ValueStore US WS-360 Bedienungsanleitung

WWW.VALUESTORE.US | CustomerCare@ValueStore.Us

Version: 1.5 - 2014

Wireless Alarm System

WS-360.

With mini cellular module

USER GUIDE

Alarm System Overview

Main Features:



Link up to 124 wireless sensors to the alarm system.



The system can alert to up to 5 mobile numbers by SMS or by Phone Call when the alarm

system is triggered.



Arm and Disarm the system remotely via the text message (SMS), the system will reply to

you by an SMS confirmation.



Diverse ways to Arm\Disarm the system: from Main Panel, by SMS, Wireless Keypad or

Remote Control.



Zone number is displayed in the keypad’s LCD screen when an alarm or trouble condition

occurs on a sensor.



Supports GSM, 2G, 3G and 4G SIM cards.

Technical Specifications:



Working power: AC 100-230V, DC 12V 1A.



Backup battery: Built-in Lithium 3.7V 800mAH (rechargeable).



Cellular module: 4-Band (GSM, 2G, 3G and 4G). GSM transmit power: 2W.



Receiving and emitting frequency: 868 MHz.



Working condition: Temperature: -10ºC ~ 50ºC, Humidity: ＜80%.



Main Paneldimension: 6.61×4.4×1.02(inch).

Alarm System Overview

Front side:

Back side:

Basic Steps to Setup Your Alarm System

STEP 1: Set date and time.

1. How to setup Time and Date. Page 5

STEP 2: Link sensors to the system and how to install them.

1. Remote Control. Page 7

2. Panic Button. Page 8

3. Gas Detector. Page 9

4. Smoke Detector. Page 10

5. Entry Sensor. Page 11

6. Motion Detector. Page 12

7. Outdoor Siren. Page 13

8. Indoor Siren. Page 14

STEP 3: Setup phone numbers for alarm notification and SIM card installation.

1. How to setup phone numbers. Page 16

STEP 4: Learn how to arm and disarm the alarm system.

1. How to arm or disarm the system from:

a. Main Panel. Page 18

b. Remote Control. Page 19

c. Mobile Phone (by SMS). Page 19

STEP 5: Learn additional features of the alarm system.

1. Siren On/ Off (Silence Alarm Mode). Page 21

2. Arm/ Disarm Beep. Page 22

3. Upload Status. Page 23

4. How to change the Code/ Password. Page 23

5. User ID. Page 24

6. Alarm History. Page 24

7. Status History. Page 24

8. Zone Attribute Page 25-26

9. Entry Delay/ Exit Delay Page 27

10. Set Smart Zone Page 28

Sensor List Installation and Notes Page 29-30

STEP 1:

How to setup time?

Please follow the next steps:

1. Press: “ENT”.

2. Enter Code: “888888” (this is the default password).

3. Select: “Set Time” use the arrows  to find the option in the menu.

4. Press: “ENT”.

5. Delete the old record by pressing the arrow .

6. Enter Time: HH/MM/SS. Example: it is 13 hours, 25 minutes and 15 seconds please enter:

132515

7. Press: “ENT”.

8. Done!

How to setup date?

Please follow the next steps:

1. Press: “ENT”.

2. Enter Code: “888888” (this is the default password).

3. Select: “Set Date” use the arrows  to find the option in the menu.

4. Press: “ENT”.

5. Delete the old record by pressing the arrow .

6. Enter Date: YY/MM/DD/W. Example: today is 2014 year, 11 month and 22 day and 6

Saturday (Sunday is “0”, Monday is “1” and so on) . please enter: 1411226

NOTE: Monday = 1

Tuesday = 2

Wednesday = 3

Thursday = 4

Friday = 5

Saturday = 6

Sunday = 0

7. Press: “ENT”.

8. Done!

STEP 2:

Important Notice:

If you have bought a pre-programmed kit you will not need to link any sensor to the

system because they have been already linked; in this case please proceed to set each

sensor in the areas you want to protect.

The Alarm System has a Neutral Zone and 3 Zone Types:

1. Neutral Zone: In this zone are linked all remote controls and keypads.

2. Emergency Zone: In this zone are linked all sensors that will be able to trigger the

alarm system whether is Arm or Disarm. What sensors are in the Emergency Zone?

-Panic Buttons.

-Smoke Detectors.

-Gas Detectors.

3. Perimeter Zone: In this zone are linked all sensors that will be able to trigger the

alarm system only when the system is Armed Home. What sensors are in the

Perimeter Zone?

-Entry Sensors (Door/Window Contact).

4. Motion Zone: In this zone are linked all sensors that will be able to trigger the alarm

system only when the system is Armed Away. What sensors are in the Motion Zone?

-Motion Detectors (P.I.R).





Now that you understand the Zone Types, please link the sensors to the

Alarm System in the corresponding Zone Number.

In the next pages you will find a step by step of how to link each sensor;

once all sensors are linked, proceed to set them in the areas you want to

protect.

How to link the sensors to the alarm system?

1. Remote Control:

How to install:

The remote control is ready to use, you need to do nothing.

Just use it the same way to lock or unlock your car or like a portable panic button.

You can link maximum 4 Remote Controls to the system. The zone number for the Remote Controls

is “00”.

Please follow the next steps to link the sensor to the system:

1. Press: “ENT”.

2. Enter Code: “888888” (this is the default password).

3. Select: “Program Sensor” use the arrows  to find the option in the menu.

4. Press: “ENT”.

5. Delete the old record by pressing the arrow .

6. Enter “Zone Number”: 00

7. Press: “ENT”.

8. Enter “Group Number.”: Delete the old record by pressing the arrow .

9. Enter “0” for the first remote control, “1” for the second remote control, “2” for the third

remote control and “3” for the fourth remote control.

10. Press “ENT”.

11. Choose “ActivateSensor” and press: “ENT”.

12. When appears: “Learning”, Trigger the remote control two times by pressing any other

buttons from the remote control.

13. It will appear on the screen: “Success” in case of “Failure” please repeat the process one

more time.

14. Done!

2. Panic Button:

How to install:

Activate the panic button from the back side of it and proceed to set it with the

strips or fix it with screws anywhere you want to have a panic button (we

recommend to install it in the master bedroom or office desk).

You can link maximum 4 Panic Buttons to the system. The zone number for the Panic Button is “02”.

Each zone supports up to 4 sensors; in case you want to link more than 4 Panic Buttons you can use

the zone number: “05”, “06”, 07”, “08” and “09”.

Please follow the next steps to link the sensor to the system:

1. Press: “ENT”.

2. Enter Code: “888888” (this is the default password).

3. Select: “Program Sensor” use the arrows  to find the option in the menu.

4. Press: “ENT”.

5. Delete the old record by pressing the arrow .

6. Enter “Zone Number”: 02

7. Press: “ENT”.

8. Enter “Group Number.”: Delete the old record by pressing the arrow .

9. Enter “0” for the first panic button, “1” for the second panic button, “2” for the third panic

button and “3” for the fourth panic button.

10. Press “ENT”.

11. Choose “ActivateSensor” and press: “ENT”.

12. When appears: “Learning”, Trigger the panic button two times by pressing the red button.

13. It will appear on the screen: “Success” in case of “Failure” please repeat the process one

more time.

14. Done!

3. Gas Detector:

How to install:

We recommend to set the gas detector in your kitchen or corridors, this sensor will

send an alarm notification in case of a gas leakage so you and your family can

evacuate the area before deadly gases get in to any bedroom.

You can link maximum 4 Gas Detectors to the system. The zone number for the Gas Detector is “03”.

Each zone supports up to 4 sensors; in case you want to link more than 4 Gas Detectors you can use

the zone number: “05”, “06”, 07”, “08” and “09”.

Note: You will need a lighter (the one used to light a cigarette) in order to trigger the Gas Detector

during the programming procedure.

Please follow the next steps to link the sensor to the system:

1. Press: “ENT”.

2. Enter Code: “888888” (this is the default password).

3. Select: “Program Sensor” use the arrows  to find the option in the menu.

4. Press: “ENT”.

5. Delete the old record by pressing the arrow .

6. Enter “Zone Number”: 03

7. Press: “ENT”.

8. Enter “Group Number.”: Delete the old record by pressing the arrow .

9. Enter “0” for the first Gas Detector, “1” for the second Gas Detector, “2” for the Gas

Detector and “3” for the fourth Gas Detector.

10. Press “ENT”.

11. Choose “ActivateSensor” and press: “ENT”.

12. When appears: “Learning”, Trigger the Gas Detector two times by letting escape gas from

the lighter very close to de device during two seconds twice.

13. It will appear on the screen: “Success” in case of “Failure” please repeat the process one

more time.

14. Done!

4. Smoke Detector:

How to install:

We recommend to set the smoke detector in the ceiling of your kitchen,

corridors or any room of your home, this sensor will send an alarm

notification in case of any detection of smoke, so you and your family can

react on time or evacuate the area before is too late.

You can link maximum 4 Smoke Detectors to the system. The zone number for the Smoke Detector is

“04”. Each zone supports up to 4 sensors; in case you want to link more than 4 Smoke Detectors you

can use the zone number: “05”, “06”, 07”, “08” and “09”.

Note: open the Smoke Detector and connect the battery before you follow the steps.

Please follow the next steps to link the sensor to the system:

1. Press: “ENT”.

2. Enter Code: “888888” (this is the default password).

3. Select: “Program Sensor” use the arrows  to find the option in the menu.

4. Press: “ENT”.

5. Delete the old record by pressing the arrow .

6. Enter “Zone Number”: 04

7. Press: “ENT”.

8. Enter “Group Number.”: Delete the old record by pressing the arrow .

9. Enter “0” for the first smoke detector, “1” for the second smoke detector, “2” for the smoke

detector and “3” for the fourth smoke detector.

10. Press “ENT”.

11. Choose “ActivateSensor” and press: “ENT”.

12. When appears: “Learning”, Trigger the smoke detector two times by pressing the small black

button(for two seconds) in the front of the smoke detector.

13. It will appear on the screen: “Success” in case of “Failure” please repeat the process one

more time.

14. Done!

Andere Handbücher für WS-360

Inhaltsverzeichnis

Andere ValueStore US Sicherheitssystem Handbücher

ValueStore US

ValueStore US WS-360 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung