VARO Powerplus POWX11831 Bedienungsanleitung

 POWX11831 EN 
Copyright © 2020 VARO NV P a g e | 1www.varo.com 
1APPLICATION..................................................................................2 
2DESCRIPTION(FIG.1)......................................................................2 
3PACKAGE CONTENT LIST.............................................................2 
4SYMBOLS........................................................................................2 
5GENERAL POWER TOOL SAFETY WARNINGS ..........................3 
5.1 Work area ................................................................................................................3 
5.2 Electrical safety.......................................................................................................3 
5.3 Personal safety .......................................................................................................3 
5.4 Power tool use and care.........................................................................................4 
5.5 Service.....................................................................................................................4 
6ADDITIONAL SAFETY INSTRUCTIONS FOR HAMMER DRILLS 4 
7BEFORE USING THE TOOL FOR THE FIRST TIME.....................5 
7.1 Fitting and changing tools (Fig. 2).........................................................................5 
7.2 Removing SDS-Max tool.........................................................................................5 
8OPERATION.....................................................................................5 
8.1 Switching ON/OFF...................................................................................................5 
8.2 Handle attachment (Fig. 3)......................................................................................5 
8.2.1 D-handle...................................................................................................................5 
8.2.2 Side handle...............................................................................................................6 
8.3 Use (Fig. 4................................................................................................................6 
9CLEANING AND MAINTENANCE...................................................6 
9.1 Cleaning...................................................................................................................6 
10 TECHNICAL DATA..........................................................................6 
11 NOISE...............................................................................................7 
12 SERVICE DEPARTMENT................................................................7 
13 STORAGE ........................................................................................7 
14 WARRANTY.....................................................................................8 
15 ENVIRONMENT ...............................................................................8 
16 DECLARATION OF CONFORMITY ................................................9 

POWX11831 EN

DEMOLITION HAMMER 1300W

POWX11831

1 APPLICATION

The machine is intended for hammer drilling in concrete, brick and stone, as well as for light

chiseling work.

Not suitable for professional use.

Warning! Read this manual and general safety instructions carefully before

using the appliance, for your own safety. Your power tool should only be

passed on together with these instructions.

2 DESCRIPTION(FIG.1)

1. SDS Chuck

2. Fastening sleeve

3. Auxiliary handle

4. Oil cover

5. Collar of auxiliary handle

6. Lock on button

7. (Anti Vibration System)

8. On/off switch

9. Handle

3 PACKAGE CONTENT LIST

▪Remove all packing materials

▪Remove remaining packaging and transit supports (if existing)

▪Check the completeness of the packing content

▪Check the appliance, the power cord, the power plug and all accessories for transportation

damages.

▪Keep the packaging materials as far as possible till the end of the warranty period.

Dispose it into your local waste disposal system afterwards.

WARNING Packing materials are no toys! Children must not play with

plastic bags! Danger of suffocation!

▪Demolition hammer 1300W

▪2 x auxiliary handle

▪Spanner

▪Grease cup

- SDS point chisel: 320mm

- SDS flat chisel: 18 x 320mm

When parts are missing or damaged, please contact your dealer.

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Read manual before use

In accordance with essential

requirements of the European

directive(s)

Class II - The machine is

double insulated; Earthing wire

is therefore not necessary.

Always wear safety goggles

POWX11831 EN

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings and instructions

may result in electric shock, fire and/or serious injury. Save all warnings and instructions for

future reference. The term "power tool" in the warnings refers to your mains operated (corded)

power tool or battery operated (cordless) power tool.

5.1 Work area

▪Keep work area clean and well lit. Cluttered and dark areas invite accidents.

▪Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or

fumes.

▪Keep children and bystanders away while operating a power tool. Distractions can cause

you to lose control.

5.2 Electrical safety

Always check that the power supply corresponds to the voltage on the

rating plate.

▪Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

▪Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is earthed or

grounded.

▪Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

▪Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

▪When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

▪If operating a power tool in a damp location is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces the risk of electric shock.

5.3 Personal safety

▪Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or

medication. A moment of inattention while operating power tools may result in serious

personal injury.

▪Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used whenever conditions require

will reduce personal injuries.

▪Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying power tools with your finger on the switch or plugging in power tools that have

the switch on invites accidents.

▪Remove any adjusting key or wrench before turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool may result in personal injury.

▪Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

▪Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

POWX11831 EN

▪If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related

hazards.

5.4 Power tool use and care

▪Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

▪Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

▪Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

▪Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users.

▪Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

▪Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

▪Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the

working conditions and the work to be performed. Use of the power tool for operations

different from intended could lead to a hazardous situation.

5.5 Service

▪Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

6 ADDITIONAL SAFETY INSTRUCTIONS FOR HAMMER DRILLS

▪Check the voltage (volt) marked on the rating plate.

▪When using cable drums, run all the cable off the drum. Minimum conductor cross section:

1.0 mm².

▪When using the electric hammer drill outdoors, connect to the power supply with a type

H07RN-F 3G 1.5 mm² extension cable and rain-water-protected plugs in proper working

order.

▪Make sure of your footing on ladders and scaffolding when drilling free-handed.

▪Use a line detector to localize lines in walls with concealed electric, water or gas lines.

Avoid touching live components or conductors.

▪Wear ear muffs to protect your hearing. Loss of hearing can be a gradual process!

▪Wear goggles and use a dust mask on jobs generating dust.

▪Do not use in areas where there are vapours or flammable liquids.

▪Always pull the plug out of the socket before cleaning or making changes to the machine.

▪Protect the power cable from damage. Oil and acid can damage the cable.

▪Never overload the machine.

▪Secure all workpieces sufficiently.

▪Important! It is imperative to follow all national safety regulations concerning installation,

operation and maintenance.

▪Chisel bits and drill bits may be flung out of the machine accidentally and cause serious

injury:

▪Before starting to work, always check that the chisel or drill bit is property locked in the

chuck.

▪Examine the chuck regularly for signs of wear or damage.

POWX11831 EN

▪Never start up a hammer tool until it pressed against a workpiece (wall, ceiling, etc.).

▪When you are finished, unplug the hammer drill from the electric supply and remove the

chisel or drill bit from the machine.

▪Always disconnect the hammer drill from the electric supply before you change a chisel or

drill bit.

▪Protect your eyes and other workers from flying particles and splinters. Wear a helmet! Set

up partition walls!

▪Wear work gloves to protect fingers from bruising and grazing.

▪Vibrations can injure the hand-arm system. Keep exposure to vibrations as short as

possible.

▪Always lead the mains cable away backwards from the device.

▪Store the device where it is inaccessible to children.

▪When carrying out work, always hold the device with both hands and ensure that you have

a stable standing position.

7 BEFORE USING THE TOOL FOR THE FIRST TIME

▪Examine the place where the device is to be used for hidden electrical cables, gas and

water pipes using a pipe finding device.

▪Before connecting to the mains, ensure care that the mains voltage corresponds to the

details on the rating plate.

▪Ensure that the power switch is in the OFF position. If the plug is connected to a mains

while the power switch is in the ON position, the power tool will start operating

immediately, which could cause serious accidents.

▪When the work area is removed from the power source, use an extension cord of sufficient

thickness and rated capacity. The extension cord should be kept as short as practicable.

7.1 Fitting and changing tools (Fig. 2)

The device is equipped with a SDS-Max attachment system.

▪Clean tools and grease with a thin layer of machine grease before fitting.

▪Pull back fastening sleeve and hold.

▪Push and rotate the dust-free tool into the tool holder as far as it will go. The tool will lock

automatically.

▪Check that it has locked by pulling the tool

7.2 Removing SDS-Max tool

Pull back fastening sleeve, hold and remove tool.

Accessories can be hot after use. Don’t touch the tip of accessory by hand!

Please always use protective gloves to remove accessory.

8 OPERATION

8.1 Switching ON/OFF

▪Switching on: Press the operating switch (8).

▪Switching off: Release the operating switch(8)

For continuous operation just press the lock-on button (6) on the left side of the handle. the

lock-on button can be release by pressing the switch trigger again.

8.2 Handle attachment (Fig. 3)

8.2.1 D-handle

For reasons of safety, only use the hammer drill with handle attachment.

You will be able to obtain a safe body position when working by rotating the handle attachment.

▪Install the fastening screw, camping block and frame successively onto the handle.

POWX11831 EN

▪Place the collar onto the collar mount and then let the two holes of collar at the both ends

of the clamping block.

▪Adjust the handle subassembly to a desire position, finally securely tighten the handle.

▪Remove the auxiliary handle subassembly in the opposite way.

8.2.2 Side handle

The auxiliary handle can be attached in two different mounting holes: left and right.

Remove the auxiliary handle subassembly in the opposite way.

8.3 Use (Fig. 4

▪After placing the tip of the tool on concrete surface, switch the tool ON.

▪By utilizing the weight of the machine and by firmly holding the demolition hammer with

both hands, you can control the subsequent recoil motion.

After long time of use, the cylinder case becomes hot. Therefore, be careful

not to burn your hands.

Don’t apply big pressure on the machine. The hammer mechanism is

activated by applying a slight pressure on the tool when the chisel bit is in

contact with the work-piece.

It is possible that some oil between drill and cylinder box could spray when

you’re ooperating the tool. Therefore, when you want to use the tool inside

a room, it’s recommended to use old newspapers or towels to cover the

floor and wall.

9 CLEANING AND MAINTENANCE

Attention !Before performing any work on the equipment, pull the power

plug.

9.1 Cleaning

▪Keep the ventilation slots of the machine clean to prevent overheating of the engine.

▪Regularly clean the machine housing with a soft cloth, preferably after each use.

▪Keep the ventilation slots free from dust and dirt.

▪If the dirt does not come off use a soft cloth moistened with soapy water.

Never use solvents such as petrol, alcohol, ammonia water, etc. These

solvents may damage the plastic parts.

10 TECHNICAL DATA

Rated Voltage

230-240 V

Rated Frequency

50 Hz

Rated Power

1300 W

Protection class

Impact rate

4100 min-1

Cable length

3 m + VDE plug

POWX11831 EN

11 NOISE

Noise emission values measured according to relevant standard. (K=3)

Acoustic pressure level LpA

89 dB(A)

Acoustic power level LwA

105 dB(A)

ATTENTION! Wear hearing protection when sound pressure is

over 85 dB(A).

aw (Vibration)

18,7 m/s²

K = 1,5 m/s²

12 SERVICE DEPARTMENT

▪Damaged switches must be replaced by our after-sales service department.

▪If the connecting cable (or mains plug) is damaged, it must be replaced by a particular

connecting cable which is available from our service department. Replacement of the

connecting cable must only be carried out by our service department (see last page) or by

a qualified person (qualified electrician).

13 STORAGE

▪Thoroughly clean the whole machine and its accessories.

▪Store it out of the reach of children, in a stable and secure position, in a cool and dry

place, avoid too high and too low temperatures.

▪Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

▪Don’t keep it in plastic bags to avoid humidity build-up.

POWX11831 EN

14 WARRANTY

▪This product is warranted for a 36-month period effective from the date of purchase by the

first user.

▪This warranty covers all material or production flaws excluding : batteries, chargers,

defective parts subject to normal wear & tear such as bearings, brushes, cables, and

plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects

resulting from maltreatment, accidents or alterations; nor the cost of transportation.

▪Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

▪We also disclaim all liability for any bodily injury resulting from inappropriate use of the

tool.

▪Repairs may only be carried out by an authorised customer service centre for Powerplus

tools.

▪You can always obtain more information at the number 00 32 3 292 92 90.

▪Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

▪At the same time, no claim can be made on the warranty if the damage of the device is the

result of negligent maintenance or overload.

▪Definitely excluded from the warranty is damage resulting from fluid permeation, excessive

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate

usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not

following the instructions given in the manual), inexpert assembly, lightning strike,

erroneus net voltage. This list is not exhaustive.

▪Acceptance of claims under warranty can never lead to the prolongation of the warranty

period nor commencement of a new warranty period in case of a device replacement.

▪Devices or parts which are replaced under the warranty therefore remain the property of

Varo NV.

▪We reserve the right to reject a claim whenever the purchase cannot be verified or when it

is clear that the product has not been properly maintained. (Clean ventilation slots, carbon

brushes serviced regularly, etc.).

▪Your purchase receipt must be kept as proof of date of purchase.

▪Your appliance must be returned undismantled to your dealer in an acceptably clean state,

(in its original blow-moulded case if applicable to the unit), accompanied by proof of

purchase.

15 ENVIRONMENT

Should your appliance need replacement after extended use, do not discard it

with the household rubbish but dispose of it in an environmentally safe way.

Waste produced by electrical machine items should not be handled like normal

household rubbish. Please recycle where recycle facilities exist. Check with your

Local Authority or retailer for recycling advice.

POWX11831 EN

16 DECLARATION OF CONFORMITY

VARO N.V. - Vic. Van Rompuy N.V.- Joseph Van Instraat 9 - BE2500 Lier - BELGIUM,

declares that,

Product : Demolition Hammer

Trade mark : POWERplus

Model : POWX11831

is in conformity with the essential requirements and other relevant provisions of the applicable

European Directives, based on the application of European harmonized standards. Any

unauthorized modification of the apparatus voids this declaration.

European Directives (including, if applicable, their amendments up to the date of signature);

2011/65/EU

2006/42/EC

2014/30/EU

2000/14/EC Annex V LwA

Measured 101dB(A)

Guaranteed 105dB(A)

Notified body: ISET

European harmonized standards (including, if applicable, their amendments up to the date of

signature);

EN60745-1 : 2009

EN60745-2-6 : 2010

EN55014-1 : 2017

EN55014-2 : 2015

EN61000-3-2 : 2014

EN61000-3-2 : 2013

Keeper of the Technical Documentation : Philippe Vankerkhove, VARO –Vic. Van Rompuy

N.V.

The undersigned acts on behalf of the company CEO,

Philippe Vankerkhove

Regulatory Affairs –Compliance Manager

Lier, 03/10/2019

Inhaltsverzeichnis

Andere VARO Krafthammer Handbücher

VARO

VARO Powerplus POWP3060 Bedienungsanleitung

Beliebte Krafthammer Handbücher anderer Marken

Kraissmann

Kraissmann 2000 AH 45 Bedienungsanleitung

Sumake

Sumake ST-2212/R Bedienungsanleitung

Makita

Makita HM1214C Bedienungsanleitung

Sumake

Sumake ST-2231/R Bedienungsanleitung

Stanley

Stanley STHM10 Bedienungsanleitung

RODCRAFT

RODCRAFT RC5030 Bedienungsanleitung

Villager

Villager VLN 1315 Bedienungsanleitung

Hitachi

Hitachi H 65SC Bedienerhandbuch

Hitachi

Hitachi H 65SB2 Bedienungsanleitung

socomec

socomec MDO 6000 TS Stücklistenhandbuch

Hitachi

Hitachi H 45MR Handbuch

Atlas Copco

Atlas Copco PB 6S Einrichtungshandbuch

Pattfield Ergo Tools

Pattfield Ergo Tools PA-1700SH Bedienungsanleitung

Coleman

Coleman Powermate 024-0075SP Bedienungsanleitung

Makita

Makita HR3210C Kurzanleitung

WilTec

WilTec JH95A Bedienungsanleitung

Master

Master MH 10-SE Bedienungsanleitung

Stark

Stark RH 1300 DB Bedienungsanleitung