Vantec UGT-UC302CB Bedienungsanleitung
2-Port SuperSpeed USB 3.0
ExpressCard/34
User’s Manual
Model: UGT-UC302CB
Rev. 1.0
All brand names and trademarks are properties of their respective owners.
www.vantecusa.com
Description
Features and Benefits
The Vantec 2-Port SuperSpeed USB 3.0 ExpressCard/34
upgrades any laptop computer to the newest USB 3.0
standard. Whether you have an ExpressCard/34 slot or an
ExpressCard/54 slot, the Vantec 2-Port SuperSpeed USB 3.0
ExpressCard will fit either slot with the bonus adapter that is
included. Integrated with the latest SuperSpeed USB 3.0
technology, transferring files to an USB 3.0 external hard disk
is faster than ever with transfer speeds of up to 5Gbps. Back
up important data such as HD video, high resolution photos to
an external USB 3.0 in a fraction amount of time. Backwards
compatible, the 2-Port SuperSpeed USB 3.0 ExpressCard/34
allows the use of USB 2.0 and USB 1.1 devices making this
card truly versatile. Upgrading your laptop to the newest USB
3.0 technology has never been so easy with the Vantec 2-Port
SuperSpeed USB 3.0 ExpressCard/34.
Blazing Fast Tranfer Speeds of up to 5Gbps
10x Faster than USB 2.0
Two USB 3.0 Ports to Support Multiple Devices
Supports ExpressCard/34 and ExpressCard/54
Notebooks
Supports Hot-Swap: Plug & Play devices without
Rebooting
Backwards Compatible with USB 2.0 and 1.1 Devices
Page 2
UGT-UC302CB
Specifications
System Requirements
Windows® XP/Vista/7 (32/64 bit)
CD-ROM drive may be needed for drivers.
ExpressCard/34 enabled computer system w/ available
ExpressCard/34 slot.
ExpressCard/54 enabled computer system w/ available
ExpressCard/54 slot.
Package Contents
2-Port SuperSpeed USB 3.0 ExpressCard/34
34mm to 54mm Adapter
User’s Manual
Driver CD
x 1
x 1
x 1
x 1
Page 3
Model:
Ports:
Dimensions:
OS Support:
UGT-UC302CB
2 x External USB 3.0 Ports (Backwards
Compatible with USB 2.0 & 1.1)
116 x 40 x 15mm (w/o ExpressCard/54
Adapter)
116 x 54 x 18mm (w/ ExpressCard/54
Adapter)
Microsoft Windows® XP/Vista/7 (32/64 bit)
UGT-UC302CB
UGT-UC302CB
Layout
Hardware Installation
Before installing the 2-Port SuperSpeed USB 3.0
ExpressCard/34, make sure the laptop is powered off
before installing the ExpressCard.
Verify and make sure you have an empty ExpressCard
slot avaliable and confirm whether the ExpressCard Slot
is either a 34 or 54mm slot.
1.
2.
Page 4
Before installing the Vantec 2-Port SuperSpeed USB 3.0
ExpressCard/34, please see the photo below highlighting the
available USB 3.0 ports of the card.
P1
P2
P5
P3
P4
P1 & P2: USB 3.0 Ports
P3: ExpressCard Connector
P4: 34mm to 54mm Adapter
P5: Standard 5V Power Port (optional)
UGT-UC302CB
Hardware Installation
If you have an ExpressCard/34 slot, please proceed and
skip to Step 5. If you have an ExpressCard54 Slot please
be sure to install the adapter that is provided.
Take the adapter and slide the metal latch out and attach
the adapter to the 2-Port SuperSpeed USB 3.0
ExpressCard/34.
3.
4.
Carefully slide in the 2-Port SuperSpeed USB 3.0
ExpressCard/34 into the empty ExpressCard slot.
USB 3.0 drivers are needed for the ExpressCard to work
correctly so please remember to install the USB 3.0 driver
that are on the included driver cd or it can be downloaded
from our website www.vantecusa.com.
5.
6.
Page 5
1. 2. 3.
4.
34mm to 54mm Adapter Installation
UGT-UC302CB
Hardware Installation
You have successfully installed the 2-Port SuperSpeed
USB 3.0 ExpressCard/34.
7.
Driver Installation
Please follow the following steps for driver installation.
When you are booting up the laptop with the new
hardware installed, Windows will automatically detect and
display the 'Found New Hardware Wizard'.
Cancel the automatic driver installation and run the
Setup.exe located on the Driver CD. Setup.exe can also
be downloaded from our website www.vantecusa.com.
Run installer setup.exe on Driver CD X:\UGT-UC302CB\.
(where X is the drive path for your CD-ROM drive)
When installation of the driver is complete, please reboot
the system to complete the driver installation.
1.
2.
3.
4.
5.
Page 6
Note: When drivers have been successfully installed,
you may check if installation was successful within
Device Manager and will be shown as “NEC Electronics
USB 3.0 Host Controller”.
UGT-UC302CB
Warranty
Page 7
The 2-Port SuperSpeed USB 3.0 ExpressCard/34 comes with
a 1 year limited warranty (90 day parts). If your unit becomes
defective within that time frame, please go to
www.vantecusa.com for information on how to receive
warranty exchange or repair. Cosmetic defects and missing
parts are not covered under this warranty. Please check the
contents of the unit to make sure you received all parts. Also,
check for any cosmetic flaws. If any parts are missing or if there
are cosmetic defects, please contact the retailer from which
you purchased the unit immediately and ask for a replacement.
Vantec Thermal Technologies
43951 Boscell Rd., Fremont, CA 94538
tel: 510-668-0368 fax: 510-668-0367
website: www.vantecusa.com
Inhaltsverzeichnis
Andere Vantec Computerhardware Handbücher
Vantec
Vantec UGT-PC20PL Bedienungsanleitung
Vantec
Vantec Spectrum Fan Card SP-FC70-BL Bedienungsanleitung
Vantec
Vantec Aeroflow FX 120 VAF-1225 Bedienungsanleitung
Vantec
Vantec UGT-UF100 Bedienungsanleitung
Vantec
Vantec UGT-ST450CB Bedienungsanleitung
Vantec
Vantec UGT-UC312CB Bedienungsanleitung
Vantec
Vantec UGT-IS602R Bedienungsanleitung
Vantec
Vantec UGT-CR945 Bedienungsanleitung
Vantec
Vantec Slot Protector Kit SPK-08UV-BK Bedienungsanleitung
Vantec
Vantec Hard Drive Cooling System Vortex 2 Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
