EN
ENGLISH
5
on. A spanner left attached to a rotating part of the power
tool can cause personal injury.
5) Maintain posture and balance at all times. This allows
better control of the power tool in unexpected situations.
6) Dress appropriately. Do not wear inappropriate clothing
or jewellery. Keep your hair, clothing, and gloves away from
moving parts. Loose clothing, jewellery or long hair can get
caught in moving parts.
7) If devices are provided for the connection of dust extrac-
tion and collection facilities, ensure that they are connected
and used correctly. The use of these devices can reduce the
risks related to dust.
4 Electric tool, use with care
1) Do not force the tool. Use only for your application. The
right power tool will do the job better and safer at the right
speed.
2) Do not use the tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
3) Disconnect from power source and/or remove battery
pack before making any adjustments, changing acces-
sories or storing power tools. Such preventive safety mea-
sures reduce the risk of starting the power tool accidentally.
4) Store power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these ins-
tructions to use it. Power tools are dangerous in the hands
of untrained users.
5) Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may affect
operation. If damaged, it must be repaired before use.
Many accidents are caused by poor maintenance.
6) Properly maintained cutting tools with sharp cutting ed-
ges are easier to control.
7) Use the power tool, accessories, etc. according to these
instructions, taking into account the working conditions
and the work to be done. Use of the power tool for opera-
tions other than those intended could result in a hazardous
situation.
5 Use and Care of Battery Power Tool
1) Make sure the switch is off before inserting the battery.
Inserting the battery into the tools that have the switch on
causes accidents.
2) Recharge only with the charger specified by the manu-
facturer. A charger that is not suitable for a type of battery
may create a risk of fire.
3) Use power tools only with specifically designated bat-
teries. Use of any other battery may create a risk of injury
and fire.
4) When the battery is not in use, keep it away from other
metal objects such as paper, paper clips, coins, keys, nails,
screws or other small metal objects, which can be con-
nected from one terminal to another. Short-circuiting the
battery terminals may cause burns or fire.
5) Under abusive conditions, the battery may leak fluid;
avoid contact. If the liquid comes in contact with your eyes,
seek additional medical help. Liquid injected into the bat-
tery may cause irritation or dangerous burns and garves.
6 Service
Have a qualified technician repair your power tool using
only identical replacement parts. This will ensure that sa-
fety is maintained.
ADDITIONAL SAFETY RULES
1. Always use protective goggles, a cap and mask when
using the blower. Ordinary eye or sun glasses are NOT sa-
fety glasses.
2. Never point the nozzle at anyone in the vicinity when
using the blower.
3. Never block suction inlet and/or blower outlet.
-Do not block suction inlet or blower outlet to clean up in
dusty areas.
-Do not use the blower with a tapered nozzle smaller than
the original one, such as a new nozzle obtained by atta-
ching an extra diameter-reduced hose or smaller hose to
the nozzle top end.
-Do not Use the blower to inflate balls, rubber boat or the
similar.
Increased motor revolution may cause dangerous fan
breakage and result in serious personal injury. Heated mo-
tor and control circuit may cause a fire.
4.AVOID UNINTENTIONAL STARTING. Do not carry battery
fitted tool with finger on switch.
5.Some material contains chemicals which may be toxic.
Take caution to prevent dust inhalation and skin contact.
Follow material supplier safety data.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1.1. Before using battery cartridge, read all instructions and
cautionary markings on (1) battery charger, (2) battery, and
(3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter, stop
operating immediately. It may result in a risk of overhea-
ting, possible burns and even an explosion.
4. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It may
result in loss of your eyesight.
5. Do not short the battery cartridge: (1) Do not touch the
terminals with any conductive material. (2) Avoid storing
battery cartridge in a container with other metal objects
such as nails, coins, etc.
(3)Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow, overheating,
possible burns and even a breakdown.
6. Do not store the tool and battery cartridge in loca-
tions where the temperature may reach or exceed 50 º C
(122º F).
7. Do not incinerate the battery cartridge even if it is seve-
rely damaged or is completely worn out. The battery cartri-
dge can explode in a fire.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. Follow your local regulations relating to disposal of
battery.
SAVE THESE INSTRUCTIONS.
