V-tech CS6409 Bedienungsanleitung

User’s manual

Accessory handset for

use with VTech models

CS6419/CS6428/CS6429

www.vtechphones.com

Model: CS6409 BC

Congratulations

on purchasing your new VTech product. Before using this

telephone, please read Important safety instructions

on pages 8 of this manual.

This manual has instructions on how to set up and register your

new handset. For complete instructions on using the handset, see

the user’s manual that came with your telephone base.

If you cannot ﬁnd your user’s manual, you can view or download it at

www.vtechphones.com. In Canada, go to www.vtechcanada.com.

3-month warranty!

Visit www.vtechphones.com.

Registration

warranty support.

Product news

Learn about the latest VTech products.

Telephones identified with this logo have reduced noise

and interference when used with most T-coil equipped

hearing aids and cochlear implants. The TIA-1083 Compliant

Logo is a trademark of the Telecommunications Industry

Association. Used under license.

Compatible with

Hearing Aid T-Coil

TIA-1083

Table of contents

Getting started............................................................................1

Parts checklist ............................................................................. 1

Battery installation ....................................................................... 2

Battery charging .......................................................................... 3

Add and register a handset ........................................................ 4

Replace a handset....................................................................... 5

Handset layout ............................................................................ 6

Appendix .....................................................................................8

Important safety instructions........................................................ 8

Operating range......................................................................... 12

Maintenance.............................................................................. 12

The RBRC®seal........................................................................ 13

FCC, ACTA and IC regulations ................................................. 14

California Energy Commission battery charging

testing instructions................................................................. 17

For C-UL compliance only......................................................... 18

Limited warranty ........................................................................ 21

Technical speciﬁcations............................................................. 24

Parts checklist

Your telephone package contains the following items. Save your

sales receipt and original packaging in case it is necessary to ship

your telephone for warranty service.

Handset

User’s manual

Getting started

Charger and charger adapter

BatteryBattery compartment

cover

To purchase a replacement battery or power adapter, visit our

website at www.vtechphones.com or call 1 (800) 595-9511. In

Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

Getting started

Battery installation

Install the battery as shown below.

Plug the battery connector securely into the socket inside the

handset battery compartment.

Place the battery with the label THIS SIDE UP facing up and the

wires inside the battery compartment.

Align the cover flat against the battery compartment, then slide it

towards the center of the handset until it clicks into place.

Charge the handset by placing it in the telephone base or

charger. The CHARGE light is on when the handset is charging.

CHARGE light

remains on when

charging.

3 4

If the handset will not be used for a long time, disconnect

and remove the battery to prevent possible leakage.

To purchase a replacement battery, visit our website at

www.vtechphones.com or call 1 (800) 595-9511. In Canada,

go to www.vtechcanada.com or dial 1 (800) 267-7377.

•

Battery charging

Once you have installed the battery, the screen indicates the

battery status (see the table below).

For best performance, keep the handset in the telephone base

or charger when not in use.

The battery is fully charged after 10 hours of continuous

charging.

If you place the handset in the telephone base or the charger

without plugging in the battery, the screen displays NO BATTERY.

•

Getting started

Battery indicators Battery status Action

The screen is blank,

or shows

PLACE IN CHARGER

and flashes.

Battery has no

charge or very

little charge. The

handset cannot

be used.

Charge without

interruption (at least

30 minutes).

The screen shows

LOW BATTERY and

flashes.

Battery has

enough charge to

be used for a

short time.

Charge without

interruption (at least

30 minutes).

The screen shows

HANDSET X.Battery is charged. To keep the battery

charged, place it in the

telephone base or charger

when not in use.

When the battery is fully charged, you can expect the following

performance:

Operation Operating time

While in handset use (talking*) Up to seven hours

While in speakerphone mode (talking*) Up to four hours

While not in use (standby**) Up to five days

*Operating times vary depending on your actual use and the age of the battery.

**Handset is not charging or in use.

SET DATE

--/--/--

After you install your telephone or power returns

following a power outage, the handset will

prompt you to set the date and time. To skip

setting the date and time, press OFF/CANCEL.

Add and register a handset

Each new handset (CS6409) must be registered with the

telephone base before use. When first purchased, each

expansion handset shows 1.PRESS FIND HS ON BASE 4 SEC

and 2.THEN PRESS # ON HANDSET alternately. You may need

to charge the handset before registering it to the telephone base.

For more details on battery charging, see the table on page 3.

To register a handset:

Place the unregistered handset in the telephone base or

charger. If 1.PRESS FIND HS ON BASE 4 SEC and

2.THEN PRESS # ON HANDSET do not appear alternately

on the handset screen after a few seconds, remove the

handset and place it in the telephone base or charger again.

On the telephone base, press and hold

/FIND HANDSET for about four seconds

until the red IN USE light on the telephone base

turns on.

On the handset, press #(pound key) and the

handset shows REGISTERING.....

PLEASE WAIT. The handset shows HANDSET REGISTERED

and you hear a beep when the registration process completes.

It takes about 60 seconds to complete.

When the registration process is complete, the newly registered

handset is assigned the next available handset registration

number. For instance, if you already have HANDSET 1, the next

registered handset will be HANDSET 2.

Getting started

If the registration fails, the handset shows REGISTRATION

FAILED, then the handset shows 1.PRESS FIND HS ON BASE

4 SEC and 2.THEN PRESS # ON HANDSET alternately. To

reset the handset, remove the handset from the telephone

base and place it back in. Try the registration process again.

You cannot register a handset if any other system handset

is in use.

To reset the telephone, unplug the power and the battery for

a few seconds then plug them back in.

Only one handset can register to the telephone base at a time.

•

Replace a handset

If you want to replace a handset or reassign the designated

handset number of a registered handset, you must deregister all

the handsets and then individually register each handset.

To make deregistration easier, read all of the instructions below

before you begin.

To deregister all handsets:

Press and hold /FIND HANDSET on the telephone base for

about 10 seconds until the IN USE light on the telephone base

turns on and starts to flash.

Press and release /FIND HANDSET again. You must press

/FIND HANDSET while the IN USE light is still flashing. The

IN USE light flashes for approximately five seconds. If the light

stops flashing, start again at Step 1.

The deregistration process takes about 10 seconds to

complete. All handsets show 1.PRESS FIND HS ON BASE 4

SEC and 2.THEN PRESS # ON HANDSET alternately when

the deregistration process completes.

If deregistration fails, you may need to reset the telephone and

try again.

To reset:

Pick up the registered handset and then press /FLASH.

Press OFF/CANCEL and place the handset back in the

telephone base.

-OR-

Unplug the power from the telephone base, then plug it back in.

•

You cannot deregister handsets if any other system handset is

in use.

You cannot deregister handsets if any other system handset is

in use.

Getting started

/VOLUME

Press to enter the directory when the

telephone is not in use.

Press to scroll up while in a menu, or in

the directory, call log or redial list.

During a call, press to increase the

listening volume.

During message playback, press to increase

the listening volume (for handsets registered to

CS6428 and CS6429 base only).

When entering numbers or names in the

directory, press to move the cursor to the right.

Handset layout

Getting started

(speakerphone)

Press to make or

answer a call.

During a call, press

to switch between the

speakerphone and

the handset.

CHARGE light

On when the handset is charging in the

telephone base or charger.

MUTE/DELETE

While on a call, press to mute the microphone.

While using the dialing keys, press to delete

digits or characters.

While the handset is ringing, press to silence

the ringer temporarily.

When reviewing the redial list, directory or call

log, press to delete the displayed entry.

/FLASH

Press to make or answer a call.

During a call, press to answer an incoming call

when you receive a call waiting alert.

While reviewing a call log entry, press repeatedly

to add or remove 1 in front of the call log entry

before dialing or saving it to the directory.

TONE

Press to switch to tone dialing temporarily when

using the pulse service.

Handset layout

Getting started

MENU/SELECT

Press to show the menu.

While in a menu, press to select an item, or

save an entry or setting.

OFF/CANCEL

During a call, press to hang up.

While the handset is ringing, press to silence

the ringer temporarily.

While the telephone is not in use, press and hold

to erase the missed call indicator.

While in a menu, press to exit to the previous

menu, or press and hold to exit to idle mode.

#( pound key)

Press repeatedly to show other dialing options

when reviewing a call log entry.

INT (intercom)

Press to start an intercom conversation or transfer a call.

REDIAL/PAUSE

Press to review the redial list.

While dialing or entering numbers into the directory,

press and hold to insert a dialing pause.

CID /VOLUME

Press to review the call log when the telephone

is not in use.

Press to scroll down while in a menu, or in the

directory, call log or redial list.

During a call, press to decrease the listening

volume.

During message playback, press to decrease

the listening volume (for handsets registered to

CS6428 and CS6429 base only).

When entering numbers or names in the

directory, press to move the cursor to the left.

Dialing keys

Press to enter numbers or characters.

Andere Handbücher für CS6409

Inhaltsverzeichnis

Andere V-tech Telefonzubehör Handbücher

V-tech

V-tech LS6001 Bedienungsanleitung

V-tech

V-tech VT9042 Bedienungsanleitung

V-tech

V-tech LS6005 Bedienungsanleitung

V-tech

V-tech gz5838 Bedienungsanleitung

V-tech

V-tech LS6105 Bedienungsanleitung

V-tech

V-tech SN6307 Bedienungsanleitung

V-tech

V-tech LS6105 Bedienungsanleitung

V-tech

V-tech ES1510A Bedienungsanleitung

V-tech

V-tech VH621 Bedienungsanleitung

V-tech

V-tech LS916 Bedienungsanleitung

V-tech

V-tech CM18045 Bedienungsanleitung

V-tech

V-tech ET6 Bedienungsanleitung

V-tech

V-tech TR02-2013 Bedienungsanleitung

V-tech

V-tech ErisTerminal VSP601A Bedienungsanleitung

V-tech

V-tech gz5838 Bedienungsanleitung

V-tech

V-tech DS6421-2 Bedienungsanleitung

V-tech

V-tech DS6151 - 6.0 Expandable Cordless Phone Bedienungsanleitung

V-tech

V-tech SN6167 Bedienungsanleitung

V-tech

V-tech VSMART VS014 Bedienungsanleitung

Beliebte Telefonzubehör Handbücher anderer Marken

IAI

IAI CON-T Bedienungsanleitung

BT DIVERSE 5400 Bedienungsanleitung

Tadiran Telecom

Tadiran Telecom EMERALD ICE Bedienungsanleitung

Musicam

Musicam FieldFone II Bedienungsanleitung

Polycom

Polycom KIRK KIRK 4040 Technisches Datenblatt

TIPTEL

TIPTEL DECT Set 50 Bedienungsanleitung

Panasonic

Panasonic KX-UDS124 Bedienungsanleitung

BT BT7600 Technisches Datenblatt

Panasonic

Panasonic KX-TVP100E Bedienungsanleitung

View

View VP-PC Bedienungsanleitung

Baldwin Boxall

Baldwin Boxall BT8 Bedienungsanleitung

SMC Networks

SMC Networks SMCDPCR-AP Bedienungsanleitung

SkyLink

SkyLink SD-001 Bedienungsanleitung

Nera

Nera ISDN Bedienungsanleitung

MCheeta

MCheeta CT-CID803 Plus Bedienungsanleitung

YASKAWA

YASKAWA YRC1000 Bedienungsanleitung

Intellitouch

Intellitouch MOH-500E Bedienungsanleitung

Viking

Viking SQRG-12 Gebrauchsanweisung