Vallon VMH3CS Bedienungsanleitung

Vallon GmbH • Arbachtalstr. 10 •72800 Eningen • Germany

Phone: +49-7121-98550 • Fax: +49-7121-9855-100 •

[email protected] • www.vallon.de

Searching with Excellence

METAL DETECTOR

VMH3CS

Software Version 1.14_click

OPERATION MANUAL

Issue 07/2007

Metal Detector VMH3CS – Operation Manual

Notes concerning the Electromagnetic Compatibility (CE)

This detector corresponds to class B according to EC-guideline 89/336/EWG.

If the detector is used in accordance with the regulations, changes of the

electromagnetic surroundings are measured and indicated.

Therefore, the detector cannot suppress all noise frequencies. In worst case other

electronic instruments may release false alarms due to their radiated emissions.

A further functional disorder – not recognizable by the operator – does not occur.

Metal Detector VMH3CS – Operation Manual

CONTENTS

1. GENERAL APPLICATION.................................................................................. 5

2. DESIGN FEATURES .......................................................................................... 7

2.1 Detector Electronics................................................................................................................. 9

2.2 Search Head with Telescopic Pole....................................................................................... 11

2.3 Headset with textile ribbon (optional accessory) ............................................................... 12

3. OPERATION..................................................................................................... 13

3.1 Individual Alarm Configurations........................................................................................... 15

3.2 Switching ON and OFF and Program Settings.................................................................... 16

3.2.1 Confidence Click............................................................................................................. 16

3.3 Fine Adaptation to Mineralized Soil...................................................................................... 17

3.3.1 Automatic Fine Adaptation to Mineralized Soil............................................................... 17

3.3.2 Manual Fine Adaptation to Mineralized Soil................................................................... 18

3.3.3 Important Notes.............................................................................................................. 19

3.4 Setting the Detection Sensitivity .......................................................................................... 20

3.5 Operational Readiness, Sensitivity Test Piece ................................................................... 21

3.6 Checking the Battery Capacity Level................................................................................... 22

4. AUDIO ALARM SIGNALS DURING OPERATION........................................... 23

4.1 Full Battery Charge Signal (Simulation)............................................................................... 23

4.2 Battery Charge Signal with 50 % of Capacity (Simulation)................................................ 23

4.3 Low Battery Charge Signal (Simulation).............................................................................. 24

4.4 Detector "Non Functioning" Signal (Simulation)................................................................ 24

4.5 Typical Target Detection Signals.......................................................................................... 25

5. VISUAL SIGNALS ............................................................................................ 28

5.1 Visual Signals during Detection ........................................................................................... 28

5.2 Visual Error Messages, Cause and Remedy ....................................................................... 30

6. VIBRATION SIGNALS DURING THE DETECTION WORK............................. 31

7. PRACTICAL DETECTION WORK.................................................................... 32

7.1 Pinpointing.............................................................................................................................. 32

Metal Detector VMH3CS – Operation Manual

7.2 Detection in Non-Overgrown Areas with the Oval Search Head....................................... 33

7.3 Detection in Overgrown Areas with the Oval Search Head ............................................... 33

7.4 Detection in Waters................................................................................................................ 34

8. Simultaneous operation of two DETECTORS in close vicinity ................... 35

9. DATA input / DATA OUTPUT.......................................................................... 36

9.1 Computer aided UXO detection ............................................................................................ 36

9.2 Firmware Upgrade.................................................................................................................. 36

APPENDIX A – LIST OF AUDIO SIGNALS 37

APPENDIX B – SHORT INSTRUCTIONS 38

APPENDIX C – TECHNICAL DATA 40

APPENDIX D – DIMENSIONAL DRAWINGS 42

APPENDIX E – SPARE PARTS 43

APPENDIX F – UXO SEARCH HEAD (OPTIONAL ACCESSORY) 47

APPENDIX G – STICK PROBE (OPTIONAL ACCESSORY) 55

Metal Detector VMH3CS – Operation Manual

1. GENERAL APPLICATION

The use of the Metal Detector in accordance with the regulations is the

detection of metal parts in mines or in ammunition or explosive ordnance in

the ground and in shallow water. The search head must be moved above the

ground in such a way that obstacles like grass, stones, branches or explosive

ordnances are not touched.

ATTENTION: Danger of Explosion.

Do not use the metal detector for scanning persons.

The Metal Detector is consisting of two parts: control unit with telescopic pole

and a pluggable oval search head. As an optional accessory a large UXO

search head or a stick probe can be connected.

The oval search head is recommended for the detection of metal mines and

plastic mines with minimum metal content as well as other small metal parts.

The large UXO search head is recommended for the detection of shells,

bombs and other ammunition in larger depths.

The stick probe is recommended for detection even in hollow spaces, bushes

and trusses of hay.

The detector has been designed for the highly accurate detection of all types

of ferrous and non-ferrous metals. Ease of operation and a rigid and compact

mechanical design ensure very reliable operation for professional ordnance

clearing in battlefield operations and rigorous military training programs.

Along with its digital signal processor the metal detector uses the function

principle of an advanced pulse-field specially improved by Vallon. It can work

also in strongly mineralized soils, like laterite, magnetite, magmatite as well as

in shallow water (salt and fresh water) and under the electromagnetic

influence of main power lines without affecting the detector’s sensitivity too

much.

The metal detector ready for service, including accessories, is delivered in a

rigid carrying bag.

Metal Detector VMH3CS – Operation Manual

WARNING

The Metal Detector detects metals only. Each audio signal may indicate a

mine with metal content or an UXO. Mines containing only small metal parts

with very special metallic alloy may eventually not be detected. Mines without

any metal part will not be detected.

Before starting detection work make the performance test as described in

chapter 3.5.

WARNING

DO NOT USE THE METAL DETECTOR FOR LOCATING MAGNETICALLY

INFLUENCED MUNITIONS.

Some of the known mines of NATO-countries will not be activated, provided

the detector is equipped with non-magnetic batteries. For detection of mines of

other manufacturers it is recommended to test in advance whether they are

detectable before the operator starts the detection work.

Metal Detector VMH3CS – Operation Manual

2. DESIGN FEATURES

The Metal Detector VMH3CS, packed ready for service, consists of the

following main components:

(1) Detector electronics with integrated arm-rest, battery compartment,

ON/OFF switch for two different ground conditions, non-magnetic

loudspeaker and vibrator. Integrated two-piece telescopic carrying bar

with plug-in connection for search head

Hand grip with LED-bargraph (14 elements), 4 rigid push buttons for

sensitivity control, volume control, ground compensation and pinpoint

function

(2) Carrying bar with watertight oval search head and plug-in connection to

the control unit

(3) Test piece (non-magnetic)

(4) 3 EA batteries (single-cell batteries IEC R 20 à 1,5 V)

(5) Operation manual

(6) Field manual

(7) Field backpack

Fig. 2-1 Field Backpack

4 1

Metal Detector VMH3CS – Operation Manual

Optional Accessories: (available on request)

(8) Non-magnetic, watertight headset

(please refer to chapter 2.3)

(9) Rechargeable batteries, 3 ea (D-size),

(not shown)

(10) Multisource charging set (not shown)

(11) Hard case

(12) UXO search head with carrying bag

(13) Stick Probe

Fig. 2-2 Optional Accessories

Metal Detector VMH3CS – Operation Manual

2.1 Detector Electronics

1 2 3 4

6 7 8

Fig. 2-3 Detector Electronics

(1) Hand grip (6) Mode selector

(2) Indication and operation elements (7) Battery compartment

(3) Loudspeaker (8)Lockof

(4) Arm-rest battery compartment

(5) Connector

The detector electronics (Fig. 2-3) contains a battery compartment (Fig. 2-3/7)

for 3 batteries (alkaline mono cells, or Ni-MH-accumulators), which can be

replaced easily.

The distance between arm-rest (Fig. 2-3/4) and hand grip (Fig. 2-3/1) can

continuously be adjusted according to the operator’s height.

The detector is switched ON and OFF by means of the mode selector (Fig. 2-

3/6) on the front panel. For optimal detection two different soil programs can

be selected.

Inhaltsverzeichnis

Andere Vallon Metalldetektor Handbücher

Vallon

Vallon VMW1 Bedienungsanleitung

Beliebte Metalldetektor Handbücher anderer Marken

Garrett

Garrett MAGNASCANNER CS 5000 Bedienungsanleitung

Valex

Valex 1800200 Bedienungsanleitung

Gauss

Gauss MIL MD Bedienungsanleitung

Velleman

Velleman CS130 Bedienungsanleitung

Sears

Sears 321.596370 Bedienungsanleitung

Eriez

Eriez X8 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-22 Bedienungsanleitung

Zircon

Zircon MetalliScanner m60c Bedienungsanleitung

nalanda

nalanda MD027 Bedienungsanleitung

REV Ritter

REV Ritter CB-7005 Bedienungsanleitung

Minelab

Minelab F1A4 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs F70 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-12 Bedienungsanleitung

GOLDEN MASK

GOLDEN MASK 5 Bedienungsanleitung

Grizzly

Grizzly YM 203 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs 1280-X Aquanaut Bedienungsanleitung

Treasure Cove

Treasure Cove Vibra-Probe 560 Bedienungsanleitung

Accurate Locators

Accurate Locators XL16 IMAGER Bedienungsanleitung