VDO AcquaLink A2C59501997 Bedienungsanleitung

AcquaLink - 7” TFT display

Instruction manual

v. 1.0

Contents

Getting started 4

Data pages 8

Data page configuration 12

General settings 18

System settings 20

Alarm management 24

Sensor configuration 29

Management of network devices 36

MediaBox use 41

VDO Marine Configuration Tool use 47

Troubleshooting 48

Technical specifications 50

Spare parts, sensors and accessories 51

Updated and multilingual instructions available

These instructions are always updated and available in several

languages at www.vdo-marine.com.

Accompanying documentation

The instructions for installing and using Nav Box and Nav Control are

available at www.vdo-marine.com, document codes:

lNav Box: A2C12119500

lNav Control: A2C99832800

Customer service and warranty

In the event of malfunction, fault or for information on the warranty,

contact a VDO partner. To find a partner, visit www.vdo-partner.com.

III

Getting started

Description

AcquaLink 7" is a multifunctional display connected to the VDO CAN bus network of the AcquaLink

system. The display lets you view data from the engines and the sensors connected to Nav Box through

NMEA 2000, NMEA 0183, SAE J1939 or directly connected through analog inputs. Up to four engines can

be monitored from the display.

The Nav Control remote control is necessary to interact with the display.

Operations

AcquaLink 7" is a versatile device. It lets you control all the engines connected to Nav Box in a single

monitoring point and at the same time.

Select the number of engines on the boat when first turned on or when reset. If the selected number of

engines is different from the installed engines, only the data of the selected engines will be displayed. The

number of engines can be changed later (see "Change the number of engines to be displayed" on page17).

Received signal priority

If the same data is transmitted by more than one signal for the same engine, the received signal priority is

the following:

1. Analog input

2. NMEA 2000

3. SAE J1939

4. NMEA 0183

On/Off

The on/off mode depends on the connection made during installation.

The VDO logo and software version followed by the AcquaLink logo appear when turned on. In addition, if

before turned off the display was controlled by Nav Control or if on the VDO CAN bus network there is only

one display, the Nav Control icon appears.

The display prompts you to select the type of boat and the number of engines to be monitored when first

turned on or when reset.

Function of the display buttons

Button Function

Briefly press:

lAccess favorite groups 1, 2 and 3.

Getting started

Function of the Nav Control buttons

Button Function

Hold down:

lTurn on/off Nav Control and all the devices connected to

the VDO CAN bus network

Briefly press:

lChange the display brightness level

Hold down:

lChange the color of the background and of the characters

on the display

Briefly press:

lReturn to the previous menu level

Hold down:

lReturn to the last data page displayed

Briefly press:

lAccess the display main menu

By briefly pressing and only when data pages are displayed:

lChange the favorite group to be displayed

By briefly pressing and only if there are several displays on

the network:

lChange the display to be controlled

Getting started

Button Function

By pressing both buttons:

lLock/unlock Nav Control

Knob By rotating the knob:

lScroll the menu items and display pages

Briefly press:

lOpen a sub-menu

lConfirm the selection

Configure the display

Following are the steps for initial configuration:

1. When turned on, indicate the type of boat and number of engines.

2. Set up general device operations (see "General settings" on page18 and "System settings" on

page20).

3. Configure the sensors connected to Nav Box (see "Sensor configuration" on page29).

4. Change/remove data pages selecting the best layout and data to be viewed (see "Data page

configuration" on page12).

5. Enable/disable the alarms on the VDO CAN bus, NMEA 2000 and SAE J1939 networks (see "Alarm

management" on page24).

Getting started

Data pages

What are data pages

Data pages display data received from the various sources. The pages are grouped into four favorites

groups, which can contain up to eleven pages each. Groups configuration is free, and a page can be

inserted into more than one group. In addition, the ALL VALUES group contains all the available data

pages, which vary according to the number of engines connected to Nav Box.

The default setting displays the four favorite groups with eleven pages each and the ALL VALUES group.

Possible operations

To scroll the pages, rotate the Nav Control knob or scroll your finger horizontally across the screen. To

change the favorite group, press on Nav Control or scroll your finger up and down on the screen. To

add/delete/edit pages, see "Data page configuration" on page12.

Shared features

Part Description

AID of the monitored engine and

parameter name

BData page content

CStatus bar with favorite group

and unit of measure

Managed data

Information Unit of measure

Engine rpm rpm

Engine boost pressure bar, psi, kPa

Engine coolant temp °C, °F

Engine coolant pressure bar, psi, kPa

Engine oil temp °C, °F

Engine oil pressure bar, psi, kPa

Engine exhaust temp °C, °F

Engine hours h

Engine trim %

Gear oil temp °C, °F

Gear oil pressure bar, psi, kPa

Fuel %

True heading °

Course over ground °

App wind speed (AWS) m/s, km/h, kn, bft

App wind angle (AWA) °

True wind speed (TWS) m/s, km/h, kn, bft

True wind angle (TWA) °

True wind direction (TWD) °

Depth below transducer m, ft, fath

Data pages

Information Unit of measure

Depth below keel m, ft, fath

Depth below waterline m, ft, fath

Tilt (Roll/Pitch) °

Speed over ground (SOG) km/h, mph, kn

Sumlog (STW) km/h, mph, kn

Avg speed through water km/h, mph, kn

Velocity made good km/h, mph, kn

Distance through water km, mi, nm

Trip through water km, mi, nm

Time h:m:s

Race timer h:m:s

Coordinates Degrees Minutes (DM)

Battery voltage V

Battery current A

Rudder angle °

Fresh water level %

Waste water level %

Sea water temp °C, °F

Ambient temp °C, °F

Barometer hPa, mmHg, inHg

True set angle °

Data pages

Inhaltsverzeichnis

Andere VDO Monitor Handbücher

VDO

VDO OCEANLINK - Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung