V-tech Nighty Nite Nature Light Bedienungsanleitung
®
USER'S MANUAL
© VTECH
91-01491-005
Nighty Nite Nature Light
™
®
Smart Start
1
Dear Parent:
At VTECH®we know that a child has the ability to do great things. That’s
why all of our electronic learning products are uniquely designed to
develop a child’s mind and allow them to learn to the best of their ability.
Whether it’s introducing numbers and letters, identifying colors and
shapes, or stimulating senses with lights and music, all VTECH® infant
and toddler learning products encourage your child’s natural growth and
discovery skills. When it comes to providing electronic learning products
that enlighten, entertain and develop minds, at VTECH®we see the
potential in every child.
2
INTRODUCTION
Thank you for purchasing the VTech®Nighty Nite Nature Light™! We at
VTech®are committed to providing the best possible products to entertain
andeducateyourchild.Shouldyouhaveany questionsorconcerns,please
call our Consumer Services Department at 1-800-521-2010 in the U.S. or
1-800-267-7377 in Canada.
The VTech®Nighty Nite Nature Light™ is a soothing crib light that is
designedforbabies birth and up. The VTech®Nighty Nite Nature Light™
uses a combination of classical melodies, nature sound effects, and lights
to soothe baby off to dreamland. The VTech®Nighty Nite Nature Light™
features a built-in sound sensor. If the baby awakes and cries after the
product powers-down, the product will automatically re-activate, soothing
baby off to dreamland once again.
TIME
SELECTOR
SWITCH
MUSIC NOTE
BUTTON
LIGHT
BUTTON
VOLUME
DIAL
FOCUS
DIAL
LIGHT
PROJECTION
™
ON/OFF MODE
SELECTOR SWITCH
CRIB
ATTACHMENT
STRAPS
ROCKING MOON
AND BEAR SHOOTING STARS
SOUND SENSOR
3
INCLUDED IN THIS PACKAGE
- One VTech®Nighty Nite Nature Light™
- Two crib attachment straps
- One instruction manual
WARNING: All packing materials, such as tape, plastic sheets, wire ties
and tags are not part of this toy, and should be discarded for
your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
unit. Use a coin or screwdriver to loosen the
screw.
3. Install 4 new “C” size (UM-2/LR14) batteries
following the diagram inside the battery box.
(The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure the battery cover.
4
BATTERY NOTICE
• Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the unit
will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE: Iffor somereasontheprogram/activitystopsworking, pleasefollow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.
5
LIGHT BULB REPLACEMENT
1. Locate the light bulb cover at the bottom of
the unit.
2. MakesuretheunitisturnedOFF.Useacoin
or screwdriver to open the cover.
3. Gentlypullout the old light bulbandremove
the protection ring from the old light bulb.
4. Attachtheprotectionringtothenewlightbulb.
Placetheprotectionringaroundthenewlight
bulb and turn the ring until it is securely
fastened to the new light bulb. Carefully put
the new light bulb into the light bulb socket.
Pleaseusea4.8volt,0.3Alightbulb. Please
note the maximum power light bulb that can
be used is a 2.4 watt light bulb.
5. Replace the light bulb cover and secure the
screw using a coin or screwdriver.
VOL.
VOL.
6
CRIB ATTACHMENT
The crib attachment straps allow for easy and secure mounting of the
VTech®Nighty Nite Nature Light™ to a crib.
IMPORTANT NOTE:
To ensure your child’s safety, please follow the instructions below carefully
andmakesure the final assemblyis correct.Attach onlyto cribs with sturdy
rails and spindles. Do not attach to playpens with mesh walls.
1. Place the unit in the crib bringing both straps
overthetoprail.Slipthetopofthestrapunder
the slot on the back of the unit and secure.
Repeat this procedure for the second strap.
You can adjust the hanging height by
choosing the appropriate hole on the top of
each strap.
2. Pull slightly on the unit to make sure both
strapshavebeensecurelyfastened. Theunit
should be snugged against the crib rail.
Please check the unit frequently to ensure it
is still secure.
NOTE: For an additional use, the unit can be removed from the crib and
placed on a dresser.
TO BEGIN PLAY
1. SlidetheTIMESELECTORSWITCH( ) to
the desired time setting.
7
2. Slide the ON/OFF MODE SELECTOR
SWITCH to the MELODY MODE ( ),
NATURE SOUND EFFECT MODE ( ), or
MELODY + NATURE SOUND EFFECT
MODE ( ) to turn the unit on.
3. Turn the VOLUME DIAL ( ) to the desired
volume.
4. Pressthe LIGHT BUTTON ( )to chooseamongthe4 lightpatterns.
a. Projectionlightandtwinklingstarlights( )
.
Note: Theprojectionlight and twinkling star
lightswillautomaticallyturnonwhentheunit
is turned on.
b. Twinkling star lights ( ).
8
c. Background light and twinkling star
lights ( ).
d. Turn off the lights ( ).
Note: TheFOCUS DIAL canbeusedtoadjusttheprojectionlight.Simplyslide
the dial to the desired focus while the projection light is on.
5. Press the MUSIC NOTE BUTTON ( )
located on the front of the unit to re-activate the
selected mode.
NIGHT LIGHT FEATURE
1. While the ON/OFF MODE SELECTOR
SWITCH is on the OFF position, press the
LIGHT BUTTON ( ) to the desired light
setting. The lights will light up according to
the time selected.
9
ACTIVITIES
A. Melody Mode
1. Slide the ON/OFF MODE SELECTOR
SWITCH to the MELODY MODE ( ).
The unit will greet the baby with “It’s lullaby
time”. 10 classical melodies will play
randomly according to the selected time.
2. The top projection light will light up and the
twinkling star lights will flash. The light
pattern can be adjusted by pressing the
LIGHT BUTTON ( ).
3. Press the MUSIC NOTE BUTTON ( ) to
re-activate the mode. “It’s lullaby time” and
randomclassicalmelodieswillbegintoplay.The
lights will light up according to the chosen light
pattern.
B. Nature Sound Effect Mode
1. Slide the ON/OFF MODE SELECTOR
SWITCH to the NATURE SOUND EFFECT
MODE ( ). This mode will play 5 soothing
nature sound effects (wind, wave, rain, bird,
cricket). Each sound effect will play for
approximately one minute and continue on to
the next sound effect. These sound effects will
play according to the selected time.
“It’s lullaby
time”+
“It’s lullaby
time”+
Inhaltsverzeichnis
Andere V-tech Schnuller/Beißring Handbücher
Beliebte Schnuller/Beißring Handbücher anderer Marken
Philips AVENT
Philips AVENT Avent SCF894/01 Bedienungsanleitung
nip
nip Cherry Bedienungsanleitung
Fisher-Price
Fisher-Price 71249 Bedienungsanleitung
Philips AVENT
Philips AVENT Avent SCF890/01 Bedienungsanleitung
nip
nip first moments My Butterfly Bedienungsanleitung
Philips
Philips SCF190/01 Bedienungsanleitung
Fisher-Price
Fisher-Price Sparkling Symphony Mobile Bedienungsanleitung
Philips AVENT
Philips AVENT Avent SCF892/01 Bedienungsanleitung
NUK
NUK 518 Bedienungsanleitung
Summer
Summer SLUMBER BUDDIES Bedienungsanleitung
Philips AVENT
Philips AVENT AVENT SCF128/01 Bedienungsanleitung
Philips
Philips SCF192/04 Bedienungsanleitung