Vari Lite ICON BACK SYSTEM Bedienungsanleitung
IMPORTANT PRODUCT INFORMATION
ICON™ BACK SYSTEM
WITH VARILOCK™ HARDWARE
USER MANUAL
Important Note for Dealers:
Please provide the User or
Caregiver with this manual.
Important Note for ICON
Back System Users and
Caregivers: Please keep this
manual for future reference.
If you do not understand
this instruction manual or
if you have any questions,
please contact VARILITE
Customer Service at
(800) 827-4548 or
(206) 505-9500.
®
Page 2
Warnings pages 3-6
Operating Instructions pages 7-9
Thoracic Support Instructions page 10
Care and Maintenance page 11
Warranty page 12
Important Note for Suppliers: Please provide the User or Caregiver
with this manual.
Important Note for Icon Back System Users and Caregivers: Please
keep this manual for future reference.
If you do not understand this User Manual or if you have
any questions, please contact VARILITE Customer Service at
800.827.4548 or 206.505.9500.
This User Manual explains how to care for, maintain, and adjust
your Icon Back System.
Table of Contents
Page 3
User Manual
Installation and adjustment of your Icon Back
System should be performed only by an
authorized dealer or qualified therapist.
Failure to use the appropriate equipment for
restraint in a vehicle can result in serious injury
or death.
•NeveruseyourIconBackSystemifany
hardware is missing, malfunctioning, or broken.
Seek qualified assistance with any repairs or
adjustments.
•Neverexceedtheweightcapacityoftheback
support.
Themaximumuserweightforsystemsless
than 22 in. (55 cm) wide is 300 lbs (136 kg).The
maximumuserweightforsystems22in.(55cm)
or greater is 400 lbs (181 kg).
WARNING
TOAVOIDINJURY,read,understandandfollowallinstructions
and warnings in this manual before using your Icon Back System.
There are hazards associated with the use of wheelchairs and
adaptive equipment. If you misuse your wheelchair or your back
support you can be seriously injured.
Page 4
•Neverexceedtheweightcapacityofthewheelchair
as specified by the wheelchair manufacturer.
•Neverperformweighttrainingthatcausesyouto
exceedtheweightcapacityofthewheelchair.
•Donotexceedtheweightcapacityofthe
wheelchair during other activities of daily living.
•Neverliftthewheelchairbythebacksupport.
•Neverusethebacksupportwithoutitscover,the
cover is made with flame retardant materials.
Using the back support without its cover increases
the risk of flammability.
•Nevermodifyyour Icon Back System or use it in a
way not described by these instructions.
WARNING
WARNING
Do not leave Slide Caps in the open position. Doing so may
allow the Slide Brackets to disengage from the Holsters,
causing the back support to accidentally fall out, which can
result in serious injury.
Page 5
User Manual
WARNING
Wheelchair Compatibility
Icon Back Systems are designed to be compatible with most
wheelchairs,notingthefollowingexceptions:
The system can be used only with wheelchairs with
cane diameters equal to 1 in. (25 mm) or less.
The system can be used only with wheelchairs with
round canes.
Wheelchairs are not required to have stabilizer bars,
provided the canes can maintain their position.
Only use wheelchairs with round canes equal to 1 in.
(25mm) or less in diameter.
Failure to use compatible equipment can result in
equipment breakage and serious injury.
Page 6
This seating system has been dynamically tested and meets
requirementsofANSIWC20/Vol4andconformstoISO16840-4forthe
safe use of seating devices for use in motor vehicles when used with
a wheelchair base that complies with performance requirements of
ANSIWC19orISO7176-19.
A surrogate wheelchair base and Hybrid III Midsize Male ATD were
used in the frontal impact test.
Any postural support devices and belts that have not been
successfullytestedinaccordancewithANSI/RESNAWC18orWC19
should not be relied upon as an occupant restraint in a vehicle.
Failure to use the appropriate equipment for restraint in a vehicle can
result in serious injury or death.
For additional information regarding the use of seating systems in
motor vehicles, refer to Safe Use in a Motor Vehicle provided with this
system and at www.varilite.com.
Use in a Motor Vehicle
For Icon Back System Tall and Icon Back System Deep:
WARNING
Page 7
User Manual
Operating Instructions
RemovingtheIconBackSystem
1. Depress buttons and slide the right and left Slide
Caps open, away from the Shell. (Fig. 1)
2. Grab the top of the shell and lift up until the Slide
Bars clear the Holster.* (Fig. 2)
3. Slide the right and left Slide Caps shut, towards
the Shell.
*Note: When Permanent Mount Screws are engaged the
Slide Brackets cannot be removed from the Holster.
Fig. 1
Fig. 2
Page 8
Installing Icon Back System
1. Depress buttons and slide the right and left Slide Caps
open, away from the Shell. (Fig. 3)
2. Align the Slide Brackets above the track of the Holsters.
3. Insert the Slide Brackets into the Holsters. (Fig. 4)
4. Slide the right and left Slide Caps shut, towards the
Shell.
Fig. 3
Fig. 4
Page 9
User Manual
Inflating Cushion
1. To inflate cushion, remove load from cushion.
2. Open air valve by turning valve counterclockwise.
3. When cushion is fully inflated, close air valve by turning
valve clockwise.
Adjusting Cushion
1. To adjust the air level of the Icon Back System Cushion,
begin with the cushion fully inflated and the valve closed.
2. Position wheelchair user securely in wheelchair.
3. Turn the valve counterclockwise to open the valve and
release air.
4. Close the valve when the air level that provides the
support needed for the user’s comfort and functionality is
reached.
Removing Cushion
1. Pull the cushion up to detach the cover from the shell.
2. Detach the Handle Flap from the Handle Patch on the
inside of the Shell and pull the Handle Flap through the
slot in the shell.
3. Removethebackcushionfromtheattachedaponthe
inside of the cover.
Page 10
Thoracic Support Instructions
Yourbacksystemmayincludeoptional VARILITE PAL™ Swing-
Away thoracic supports.
To initiate swing, depress the silver button and swing the pad
bracket away from the user. (Fig. 5)
The bracket is locked into place when an auditory click is heard
andthebuttonisfullyextended.(Fig. 6)
Fig. 5 Fig. 6
•Washpadcoversincoldwater.Airdry.
•Clean metal parts with soft cloth and isopropyl alcohol.
Do not use soap-based products.
•NEVERoilthehingemechanism.
Operating Instructions:
Maintenance:
Andere Handbücher für ICON BACK SYSTEM
2
Inhaltsverzeichnis
Andere Vari Lite Rollstuhl Handbücher
Vari Lite
Vari Lite Evolution Bedienungsanleitung
Vari Lite
Vari Lite PAL Kurzanleitung
Vari Lite
Vari Lite ICON BACK SYSTEM Bedienungsanleitung
Vari Lite
Vari Lite Reflex Bedienungsanleitung
Vari Lite
Vari Lite ICON BACK SYSTEM Bedienungsanleitung
Vari Lite
Vari Lite VARILITE Bedienungsanleitung
Vari Lite
Vari Lite Icon JUNIOR Back Support Bedienungsanleitung
Vari Lite
Vari Lite JUNIOR Bedienungsanleitung
Vari Lite
Vari Lite Reflex Bedienungsanleitung
Vari Lite
Vari Lite JUNIOR Bedienungsanleitung
