VADDIO RoboTRAK Bedienungsanleitung

Integrator's Complete Guide to the

RoboTRAK Presenter Tracking System

Document 342-1229 Rev. E

November 2016

Contents

What's in this Guide 1

Overview 1

Features 1

IR Camera 1

IRSource Lanyard 1

Unpacking the System 2

North America 3

Europe and UK 3

Australia and New Zealand 4

A Quick Look at the RoboTRAK System 5

Front of the IR Camera 5

Status Indications 5

Connectors 6

Lanyard 6

Before You Start 7

Network Requirements 7

Additional Equipment 7

Lighting and IR 7

Camera Location 9

Camera Placement – Small Room 9

Camera Placement – Medium Room 10

Camera Placement – Large Room 11

Installation 12

Don’t Void Your Warranty! 12

Cabling Notes 12

The IR Camera's Default Hostname 13

Before You Install the Camera 13

Placing the PoE Splitter 14

Installing the Camera Mount 15

Wall Installation 15

Ceiling Installation 15

Basic Connection Diagram 16

Connections for Configuring the System 16

Installing the Cameras 17

Preparing the Tracking Lanyard for Use 17

Powering Up the Cameras 17

Configuring the Tracking System 18

Establishing Communication Between the Cameras 18

Accessing the IR Camera's Web Interface 18

Loading the Room Configuration File 20

Accessing the Video Camera's Web Interface 21

Assigning Hostnames or IP Addresses to the Cameras 22

Configuring the Video Camera 23

Pairing the Cameras 24

Setting the Video Camera's Standby Behavior 24

Setting up the IR and Video Camera Lanyard Shots 25

Viewing the Stream from the IR Camera 25

Storing the IR Camera's Lanyard Shot 26

Storing the Video Camera's Lanyard Shot 28

Testing and Fine-Tuning 30

Tuning Cheat Sheet 31

Setting the IR Camera's Home Position 32

Setting the Lanyard Searching Behaviors 33

Setting the Presenter Area and Search Area 34

Adjusting AGC Gain 36

Setting the Tracking Speed: Speed Scaler 37

Setting IRCamera Responsiveness: Tracking Sensitivity 38

Adjusting the Video Camera Window Width 39

Dealing with Stray IR 40

Configuring the Video Camera 42

Exporting the Configuration 43

Web Interface Cheat Sheet 44

System Administration 45

Security Settings 45

Setting the Room Label Information 46

Specifying Time Zone and NTP Server 46

Pan-Tilt Reset, Reboot, and Factory Reset 47

Reset the Pan and Tilt Motors 47

Reboot the Camera 47

Restore Factory Settings 47

Downloading and Installing Firmware Updates 48

Getting Help 49

Presenting with the RoboTRAK System 49

How It Works 50

Tips for Great Presentations 50

Starting Your Presentation 50

Switching Between Tracking and Camera Presets 50

How the Cameras Behave 51

Tips for Handling and Storing the Lanyard 51

Telnet Serial Command API 52

About Controlling the Video Camera via Telnet 52

iii

Integrator's Complete Guide to the RoboTRAK Presenter Tracking System

Commands to Avoid 52

camera master tracking 53

camera master recalibrate 53

camera master standby 53

camera master standby config peripheral 54

camera master ccu 54

camera slave1 preset recall 55

network ping 55

network settings get 55

streaming settings 56

system reboot 56

system factory-reset 57

sleep 57

help 58

history 58

version 59

exit 59

Troubleshooting and Care 60

Status Indications 60

Fault Isolation 60

Operation, Storage, and Care 61

Specifications 62

Compliance Statements and Declarations of Conformity 63

FCC Part 15 Compliance 63

ICES-003 Compliance 63

European Compliance 64

Warranty Information 65

Index 66

Integrator's Complete Guide to the RoboTRAK Presenter Tracking System

What's in this Guide

This guide provides information on the following topics:

nUnpacking and installing RoboTRAK cameras

nThe camera's physical features and switch settings

nControlling the camera using the IR remote or web interface

nControlling the camera using Telnet or RS-232 commands

nSpecifications

nTroubleshooting and maintenance

nWarranty and compliance/conformity information

For your convenience, this information is also available in smaller, limited-purpose manuals:

nInstallation Guide for the RoboTRAK Presenter Tracking System (unpacking, physical features,

switch settings, installation, initial power-up)

nConfiguration and Administration Guide for the RoboTRAK Presenter Tracking System

(physical features, controlling the camera, troubleshooting, and specifications)

Download manuals, dimensional drawings, and other information from www.vaddio.com/support.

Overview

This guide covers the RoboTRAK presenter tracking system with IR

camera:

nRoboTRAK, North America – 999-7270-000

nRoboTRAK, Europe and UK – 999-7270-001

nRoboTRAK, Australia and New Zealand – 999-7270-009

This system requires a video camera, which is sold and documented

separately. The RoboTRAK system works with RoboSHOT™ series

cameras. Refer to the video camera's documentation for information on how

to connect and configure it.

Features

nIR-based presenter tracking for medium to large rooms

nDesigned for educators, in consultation with educators, using Vaddio's proven, industry-leading

technology

nReliable tracking: Move around, turn your head, invite others to the front of the room... the camera stays

on you

nSwitch between tracking and preset positions

nCamera sold separately – use with the RoboSHOT™ camera of your choice

IR Camera

nSimple configuration and administration using the Vaddio web interface

nAdjust the system's tracking behavior to match the presenter's style

nOperational range of 12 to 50 ft (3.7 to 15.2 m), any height from 6 to 15 ft. (1.8 to 4.6 m)

IRSource Lanyard

nNo belt pack – comfortable, highly wearable design that does not interfere with clothing

nUp to 40 hours of battery power; 25 hours typical

nRecessed switch for full power-down – Conserve battery life during storage; no risk of accidental

actuation

Unpacking the System

Make sure you received all the items you expected.

Vaddio recommends purchasing a second lanyard as a spare or for smooth transitions between multiple

presenters.

Note

In addition to the items listed here, you will need a video camera. Any RoboSHOT series camera can be

used.

If remote viewing is desired, you must use a video camera that is capable of streaming. These include

RoboSHOT 10 USB, RoboSHOT HD-SDI, and RoboSHOT 20 UHD cameras.

Caution

Always support the camera's base when picking it up. Lifting the camera by its head or mounting

arm will damage it.

Note

Copy the default hostname from the label on the bottom of the camera, and keep this information in a place

where it will be available to anyone who needs to work with the camera's web interface. This information is

required to access the camera for initial configuration, or after a factory reset.

Integrator's Complete Guide to the RoboTRAK Presenter Tracking System

North America

Part number 999-7270-000, RoboTRAK

nVaddio RoboTRAK IR camera

nPoE+ power injector

nAC cord set for North America

nPoE splitter

nPower cable, 1 ft (30 cm)

nCat-5e cable, 1 ft (30 cm)

nCat-5e cable, 10 ft (3 m)

nWall mount with mounting hardware

nIR lanyard

nUSB charger

nUSB charger cable

nFerrite bead

nQuick Start Guide

Part number 999-7271-000, additional lanyard kit (optional, purchased separately):

nLanyard

nUSB charger

nUSB charger cable

nFerrite bead

Europe and UK

Part number 999-7270-001, RoboTRAK

nVaddio RoboTRAK IR camera

nPoE+ power injector

nAC cord sets for Europe and UK

nPoE splitter

nPower cable, 1 ft (30 cm)

nCat-5e cable, 1 ft (30 cm)

nCat-5e cable, 10 ft (3 m)

nWall mount with mounting hardware

nIR lanyard

nUSB charger

nUSB charger cable

nFerrite bead

nQuick Start Guide

Part number 999-7271-001, additional lanyard kit (optional, purchased separately):

nLanyard

nUSB charger

nUSB charger cable

nFerrite bead

Integrator's Complete Guide to the RoboTRAK Presenter Tracking System

Australia and New Zealand

Part number 999-7270-009, RoboTRAK in silver and black

nVaddioRoboTRAK IR camera

nPoE+ power injector

nAC cord set for Australia and New Zealand

nPoE splitter

nPower cable, 1 ft (30 cm)

nCat-5e cable, 1 ft (30 cm)

nCat-5e cable, 10 ft (3 m)

nWall mount with mounting hardware

nIR lanyard

nUSB charger

nUSB charger cable

nFerrite bead

nQuick Start Guide

Part number 999-7271-009, additional lanyard kit (optional, purchased separately):

nLanyard

nUSB charger

nUSB charger cable

nFerrite bead

Integrator's Complete Guide to the RoboTRAK Presenter Tracking System

A Quick Look at the RoboTRAK System

This section covers the physical features of the RoboTRAK system:

nIR camera

nTracking Lanyard

The RoboTRAK system requires a video camera as well. You can use any Vaddio RoboSHOT camera as

the video component of the system.

Note

If remote viewing is desired, you must use a video camera that is capable of streaming. These include

RoboSHOT 10 USB, RoboSHOT HD-SDI, and RoboSHOT 20 UHD cameras.

Refer to the documentation for your RoboSHOT camera for detailed information on connections and

camera control.

Front of the IR Camera

nCamera assembly – based on the same reliable hardware as our latest generation of video cameras.

nReflective lens – reduces interference from spurious IR sources. The reflective lens also provides a

simple visual cue that it's not a standard video camera.

nIndicator light – shows the IRcamera's current status.

Status Indications

In normal use, the RoboTRAK IR camera's status light will provide more useful information than the video

camera's indicator light.

nGreen – Tracking or waiting at the home position

nBlue – Not in tracking mode (may be at a video camera preset position)

nBlinking green – Searching for the lanyard

nBlinking blue – Not paired or not in contact with the video camera

nPurple – In standby mode or booting

nBlinking yellow – Executing a pan-tilt reset

nYellow – Updating firmware

Integrator's Complete Guide to the RoboTRAK Presenter Tracking System

Connectors

n12 VDC, 3.0 Amp power connector – Connect only the PoE splitter shipped with the camera.

nNetwork/PoE+ – 10/100 Ethernet/PoE+ port allows the RoboTRAK™ IR camera to control the video

camera, and provides access to the web interface.

nDIP switches – Factory use only.

Lanyard

Vaddio recommends purchasing a second lanyard as a spare or for smooth transitions between multiple

presenters.

Medallion – Houses charging and control circuitry, switches to standby (low-power)mode when the IR

camera switches to standby.

nButton – On/off switch for IR sources

nIlluminated ring – Visual status indicator directs light toward the wearer,

not the audience

nBattery – Rechargeable Li-ion battery; up to 25 hour battery life, roughly 4

hour charging time

nUSB micro-B charging port – Connect the supplied battery charger

nRecessed power switch – Allows you to turn off the lanyard completely to

extend battery life

Ribbon – Holds the medallion and contains the IRsources.

nStrand of IR LEDs – Provide a characteristic image pattern that the

camera identifies and tracks

nSafety clasp – Automatically releases under tension

Caution

Do not pinch, crease, or stretch the lanyard ribbon. Do not pull the lanyard ribbon to release the clasp. Any

of these will damage the circuitry in the ribbon.

Integrator's Complete Guide to the RoboTRAK Presenter Tracking System

Andere Handbücher für RoboTRAK

Inhaltsverzeichnis

Andere VADDIO Digitaler Präsentator Handbücher

VADDIO

VADDIO RoboTRAK Bedienungsanleitung

Beliebte Digitaler Präsentator Handbücher anderer Marken

Edirol

Edirol RG-100 Bedienungsanleitung

Hama

Hama Como Bedienungsanleitung

Dukane

Dukane AV-P1000 Bedienungsanleitung

Canon

Canon PR3 Bedienungsanleitung

VSON

VSON N81 Bedienungsanleitung

Samsung

Samsung UF-130DX Bedienungsanleitung

Targus

Targus Multimedia Bedienungsanleitung

Edirol

Edirol PR-50 Betriebsanleitung

x-pointer

x-pointer IMAGE POINTER XPM170Y Bedienungsanleitung

Acrobak

Acrobak BLP-305 Bedienungsanleitung

Targus

Targus Mac AMP11 Bedienungsanleitung

Edirol

Edirol PR-50 Bedienungsanleitung

Samsung

Samsung SDP-850 Bedienungsanleitung

Dukane

Dukane DV-P303A Bedienungsanleitung

RemotePoint

RemotePoint Presenter Global Bedienungsanleitung

Kensington

Kensington Wireless Presenter with Laser Pointer Betriebsanleitung

NEC

NEC DS1-MP10RX2 Betriebsanleitung

Logitech

Logitech R800 - Professional Presenter Presentation Remote... Bedienungsanleitung