VADDIO AV BRIDGE MATRIX PRO Bedienungsanleitung

Installation Guide for the

AV Bridge MATRIX PRO

Multimedia Room Solution

Document 411-0020-31 Rev A

March 2018

Contents

Overview 1

About this Guide 1

Features 1

Product Compatibility 2

Vaddio Cameras 2

Non-Vaddio Cameras 2

Control Devices 2

Audio 2

Trigger Devices 2

Unpacking the Room Solution 3

A Quick Look at the Multimedia Room Solution 4

Connector Panel 5

Installation 6

Don’t Void Your Warranty! 6

Cabling Notes 6

Basic Connections 7

RS-232 Serial Communication Settings and Port Pin-outs 8

Ensuring Compatibility 9

Powering Up 9

Next Steps 9

Troubleshooting and Care 10

Operation, Storage, and Care 11

Compliance Statements and Declarations of Conformity 12

FCC Part 15 Compliance 12

ICES-003 Compliance 12

European Compliance 13

Warranty Information 14

Photo Credits 15

Index 16

Installation Guide for the AV Bridge MATRIX PRO Multimedia Room Solution

Overview

This guide provides information about the AV Bridge MATRIX PRO multimedia room solution:

n999-8230-000 – North America

n999-8230-001 – Europe and UK

n999-8230-009 – Australia and New Zealand

About this Guide

This guide covers:

nUnpacking the multimedia room solution

nTips for a successful installation

nInformation on connecting the multimedia room solution

nEquipment power-on

Complete product information is available in the Integrator's Complete Guide to the AV Bridge

MATRIX PROMultimedia Room Solution.

Features

Inputs and Outputs:

nQuick-Connect inputs for three Vaddio cameras

nVideo input for computer or other video source

nHDMI and proprietary Quick-Connect video outputs

nFour EasyMic microphone inputs

nFour additional balanced mic/line inputs with 48 V phantom power

nFour balanced audio outputs

nSimultaneous USB and IP streaming

nExternal RS-232 control input

Cameras and Video:

nAutomatically identifies and configures for Vaddio cameras

nAccess to settings stored on each connected camera

nIndependently configurable output resolutions

nConfigurable picture-in-picture (PIP) for conferencing

nSplit screen – top/bottom or quad split showing all four video inputs simultaneously

nSeamless video transitions with software adjustable transition time - cross-fades and straight cuts

Audio:

nAutomatic audio mixing with controls to to manage audio levels manually if desired

nAcoustic echo cancellation with selectable AEC reference

nAssignable chairman priority gives one microphone a 3dB boost over the others

nCrosspoint gain configurable separately for each point in the audio matrix

Control

nBrowser-based web interface for operation, configuration and system administration

nTriggers for programmed actions such as changing the video source, moving a camera to one of its

presets, and most other operations:

oUp to 10 external hardware trigger inputs

oUp to 50 software triggers

oUp to four EasyMIC MicPOD One Touch triggers

Installation Guide for the AV Bridge MATRIX PRO Multimedia Room Solution

Product Compatibility

The AV Bridge MATRIX PRO is compatible with the following products.

Vaddio Cameras

May require an update to the camera's firmware.

Product RS-232 IP

RoboSHOT Series

(may use Quick-Connect or OneLINK

device)

Yes Yes*

ConferenceSHOT Series** Yes Yes

ClearVIEW HD 20SE Yes No

PowerVIEW HD 22/30 Yes No

ZoomSHOT 20 Yes No

WideSHOT Yes No

DocCAM 20 HDBT with OneLINK

device

Yes Yes

* IP control always uses the camera's IP address, not the address of its extension device (if one is used).

** Includes cameras marked ClearSHOT 10 USB.

Non-Vaddio Cameras

Product RS-232 IP

Sony BRC Z330, Z700, H700, H900 Yes No

Sony EVI-H100S Yes No

Sony SRG 120, SRG 300 Yes No

Panasonic AW-HE 40, AW-HE 130 Yes No

Control Devices

USB joysticks

Audio

nEasyMIC series tabletop and ceiling microphones

nEasyUSB mixers and I/O devices

nAudio-Technica AT U891R boundary microphone

Trigger Devices

nPresenterPOD devices

nStepVIEW mats

Installation Guide for the AV Bridge MATRIX PRO Multimedia Room Solution

Unpacking the Room Solution

Make sure you received all the items you expected. Here are the packing lists for the AV Bridge MATRIX

PRO multimedia room solution.

North America:AV Bridge MATRIX PRO, part number 999-8230-000

Europe/UK: AV Bridge MATRIX PRO, part number 999-8230-001

Australia: AV Bridge MATRIX PRO, part number 999-8230-009

nAV Bridge MATRIX PRO

n24V, 3.75A power supply with AC cord set(s)

n3-position phoenix-style connectors, qty 8

n12-position phoenix-style connector

n6 ft (1.83 m) USB 2.0 cable, type A to B

nRack mounting ears, qty. 2

nQuick-Start Guide

Installation Guide for the AV Bridge MATRIX PRO Multimedia Room Solution

A Quick Look at the Multimedia Room Solution

n8-line illuminated display – View basic operation and configuration menu and system information

nMenu knob – Navigate the operation/configuration menu

nSelect and Cancel buttons – Work with the operation/configuration menu

nVideo Mute button – Stop sending video. Press the button again to resume sending video from the

selected source. When video is muted, the AV Bridge MATRIX PRO sends a black screen or color bar

pattern instead.

nAudio Mute button – Stop sending audio. Press the button again to resume sending audio.

nDimensionally enhanced puffy badge – We have spared no expense to provide a lovely, dimensionally

enhanced, puffy badge to enhance your visual experience. It's quite shiny. We hope you'll enjoy it.

Installation Guide for the AV Bridge MATRIX PRO Multimedia Room Solution

Connector Panel

nExternal control: RS-232 port for external control device; trigger inputs for up to 10 presenter-controlled

devices

nEasyMic Ports: Connections for 4 Vaddio EasyMic tabletop or ceiling microphones

nMic/Line Inputs: Connections for 4 additional microphones or other balanced audio sources

nLine Outputs: Connections for 4 balanced audio outputs

n24 VDC 3.75A: Power connection

nNetwork: Control, IP streaming, graphics

nUSB 2.0 port: Uncompressed audio and video stream

nRS-232 ports (Camera 1 – Camera 3): Camera control connections

nEZPower Video ports (Camera 1 – Camera 3): Power to and video from Vaddio cameras that are

compatible with Vaddio Quick-Connect devices

nHDMI inputs (Camera 1 – Camera 3): Video from connected cameras that are not compatible with

Vaddio Quick-Connect devices

nPC Input (RGBHV In and HDMI In):Video inputs for a computer or other video source

nHSDS Out to QC: Vaddio proprietary-format video output; connect to a Vaddio Quick-Connect device

feeding a display or projector

nHDMI Out: HDMI video and audio output

Installation Guide for the AV Bridge MATRIX PRO Multimedia Room Solution

Installation

This section covers how to install and connect the product. It also provides safety information and other

guidance related to installing the product.

Note

This product is intended for installation and use only in environments where all RS-232 and PoE+

connections originate within the building.

Don’t Void Your Warranty!

Caution

This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate

protective enclosure. Do not allow it to come into contact with any liquid.

Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these

things happen, return it to Vaddio for safety and functional testing.

Cabling Notes

Use Cat-5e or better cable and standard RJ-45 connectors (568B termination). We recommend using high-

quality connectors and a high-quality crimping tool.

Note

Use standard RJ-45 connectors and a good crimping tool. Do not use pass-through RJ-45 connectors.

Poorly terminated cables can damage the connectors on the product, cause intermittent connections, and

degrade signal quality. Test cable pin-outs and continuity before connecting them.

Intact – will make reliable contact

with cable connector

Damaged – Bent contact fingers

will NOT make reliable contact

with cable connector

Caution

Check Cat-5 cables for continuity before using them. Using the wrong pin-out may damage the camera

system and void the warranty.

Pro Tip

To prevent tragic mishaps, label both ends of every cable.

Installation Guide for the AV Bridge MATRIX PRO Multimedia Room Solution

Basic Connections

This diagram illustrates some of the possibilities of the AV Bridge MATRIX PRO – multiple camera and

microphone inputs, multiple display and audio outputs.

In place of at least one of the EasyMic microphones, you can connect an EasyUSB Pro Mic I/O with up to

four PZM microphones connected to it.

Note

Because the AV Bridge MATRIX PRO provides camera extension functionality, cable distance for

cameras 1 through 3 is up to 100 ft. (30 m) for PTZ cameras, or 150 ft. (45 m) for fixed cameras.

Installation Guide for the AV Bridge MATRIX PRO Multimedia Room Solution

RS-232 Serial Communication Settings and Port Pin-outs

The RS-232 serial ports (color-coded blue) on the back panel provide camera control for video inputs 1

through 3.

Camera communication parameters are as follows:

Parameter Value

Communication Speed 9600 bps (default)

Start bits 1

Stop bits 1

Data bits 8

Parity None

Flow control None

Camera RS-232 connector pin-out:

nPin 1: Not used

nPin 2: Not used

nPin 3: Not used

nPin 4: Not used

nPin 5: Not used

nPin 6: GND

nPin 7: TXD (to RXD of camera)

nPin 8: RXD (from TXD of camera)

Caution

Check Cat-5 cables for continuity before using them. Using the wrong pin-out may damage the camera

system and void the warranty.

External Control connector pin-out:

nPin 1: Not used

nPin 2: TXD (to RXD of connected device)

nPin 3: RXD (to TXD of connected device)

nPin 4: Not used

nPin 5: GND

nPins 6 – 9: Not used

External control communication parameters are as follows:

Parameter Value

Communication Speed 38400 bps (default)

Start bits 1

Stop bits 1

Data bits 8

Parity None

Flow control None

Depending on the equipment connected to the RS-232 port, you may need a null-modem (crossover) cable.

Installation Guide for the AV Bridge MATRIX PRO Multimedia Room Solution

Andere Handbücher für AV BRIDGE MATRIX PRO

Inhaltsverzeichnis

Andere VADDIO Konferenzsystem Handbücher

VADDIO

VADDIO EasyIP Systems Bedienungsanleitung

VADDIO

VADDIO WideSHOT 999-6911-000 Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT AV Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT AV Bedienungsanleitung

VADDIO

VADDIO EasyTalk Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT AV Bedienungsanleitung

VADDIO

VADDIO Quick-Connect CCU H900 Bedienungsanleitung

VADDIO

VADDIO PowerVIEW HD-30 Bedienungsanleitung

VADDIO

VADDIO EasyMic MicPOD Bedienungsanleitung

VADDIO

VADDIO HUDDLESTATION Betriebsanleitung

VADDIO

VADDIO ConferenceSHOT AV Bedienungsanleitung

VADDIO

VADDIO EasyIP Systems Bedienungsanleitung

VADDIO

VADDIO BaseStation 999-8920-000 Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT AV Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT AV Bedienungsanleitung

VADDIO

VADDIO WallVIEW HD-USB PRO System Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT AV Bedienungsanleitung

VADDIO

VADDIO GroupSTATION Bedienungsanleitung

VADDIO

VADDIO GroupSTATION 999-8900-000 Bedienungsanleitung

VADDIO

VADDIO HUDDLESTATION Bedienungsanleitung

VADDIO

VADDIO BaseSTATION Bedienungsanleitung

VADDIO

VADDIO OneLINK Bridge Bedienungsanleitung

VADDIO

VADDIO ConferenceSHOT AV Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung