is plugged into a ceiling, under-the-table

or cabinet outlet.

19. Use only the power cord indicated in this manual.

20. For pluggable equipment, the socket-outlet shall be installed near

the equipment and shall be easily accessible.

21. In wall mounting position, make sure to mount the telephone

base on the wall by aligning the eyelets with the mounting

studs of the wall plate. Then slide the telephone base down on

both mounting studs until it locks into place. Refer to the full

installation instructions in the User Guide.

22. CAUTION: Keep small metallic objects such as pins and staples

away from the handset receiver.

SAVE THESE INSTRUCTIONS

DRAFT

Compliance

FCC part 15

This device complies with Part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits

of a Class B digital device, pursuant to Part 15 of FCC rules. These

limits are designed to provide reasonable protection against harmful

interference in residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that

interference will not occur in a particular installation; if this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o󰀨 and on, you are

encouraged to try to correct the interference by one of the following

measures:

1. Reorient or relocate the receiving television or radio antenna.

2. Increase the separation between the telephone equipment and

the receiver.)

3. Connect the telephone equipment into an outlet on a circuit

di󰀨erent from that to which the television, radio or other receiver

is connected.

4. Consult the dealer or an experienced Radio/TV Technician for

help.

Privacy of communications may not be ensured when using this phone.

Warning: Changes or modications to this equipment not expressly

approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

Caution: To maintain the compliance with the FCC’s RF exposure

guideline, place the base unit at least 20 cm from nearby persons.

For body-worn operation, this handset has been tested and meets the

FCC RF exposure guidelines when used with the accessories supplied

or designated for this product. Use of other accessories may not ensure

compliance with FCC RF exposure guidelines.

DRAFT

Industry Canada

This Class B digital apparatus complies with Canadian requirements:

CAN ICES-3 (B)/NMB-3(B).

Cet appareil numérique de la classe B est conforme à la norme CAN

ICES-3 (B)/NMB-3(B) du Canada.

This device complies with Industry Canada license-exempt RSS

standard(s).

Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation of the device.

Privacy of communications may not be ensured when using this

telephone.

The term ‘’IC:‘’ before the certication/registration number only

signies that the Industry Canada technical specications were met.

This product meets the applicable Innovation, Science and Economic

Development Canada technical specications.

DRAFT

Parts Checklist

Your package contains the following items. Save your sales receipt

and original packaging in the event warranty service is necessary.

About this Guide

This quick start guide provides a reference for the external features of

the base station and handset and basic installation instructions.

Please refer to the VDP800/VDP801 User Guide for complete

installation and operation instructions. You can download the guide

from businessphones.vtech.com.

For customer service or product information, visit our website at

businessphones.vtech.com or call 1 (888) 370-2006.

Quick Start Guide Handset charger

DC adapter

Handset

charger

Handset battery

and battery

compartment

cover

Belt clip

Ethernet

cable

Quick start guide

DRAFT

MENULINK

HANDSET 1

18:08 02/11

MENULINK

HANDSET 1

18:08 02/11

Quick Reference Guide

Cordless handset external features

End call & cancel

Signal Strength

Fuction key line,

context-sensitive

Microphone

While in a call:

Volume +

While in a menu:

Scroll up

On back:

• BELT CLIP

• SPEAKER

Mute microphone

2 context-sensitive

function keys

Speakerphone

(on/o󰀨)

Battery charging

status

Dial pad and audio controls

Message

(MWI) LED

Loudspeaker

Settings menu

OK/Select

Accept Calls

Dial pad

REDIAL



While in a call:

Volume -

While in a menu:

Scroll down

DRAFT

Handset Installation

This section assumes that your network infrastructure is established

and that your IP PBX phone service has been ordered and congured

for your location.

For more information about IP PBX conguration, see the VDP800/

VDP801 Administrator and Provisioning Manual, available at

businessphones.vtech.com.

Handset installation involves both the the handset and the handset

charger. The charger is powered using the supplied power adapter. The

charger can be placed on a at surface or mounted on a wall.

Avoid placing the handset and charger too close to:

• Communication devices such as television sets, DVD players, or

other cordless telephones

• Excessive heat sources

• Noise sources such as a window with tra󰀩c outside, motors,

microwave ovens, refrigerators, or uorescent lighting

• Excessive dust sources such as a workshop or garage

• Excessive moisture

• Extremely low temperature

• Mechanical vibration or shock such as on top of a washing

machine or work bench

DRAFT

Installing the charger

Install the charger as shown below.

Plug the power adapter into an electrical outlet not controlled by a

wall switch.

DRAFT

Inhaltsverzeichnis

Andere V-tech Mobilteil Handbücher

V-tech

V-tech Five Handset Expandable Cordless Phone System with BLUETOOTHA Wireless... Bedienungsanleitung

V-tech

V-tech DS6751 Bedienungsanleitung

V-tech

V-tech i5803 - Cordless Extension Handset Bedienungsanleitung

V-tech

V-tech vt2422 Bedienungsanleitung

V-tech

V-tech i 5807 Bedienungsanleitung

V-tech

V-tech DS6600 Bedienungsanleitung

V-tech

V-tech Dect 6.0 DS6211 Bedienungsanleitung

V-tech

V-tech USB 711 Bedienungsanleitung

V-tech

V-tech CTM-A2116 Bedienungsanleitung

V-tech

V-tech SN5307 Bedienungsanleitung

V-tech

V-tech DS6421 Bedienungsanleitung

V-tech

V-tech DS6601 Bedienungsanleitung

V-tech

V-tech USB7050 Bedienungsanleitung

V-tech

V-tech VSP600 Bedienungsanleitung

V-tech

V-tech LS5105 - Cordless Extension Handset Bedienungsanleitung

V-tech

V-tech CS6719-2 Bedienungsanleitung

V-tech

V-tech Analog Contemporary Series Bedienungsanleitung

V-tech

V-tech DS6250 Bedienungsanleitung

V-tech

V-tech IS7101 Bedienungsanleitung

V-tech

V-tech I5808 - Cordless Extension Handset Bedienungsanleitung

V-tech

V-tech CL6527A Bedienungsanleitung

V-tech

V-tech LS6204 - Cordless Extension Handset Bedienungsanleitung

V-tech

V-tech I5808 - Cordless Extension Handset Benutzerhandbuch

V-tech

V-tech DS8141 Bedienungsanleitung

Beliebte Mobilteil Handbücher anderer Marken

Swissvoice

Swissvoice ePure HD Bedienungsanleitung

Philips

Philips TD6736/BH051P Bedienungsanleitung

ASCOM

ASCOM I62 - Bedienungsanleitung

LG-Ericsson

LG-Ericsson LIP-9010 Bedienungsanleitung

GE 1583 Bedienungsanleitung

iiNet

iiNet Handset Bedienungsanleitung

ASCOM

ASCOM 9p23 Bedienungsanleitung

AT&T

AT&T DLP70110 Bedienungsanleitung

AirCell

AirCell ST 3100 Bedienungsanleitung

Eaton

Eaton HHIR-LCD-PROG Montageanleitung

Mitel

Mitel 112 Bedienungsanleitung

SBC

SBC SBC-381H Bedienungsanleitung

Mitel

Mitel 5602 Bedienungsanleitung

ASCOM

ASCOM d81 Messenger Montageanleitung

SpectraLink

SpectraLink 7522 Bedienungsanleitung

Avaya

Avaya L100 Series Anleitung zur Verwendung

ooma

ooma HD2 Handset Bedienungsanleitung

Yealink

Yealink IPW56 Bedienungsanleitung