vc999 PACKAGING plus CM610FB Anwendungshandbuch
CM610FB
OPERATION & PARTS MANUAL
VACUUM CHAMBER MACHINE
419 E. 11TH AVE. NORTH KANSAS CITY, MO 64116 USA
Safe Operation Practices
General Operation
炽Read, understand, and follow all instructions in the manual and on the machine before
starting. Keep this manual in a safe place for further and regular reference and for ordering
replacement parts.
炽Only allow people who familiar with the instructions to operate the machine. Be sure to
know controls and how to stop the machine quickly.
炽Do not put your hands near moving parts.
炽Remove all obstacles, which may interfere with the machine functions.
炽Clear the work area such as electrical wires, gloves, knives etc.
炽Be sure that everyone else is clear of your work area before operating the machine.
炽Do not sit nor stand on the machine.
炽Be sure turn off the machine after your work is finished. Never leave a running machine
unattended.
炽Always disconnect and wait until the machine has cooled before doing any maintenance.
炽Do not wear loose fitting clothes or jewelry as they may get caught in moving parts of the
machine.
炽Please wear security shoes, to avoid injury caused by moving the machine or objects falling
from the machine.
炽Never exceed the time limit to seal, which is suggested by the manufacturer. This is to avoid
any damage that may be caused to the sealing bars and to reduce the risk of fire in the
machine.
炽Never touch the sealing bars after they have been used, this will avoid corporal burns. Wait a
few minutes to let the machine cool down before touching.
炽Make sure the sealing bars are well installed in their “Guide Blocks” before starting package.
炽Never incline the machine more than 30 degrees, it may tip over and hurt someone seriously.
Your responsibility
This machine should only be operated by personal who can read, understand and respect
warnings and instruction regarding this machine in the owner’s manual.
CM610FB Operation & Parts Manual
1
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800 728-2999 • Sales@9&.com
Content
Chapter 1烉Safety precautions
1.1 Precautions of transportation, installation and packing
1.2 Precautions before and after machine starting
Chapter 2烉Overall description of the machine
2.1 Features of the machine
2.2 Function of the machine
2.3 Product proper for this machine
2.4 Usage life of the machine
2.5 Marking location and content description
2.6 Specification of the machine
Chapter 3烉Function description of the pushbuttons on
the panel
Chapter 4烉Instructions of operation
4.1 Operation sequence
Chapter 5烉Instructions of maintenance and
troubleshooting
5.1 Maintenance
5.2 Troubleshooting
Chapter 6烉Related environment and accessories of the
machine
6.1 Accessory
6.2 Airborne noise level
6.3 Storage condition
6.4 Operation environment
V1.01
&0)%2SHUDWLRQ3DUWV0DQXDO
2
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800 728-2999 • Sales@9&.com
Chapter 1烉Safety precautions
1.1 Precautions of transportation, installation and packing
1.1.1 Preparations before installation
1.1.1.1 Power requirement:
Voltage: Look at the nameplate
Current: Look at the nameplate
Frequency: 50/60Hz
Phase: 3Ø
1.1.1.2 Installation requirement
1.1.1.2.1 Prevent to install the machine in the environment full of dust and corrosive
atmosphere with acid and alkali.
1.1.1.2.2 Prevent to install the machine in the environment with abnormal vibration.
1.1.1.2.3 Prevent to install the machine under direct sunlight or near vapor. Such will
affect its vacuum degree.
1.1.1.2.4 The ground circuit should be independently or parallel.
1.1.1.2.5 Don’t install the machine in the potentially explosive atmosphere.
1.1.1.2.6 Installation space includes the requirement of the operator and machine
Length × Width × Height = 2M×2M×2.5M
&0)%2SHUDWLRQ3DUWV0DQXDO
3
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800 728-2999 • Sales@9&.com
&0)%2SHUDWLRQ3DUWV0DQXDO
4
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800 728-2999 • Sales@9&.com
1.1.2 Preparations during transportation
1.1.2.1 The weight of this machine is 180-220kg, so that the loading capacity of any
handling device is recommended to be more than 1000kg. If you are not sure of the
safe loading capacity, please contact the manufacturer of such handling device. If
the situation is clearly understood, don’t try to handle the machine by yourselves.
1.1.2.2 Either by lifting or by handling, it’s necessary to check the balance carefully in
advance.
1.1.2.3 The work of lifting or by handling should be carried out by means of qualified
operator.
1.1.2.4 During machine handling, any people or car is not allowed to approach the
surrounding of the machine.
1.1.2.5 During handling, notice that whether there is any person or barrier on the handling
path and the surrounding of the machine. If it is, clear it before machine handling.
1.1.3 Precautions during packing
1.1.3.1 Packing material: The base is wood and main part is cardboard box.
1.1.3.2 Packing sequence: Put the wood base on the ground. Then, put the machine on it.
Next, pack the machine with plastic film and put vibration-absorbing board around
the machine. Then, put the cardboard box on the machine. Use nails to fix the
cardboard box and wood base. At last, bind it with pp stripes.
1.2 Precautions before and after machine starting
1.2.1 Precautions before machine starting
1.2.1.1 Before using this machine, read and realize the contents of this manual in detail.
1.2.1.2 Check that whether the voltage is correct.
1.2.1.3 Confirm that whether the electric power and its rating is sufficient.
1.2.1.4 Check that whether all the safety related devices are normal, and notice that whether
anyone within the danger zone.
1.2.1.5 Visual check that whether all mechanical and electric parts are normal, and also
notice that whether the surrounding environment is clean.
1.2.1.6 Sequences of power on:
1.2.1.6.1 Turn on the factory power.
1.2.1.6.2 Turn on the main switch of the machine.(D-6)
&0)%2SHUDWLRQ3DUWV0DQXDO
5
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800 728-2999 • Sales@9&.com
1.2.2 Precautions after machine starting
1.2.2.1 Confirm that whether the display is correct.
1.2.2.2 Confirm that whether the sound coming from pump running is normal (refer to
clause 3.12.2).
1.2.2.3 Wear safety shoes, protection clothes and mask to ensure safety and hygiene of the
operator.
&0)%2SHUDWLRQ3DUWV0DQXDO
6
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800 728-2999 • Sales@9&.com
Chapter 2烉Overall description of the machine
2.1 Features of the machine
2.1.1 The machine main body is made of stainless steel with features of well endurance. Also,
it’s flat packing table design make easy loading/unloading and cleaning without space
limit.
2.1.2 The machine adopts high vacuum pump (imported from Europe) micro-computerized
auto control system with water-resistance design.
2.1.3 The machine is fitted with 10 sets of friendly memory function with independent display.
2.1.4 Equip with moving wheels (with brake device) for easy movement without limit of
environment.
2.1.5 It is adequate for any processing factory or laboratory.
2.2 Function of the machine
2.2.1 Keep food fresh, original taste, anti-septic
2.2.2 Extend the preservation limit.
2.2.3 Prevent humidity and stain on electronic and ironmongery components.
2.3 Product proper for this machine
2.3.1 Meat, sea-food, agriculture products, dehydrated food, herbs, vegetarian food, pickles
and spices.
2.3.2 Electronic components, ironmongery components, medical equipment, powder and
flavoring.
2.4 Usage life of the machine
2.4.1 Except the consumable parts, the machine’s intended usage life is 10 years.
2.4.2 Provide one year free maintenance and service after shipping. The date is calculated
from the end of installation.
2.4.3 We accept 18 month warranty at most, so that machine’s installation should be finished
in 6 month. After the warranty, we will charge for further maintenance service.
2.4.4 Free maintenance service doesn’t include consumable parts and vacuum oil.
&0)%2SHUDWLRQ3DUWV0DQXDO
7
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800 728-2999 • Sales@9&.com
2.4.5 If there is any abnormal or unstable situation during the warranty period, please inform
us or our agent. We will improve it immediately.
2.5 Marking location and content description
2.5.1 Nameplate: stuck on the right/upper side of the machine
2.5.2 Warning sign: stuck on the rear side of the machine
&0)%2SHUDWLRQ3DUWV0DQXDO
8
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800 728-2999 • Sales@9&.com
2.6 Specification of the machine
Type &0610
Machine dimension 700 x 570 x 975 mm
Vacuum chamber dimension 638 x 482 x 155 mm
Sealing line dimension 610mm x 2
Optional accessory Nitrogen filling function
Machine weight 200 kg
Motor 3 kW
Heater 2.2 kW
Available bag length 360mm
&0)%2SHUDWLRQ3DUWV0DQXDO
9
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 800 728-2999 • Sales@9&.com
Inhaltsverzeichnis
Andere vc999 Verpackungsanlagen Handbücher
