3
ENG
3. Installaon Instrucons:
Baery indicator
Charging the Baery:
1.Use the car power adaptor to connue charging the baery through the USB port.
2. You can also use the digital USB cable to charge the baery through your computer.
4. TF card Installaon and Removal:
1.Insert the card into the slot in accordance with the instrucons.
2.Gently push the card, then slowly release it (to avoid having the card eject). The card can
be removed from the rear.
3.Please pay aenon to the direcon of the TF card when you insert it. Inserng it the
wrong way may damage the device and the TF card.
4.We suggest that you use at least a Class 6 card (SDHC card).
5. Product Operaon Guide:
Turning the camera on and off
1.Turning it on: There are two methods for turning it on; manually and using the car power
supply:
Manually: When it is in the off state, press the “on/off” buon for a few seconds. When it
turns on it will automacally enter recording mode.
Using the car power supply: When it is in the off state connect the car adapter, it will switch
on and go straight into recording mode.
Note: If there is no card in the device, when it turns on the LCD screen will display “no
card”.
2.Turning it off: There are two methods for turning it off; manually and removing the car
power supply.
Manually: When it is on the on state press and hold the “on/off” buon.
Removing the car power supply: When you remove the car power supply all recordings will
be saved, then it will switch off automacally.
3.Recording: Aer you switch the camera on, it will go directly into recording mode, and the
above icon will be displayed in the top right of the screen, the boom of the screen
will show the recording me. Press the “ok” buon to save the files and stop the recording,
the device will then enter standby mode. At the same me the boom of the screen will
display the recording me when it was stopped. The recordings will then be saved onto the
card.
