Vaporfi VOLT Bedienungsanleitung

Inhaltsverzeichnis

Andere Vaporfi Verdampfer Handbücher

Vaporfi

Vaporfi V-GRIP 220 Bedienungsanleitung

Vaporfi

Vaporfi PRO II Bedienungsanleitung

Vaporfi

Vaporfi V-GRIP Bedienungsanleitung

Vaporfi

Vaporfi VAIO 80 TV Bedienungsanleitung

Vaporfi

Vaporfi VOX 60 TC Bedienungsanleitung

Vaporfi

Vaporfi Rebel Bedienungsanleitung

Vaporfi

Vaporfi VEX 150 TC Bedienungsanleitung

Vaporfi

Vaporfi VOX 80 TC Bedienungsanleitung

Vaporfi

Vaporfi PULSE Bedienungsanleitung

Vaporfi

Vaporfi VAIO 75 TC Bedienungsanleitung

Vaporfi

Vaporfi VAIO 75 TC Bedienungsanleitung

Vaporfi

Vaporfi VOLT 2 Bedienungsanleitung

Vaporfi

Vaporfi VEX 75 TC Bedienungsanleitung

Vaporfi

Vaporfi AIR 2 Bedienungsanleitung

Vaporfi

Vaporfi ATOM Bedienungs- und Wartungsanleitung

Beliebte Verdampfer Handbücher anderer Marken

Vivant

Vivant Dabox Pro Bedienungsanleitung

Pulsar

Pulsar Triad Bedienungsanleitung

Smok

Smok MAG Bedienungsanleitung

Puzhen

Puzhen Bamboo Bedienungsanleitung

XVAPE

XVAPE FOG PRO Bedienungsanleitung

DaVinci

DaVinci MIQRO Bedienungsanleitung

iQOS

iQOS lil SOLID 2.0 Bedienungsanleitung

CHART

CHART VaporMan 125 Bedienungsanleitung

InnoCigs

InnoCigs EGRIP 2 LIGHT Bedienungsanleitung

OOZE

OOZE Movez Bedienungsanleitung

STORZ & BICKEL

STORZ & BICKEL Volcano Hybrid Gebrauchsanweisung

STEAMAX

STEAMAX STICK X8 Bedienungsanleitung

Storz & Bickel GMBH

Storz & Bickel GMBH Crafty Bedienungsanleitung

Joyfect

Joyfect Freaky One Bedienungsanleitung

SIGELEI

SIGELEI 213 FOG Bedienungsanleitung

Eleaf

Eleaf Lemo 2 Bedienungsanleitung

Vapor Brothers

Vapor Brothers VB Eleven Pen Bedienungsanleitung

STORZ & BICKEL

STORZ & BICKEL VOLCANO CLASSIC Bedienungsanleitung

USER MANUAL

ENGLISH • ESPAÑOL

VAPORFI™ VOLT TANK

Thanks for your purchase of the VaporFi Volt Tank! In order to use

this tank correctly, effectively and with absolute safety, please follow

the instructions in this manual.

WHAT’S INCLUDED:

» 1 x Volt Tank (4.5ml)

» 1 X OCC Sub Ohm 0.5Ω/ Range 15-30 W

» 1 x OCC 1.2Ω/ Range 12-25 W

» 2 x RBA 0.5ΩCoil

» 1 x Japanese Organic Cotton

» 1 x Mini RBA Base

» 1 x Pyrex Glass Tube

» 1 x Screw Driver

» 2 x Screws

» 1 x User Manual

REFILLING E-LIQUID

1. Turn tank upside down and unscrew the base by turning it

counterclockwise.

2. Point and pour the e-liquid onto the sides of the tank (Do not overfill.

E-liquid should be just below the center tube).

3. Screw the base back onto the tank by turning the base clockwise until

you feel resistance (make sure not to over tighten).

4. Let the tank sit for 1 minute to allow the wick to saturate.

CHANGING THE ATOMIZER HEAD

Atomizers generally last 1-3 weeks depending on

individual usage. When you notice that the flavor

and/or vapor have diminished, you experience a burnt

taste, it may be time to change your atomizer.

1. Remove the tank from the battery and turn the tank

upside down.

2. Unscrew the base of the tank by turning it

counterclockwise.

3. Unscrew the atomizer by turning it counterclockwise.

4. Screw replacement atomizer onto the base by

turning it clockwise.

SWITCH TO REBUILDABLE DECK

1. Remove the base of the tank by turning it

counterclockwise.

2. Unscrew the replaceable atomizer by turning it

counterclockwise.

3. Screw rebuildable deck onto the main base by turning

the deck clockwise.

4. Pint and pour the e-liquid onto the sides of the tank (do

not overfill. Eliquid should be just below the center tube).

5. Screw the base of the tank by turning the base clockwise

until you fell resistance (make sure not to overtighten).

6. Point and pour the e-liquid onto the sides of the tank (Do

not overfill. E-liquid should be just below the center tube).

BUILDING YOUR COIL

Follow these quick and easy steps to build your Volt RBA. Begin by

creating a coil with the provided Kanthal Wire. Here’s how:

1. Cut a piece of Kanthal wire 6” in length.

2. Using the provided screwdriver, hold the screwdriver handle and the

Kanthal wire between your thumb and forefinger.

3. Then tightly wrap the wire around the metal part of the screwdriver.

Wrap the wire 10 times making sure the leads are in opposite

directions and are about 1/2 inch in length.

4. Straighten the leads to mount on the RBA.

5. You should now have a coil.

REBUILDING YOUR ATOMIZER

1. Remove the housing from the Rebuildable Deck.

2. Locate and loosen the post screws on the Rebuildable Deck by

turning it counterclockwise no more than 3 full turns. Make sure the

screws are not removed from the Deck.

3. Attach your coil to the Rebuildable Deck by wrapping the 1/2 inch

leads around the loosened post screws then tighten the screws by

turning clockwise to secure.

4. Cut off all excess wire from the post screws.

5. Cut a strip of the organic cotton about a 1/2 inch in width. Then, roll

tightly the cotton between your thumb and index finger until the

cotton is thin enough to easily slide through the center of the coil.