Vaillant EcoTEC plus SERIES Bedienungsanleitung

Operating instructions

ecoTEC plus

VU 446/5-5 (H-GB)

VU 606/5-5 (H-GB)

GB, IE, NZ

Publisher/manufacturer

Vaillant GmbH

Berghauser Str. 40 D-42859 Remscheid

Tel. +49 21 91 18‑0 Fax +49 21 91 18‑2810

[email protected] www.vaillant.de

Contents

2Operating instructions ecoTEC plus 0020261390_01

Contents

1 Safety ............................................ 3

1.1 Action-related warnings ................. 3

1.2 Intended use .................................. 3

1.3 General safety information............. 4

2 Notes on the documentation ...... 8

2.1 Observing other applicable

documents ..................................... 8

2.2 Storing documents......................... 8

2.3 Validity of the instructions .............. 8

2.4 Benchmark..................................... 8

3 Product description..................... 9

3.1 Product design............................... 9

3.2 Displayed symbols......................... 9

3.3 Display ........................................... 9

3.4 Protecting the heating

installation against frost ............... 10

3.5 Data plate .................................... 11

3.6 CE label ....................................... 11

3.7 Energy Saving Trust Endorsed

Products....................................... 11

4 Operation.................................... 12

4.1 Operating concept ....................... 12

4.2 Adjustment and display levels ..... 12

4.3 Basic display................................ 12

4.4 Menu display................................ 13

4.5 Starting up the product ................ 13

4.6 Setting the language.................... 13

4.7 Opening the isolator devices ....... 13

4.8 Setting the heating flow

temperature ................................. 13

4.9 Setting the domestic hot water

temperature ................................. 13

4.10 Switching off the product's

functions ...................................... 14

5 Care and maintenance .............. 14

5.1 Caring for the product .................. 14

5.2 Maintenance ................................ 14

5.3 Draining the heating

installation.................................... 14

5.4 Guaranteeing the correct filling

pressure in the heating circuit...... 14

5.5 Checking the condensate

discharge pipe and tundish.......... 16

6 Troubleshooting ........................ 16

6.1 Reading maintenance

messages .................................... 16

6.2 Eliminating faults.......................... 16

6.3 Eliminating an ignition fault .......... 16

6.4 Displaying the status codes

(Live Monitor)............................... 16

7 Decommissioning...................... 16

7.1 Temporarily decommissioning

the product................................... 16

7.2 Permanently decommissioning

the product................................... 16

8 Recycling and disposal............. 16

9 Guarantee and customer

service ........................................ 17

9.1 Guarantee.................................... 17

9.2 Customer service......................... 17

Appendix ............................................... 18

A End user level –overview ......... 18

B Status codes –Overview........... 18

C Fault codes................................. 19

D Troubleshooting ........................ 19

Safety 1

0020261390_01 ecoTEC plus Operating instructions 3

1 Safety

1.1 Action-related warnings

Classification of action-re-

lated warnings

The action-related warnings

are classified in accordance

with the severity of the pos-

sible danger using the following

warning signs and signal words:

Warning symbols and signal

words

Danger!

Imminent danger to life

or risk of severe personal

injury

Danger!

Risk of death from electric

shock

Warning.

Risk of minor personal

injury

Caution.

Risk of material or envir-

onmental damage

1.2 Intended use

There is a risk of injury or death

to the user or others, or of dam-

age to the product and other

property in the event of im-

proper use or use for which it

is not intended.

This product is a heat gener-

ator that has been specially de-

signed for closed heating in-

stallations.

Intended use includes the fol-

lowing:

–observance of the operating

instructions included for the

product and any other system

components

–compliance with all inspection

and maintenance conditions

listed in the instructions.

This product can be used by

children aged from 8 years

and above and persons with

reduced physical, sensory or

mental capabilities or lack of

experience and knowledge if

they have been given supervi-

sion or instruction concerning

use of the product in a safe way

and understand the hazards in-

volved. Children must not play

with the product. Cleaning and

user maintenance work must

not be carried out by children

unless they are supervised.

Any other use that is not spe-

cified in these instructions, or

use beyond that specified in this

document shall be considered

improper use. Any direct com-

mercial or industrial use is also

deemed to be improper.

Caution.

Improper use of any kind is

prohibited.

1 Safety

4Operating instructions ecoTEC plus 0020261390_01

1.3 General safety

information

1.3.1 Installation by

competent persons only

The installation, inspection,

maintenance and repair of the

product, as well as the gas ratio

settings, must only be carried

out by a competent person.

1.3.2 Danger caused by

improper operation

Improper operation may present

a danger to you and others, and

cause material damage.

▶Carefully read the enclosed

instructions and all other ap-

plicable documents, particu-

larly the "Safety" section and

the warnings.

▶Only carry out the activities

for which instructions are

provided in these operating

instructions.

1.3.3 Risk of death from

escaping gas

Applicability: Except Great

Britain, Except Ireland

What to do if you smell gas in

the building:

▶Avoid rooms that smell of

gas.

▶If possible, open doors and

windows fully and ensure

adequate ventilation.

▶Do not use naked flames (e.g.

lighters, matches).

▶Do not smoke.

▶Do not use any electrical

switches, mains plugs, door-

bells, telephones or other

communication systems in

the building.

▶Close the emergency control

valve or the main isolator.

▶If possible, close the gas isol-

ator cock on the product.

▶Warn other occupants in the

building by yelling or banging

on doors or walls.

▶Leave the building immedi-

ately and ensure that others

do not enter the building.

▶Alert the police and fire bri-

gade as soon as you are out-

side the building.

▶Use a telephone outside the

building to inform the emer-

gency service department of

the gas supply company.

1.3.4 Risk of death from

escaping gas

Applicability: Great Britain

OR Ireland

What to do if you smell gas in

the building:

▶Avoid rooms that smell of

gas.

Safety 1

0020261390_01 ecoTEC plus Operating instructions 5

▶If possible, open doors and

windows fully and ensure

adequate ventilation.

▶Do not use naked flames (e.g.

lighters, matches).

▶Do not smoke.

▶Do not use any electrical

switches, mains plugs, door-

bells, telephones or other

communication systems in

the building.

▶If it is safe to do so, close the

emergency control valve or

the main isolator.

▶If possible, close the gas isol-

ator cock on the product.

▶Warn other occupants in the

building by yelling or banging

on doors or walls.

▶Leave the building immedi-

ately and ensure that others

do not enter the building.

▶Notify the gas supply com-

pany or the National Grid

+44 (0) 800 111999 by tele-

phone once you are outside

of the building.

1.3.5 Risk of death due to

blocked or leaking flue

pipework

What to do if you smell flue gas

in the property:

▶Open all accessible doors

and windows fully to provide

ventilation.

▶Switch off the product.

▶Inform a competent person.

1.3.6 Risk of death due to

explosive and flammable

materials

▶Do not use the product in

storage rooms that contain

explosive or flammable sub-

stances (such as petrol, pa-

per or paint).

1.3.7 Risk of death due

to changes to the

product or the product

environment

▶Never remove, bridge or

block the safety devices.

▶Do not tamper with any of the

safety devices.

▶Do not damage or remove

any seals on components.

▶Do not make any changes:

–The product itself

–to the gas, air, water and

electricity supplies

–to the entire flue gas install-

ation

–to the entire condensate

drain system

–to the expansion relief valve

–to the drain pipework

–to constructional condi-

tions that may affect the

operational reliability of the

product

1 Safety

6Operating instructions ecoTEC plus 0020261390_01

1.3.8 Risk of death due to

cabinet-type casing

Cabinet-type casing can give

rise to dangerous situations

when used on a product which

is operated with an open flue.

▶Ensure that the product is

supplied with sufficient com-

bustion air.

1.3.9 Risk of poisoning

caused by insufficient

combustion air supply

Conditions: Open-flued opera-

tion

▶Ensure that there is a suffi-

cient combustion air supply.

1.3.10 Risk of corrosion

damage due to

unsuitable combustion

and room air

Sprays, solvents, chlorinated

cleaning agents, paint, adhes-

ives, ammonia compounds,

dust or similar substances may

lead to corrosion on the product

and in the air/flue pipe.

▶Ensure that the supply of

combustion air is always free

of fluorine, chlorine, sulphur,

dust, etc.

▶Ensure that no chemical sub-

stances are stored at the in-

stallation site.

1.3.11 Risk of material

damage caused by

frost

▶Ensure that the heating in-

stallation always remains in

operation during freezing con-

ditions and that all rooms are

sufficiently heated.

▶If you cannot ensure the op-

eration, have a competent

person drain the heating in-

stallation.

1.3.12 Risk of injury and

material damage due

to maintenance and

repairs carried out

incorrectly or not

carried out at all

▶Never attempt to carry out

maintenance work or repairs

on your product yourself.

▶Faults and damage should

be immediately rectified by a

competent person.

▶Adhere to the maintenance

intervals specified.

1.3.13 Starting up the product

▶Only start up the product

once the casing has been

completely closed.

1.3.14 Risk of material

damage

The product's casing is not

designed to withstand loads.

There is a risk that it will be-

Safety 1

0020261390_01 ecoTEC plus Operating instructions 7

come deformed due to the ef-

fect of bearing weight.

▶Do not place any objects on

the product.

2 Notes on the documentation

8Operating instructions ecoTEC plus 0020261390_01

2 Notes on the

documentation

2.1 Observing other applicable

documents

▶You must observe all operating instruc-

tions enclosed with the system compon-

ents.

2.2 Storing documents

▶Keep this manual and all other applic-

able documents safe for future use.

2.3 Validity of the instructions

These instructions apply only to:

Product article number

VU 446/5-5 (H-GB)

ecoTEC plus 0010021520

VU 606/5-5 (H-GB)

ecoTEC plus 0010021521

Gas Council Number

VU 446/5-5 (H-GB)

ecoTEC plus 41-694-28

VU 606/5-5 (H-GB)

ecoTEC plus 41-694-29

2.4 Benchmark

Applicability: Great Britain

Vaillant is a licensed member of the

Benchmark Scheme which aims to im-

prove the standards of installation and

commissioning of domestic heating and

hot water systems in the UK and to en-

courage regular servicing to optimise

safety, efficiency and performance.

Benchmark is managed and promoted

by the Heating and Hotwater Industry

Council. For more information visit

www.benchmark.org.uk.

▶Please ensure that the installer has fully

completed the Benchmark Checklist on

the inside back pages of the installation

instructions supplied with the product

and that you have signed it to say that

you have received a full and clear ex-

planation of its operation. The installer

is legally required to complete a com-

missioning checklist as a means of

complying with the appropriate Build-

ing Regulations (England and Wales).

All installations must be notified to Local

Area Building Control either directly or

through a Competent Persons Scheme.

A Building Regulations Compliance Certi-

ficate will then be issued to the customer

who should, on receipt, write the Notifica-

tion Number on the Benchmark Checklist.

This product should be serviced regularly

to optimise its safety, efficiency and per-

formance. The service engineer should

complete the relevant Service Record on

the Benchmark Checklist after each ser-

vice.

The Benchmark Checklist will be required

in the event of any warranty.

Product description 3

0020261390_01 ecoTEC plus Operating instructions 9

3 Product description

3.1 Product design

1 Plate with serial

number on the

rear

2 On and off but-

ton

3 Operator control

element

4 Installation loca-

tion for the op-

tional control

system

3.2 Displayed symbols

F.01

1 Display

2 Access to the

menu for addi-

tional information

3 Right selection

button

4button

5 Reset button

6 Chimney sweep

mode (for chim-

ney sweeps)

7button

8 Left selection

button

3.3 Display

F.01 1

1 Heating installa-

tion filling pres-

sure

2 Current heating

flow temperat-

ure, additional

information

3 Current assign-

ment of the right-

hand selection

button

3 Product description

10 Operating instructions ecoTEC plus 0020261390_01

4 Current assign-

ment of the left-

hand selection

button

5 Active operating

mode

6 Burner informa-

tion

Sym-

bol

Meaning Explanation

Burner operating

correctly

Burner on

bar

Current filling

pressure of the

heating installa-

tion

The dashed lines

show the permit-

ted range.

–Permanently

on: Filling

pressure in

the permitted

range

–Flashing:

Filling pres-

sure outside

the permitted

range

Domestic hot wa-

ter generation

active

–Permanently

on: Draw-off

mode before

burner is on

–Flashing:

Burner on in

draw-off mode

Heating mode

active

–Permanently

on: Heat de-

mand in heat-

ing mode

–Flashing:

Burner on in

heating mode

Maintenance re-

quired

Information on

the maintenance

message in the

"Live Monitor"

Summer mode

active

Heating mode is

switched off

Burner anti-cyc-

ling time is active

To avoid the

need for frequent

switching on and

off (increases the

product's service

life).

Sym-

bol

Meaning Explanation

F. X X

Fault in the

product

Appears instead

of the basic

display, may be

an explanatory

plain text display.

3.4 Protecting the heating

installation against frost

3.4.1 Frost protection function

Caution.

Risk of material damage due

to frost.

The frost protection function

cannot guarantee circulation

through the entire heating in-

stallation. Under certain circum-

stances, there is therefore a risk

of frost to certain parts of the

heating installation, which may

cause damage.

▶During a period of frost, en-

sure that the heating installa-

tion remains in operation and

that all rooms are sufficiently

heated, even when you are

away.

Note

To ensure that the frost protection

devices remain ready for operation,

the boiler must be switched on.

If the heating flow temperature falls below

5 °C when the on/off button is switched

on, the product starts up and heats the

circulating water on the heating side to

approx. 30 °C.

Andere Handbücher für ecoTEC plus SERIES

Inhaltsverzeichnis

Andere Vaillant Kessel Handbücher

Vaillant

Vaillant ecoTEC plus VUI Bedienungsanleitung

Vaillant

Vaillant turboMAX plus 2 E Series Bedienungsanleitung

Vaillant

Vaillant ecoMAX SERIES Benutzerhandbuch

Vaillant

Vaillant ecoTEC exclusive 832 Bedienungsanleitung

Vaillant

Vaillant ecoTEC plus VU 446/5-5 (H-GB) Bedienungsanleitung

Vaillant

Vaillant TURBOmax Plus SERIES Bedienungsanleitung

Vaillant

Vaillant Vantage 120 Bedienungsanleitung

Vaillant

Vaillant ecoTEC SERIES Bedienungsanleitung

Vaillant

Vaillant TURBOmax Pro 28/2 E Benutzerhandbuch

Vaillant

Vaillant ecoTEC plus SERIES Bedienungsanleitung

Vaillant

Vaillant ecoTEC plus VU Series Bedienungsanleitung

Vaillant

Vaillant ecoTEC plus SERIES Bedienungsanleitung

Vaillant

Vaillant recoVAIR VAR 260/4 Bedienungsanleitung

Vaillant

Vaillant ecoTEC exclusive 620 Bedienungsanleitung

Vaillant

Vaillant ecoTEC exclusive Bedienungsanleitung

Vaillant

Vaillant VIH S GB 210/2 S Bedienungsanleitung

Vaillant

Vaillant aroSTOR VWL BM 200/5 Bedienungsanleitung

Vaillant

Vaillant timeSWITCH 150 Technisches Datenblatt

Vaillant

Vaillant ecoFIT sustain 800 Series Bedienungsanleitung

Vaillant

Vaillant TURBOmax Plus SERIES Benutzerhandbuch

Vaillant

Vaillant AutoCompact VSC D 4 Series Bedienungsanleitung

Vaillant

Vaillant COMBlcompact VCW 242E Bedienungsanleitung

Vaillant

Vaillant ecoTEC plus Benutzerhandbuch

Vaillant

Vaillant ecoFIT sustain 415 Bedienungsanleitung

Beliebte Kessel Handbücher anderer Marken

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung

Radiant

Radiant R2K 55 Handbuch